Post on 20-Feb-2020
에너지시스템연구부
부산대학교 기계기술연구원 RESEARCH INSTITUTE OF MECHANICAL TECHNOLOGY24 25
학회 활동학회 활동
기타 활동
기계공학부
가스터빈 연구실
기계공학부
발전에너지시스템연구실
Changmin.son@pusan.ac.kr Tel. 051-510-2321
jxs704@pusan.ac.kr Tel. 051-510-7330
연구분야
터빈 공기역학 및 열전달 / 터보 발전기 공기역학 및 열전달
항공기 및 발전설비 시스템 모델링
수상
Kenneth Harris James Prize 2016 – Best Paper Award in Aerospace Division,
Institute of Mechanical Engineers, United Kingdom, 23 May 2017
Rolls-Royce: Sir Henry Royce Awards for Technical Innovation 2009
-High Value Patent Award (US Patent No. 6688110)
연구분야
액상 이산화탄소-미분탄 슬러리 분무 및 열분해
석탄 가스화 및 연소
가스오븐 버너 점화 및 화염안정성 연구
수상
Outstanding poster award, CSS13 Symposium, 2011
Outstanding paper award, Korean Society of Mechanical Engineers, 2011
대표연구 대표연구•터빈 공기역학 및 열전달 •LCO2/미분탄 슬러리의 분무특성 분석
–분무특성 가시화
–급속비등에 의한 cavitation현상 규명
–분사온도 및 압력차에 따른 영향 분석
•터보 발전기 공기역학 및 열전달
•LCO2/미분탄 슬러리의 점화 및 열분해특성 분석
– LCO2/미분탄 슬러리 공급시스템 개발
–운전조건에 따른 합성가스 발생률 비교
–점화 특성 가시화
•항공기 및 발전설비 시스템 모델링
•가스오븐 버너 점화 및 화염안정성 연구
–운전조건에 따른 점화모드 분석
–화염속도 및 화염면 측정
–화염속도와 CO emission상관관계 도출
주요연구실적
주요연구실적
• S. W. Hwang, C. Son, D. Y. Seo, D. H. Rhee, B. J. Cha, “Comparative Study on Steady and Unsteady Conjugate Heat Transfer of a High
Pressure Turbine Blade”, Applied Thermal Engineering, 2016, Vol. 99, pp. 765–775
• H. W. Namgoong, P. Ireland, C. Son, “Optimisation of a 180° U-shaped Bend Shape for a Turbine Blade Cooling Passage Leading to a
Pressure Loss Coefficient of Approximately 0.6”, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace
Engineering, 2016, Vol. 230, No. 8, pp. 1371–1384
• W. K. Yoo, S. Y. Jeon, J. S. Yang, D. H. Ahn, S. H. Kim, K. H. Hwang, S. H. Ha, C. Son, “Full Surface Heat Transfer Characteristics of Rotor
Ventilation Duct of a Turbine Generator”, Applied Thermal Engineering, 2015, Vol. 94, pp. 385–394
• Modeling of kerosene combustion under fuel-rich conditions,” Advances in Mechanical Engineering, 2017, Vol. 9(7) 1–11
• Spray Formation of a Liquid Carbon Dioxide-Water Mixture at Elevated Pressures,” Energies 2016, 9, 948
• Dynamic characteristics between waves and a floating cylindrical body connected to a tension-leg mooring cable placed in a simulated
offshore environment,” International Journal of Naval Architecture and Ocean Engineering 8(2016) 375-385
• Flash spray characteristics of a coal-liquid carbon dioxide slurry,” Korean J. Chem. Eng., 33(5), 1612-1619(2016)
• One-Dimensional Modeling of an Entrained Coal Gasification Process Using Kinetic Parameters,” Energies 2016, 9, 99
주요연구과제
주요연구과제
• 1단 Vane Advanced 3D Profile Cascade 시험, Doosan Heavy Industries & Construction, 2017.11~2018.11
• 발전기냉각설계, Doosan Heavy Industries & Construction , 2013.02~2018.12
• 고효율 가스터빈용 초고온 고압 터빈 시스템 원천 기술 개발 GET-Future H3TS 연구실, Korea Institute of Energy Technology Evaluation
and Planning(KETEP), 2013.06~2017.05
• 고압 터빈 공력 현상 및 냉각 채널 설계/해석 시험, Agency for Defense Development(ADD), 2013.12~2015.12
• 추진기관 액체로켓엔진 후연소 및 복사열 저감기구에 대한 연구, 연구재단, 2015.9~2017.12, 2억4천만원
(가스발생기, 후연소, soot저감)
• 액상이산화탄소-미분탄 슬러리의 점화 및 연소특성 규명, 연구재단, 2017.06~2020.05, 1억5천만원(LCO2. ignition, pyrolysis)
• 고압 저등급탄-이산화탄소 슬러리의 유동특성 및 탈휘발 메카니즘 규명, 연구재단, 2012.03~2015.02, 1억5천만원(LCO2, 분무, 유동)
• Member-ASME IGTI Heat Transfer Committee(2006~)
• Associate Editor – The Proceedings of Institute of Mechanical Engineers, Part C; Journal of Mechanical Engineering Science, 2015
• 한국자동차 공학회 편집위원
• 기계학회 부산지부 위원
• Technology Advisor – Doosan Heavy Industry & Construction(Changwon, Korea), 2015~
• Member of Technology Advisory Board – LG Fuel Cell Systems(Ohio, USA), 2013~2015
• Overseas Advisory Board – Korea Institute of Machinery and Materials, 2010~2011
손 창 민 교수 송 주 헌 교수