Post on 16-Dec-2015
description
0
REA
INFO
RMT
ICA
1
MOUSE
2
PRESENTACIN PANTALLA INICIAL DE AUTOCAD
REA GRFICA BARRAS DE
HERRAMIENTAS
BARRA DE
ESTADOS
BARRA DE DESPLAZAMIENTO
SISTEMA DE COORDENADAS
MENS DESPLEGABLES
CURSOR
LNEA DE
COMANDOS
3
COMANDOS DE DIBUJO
LNEA
Permite crear lneas seleccionando el punto de inicio y trmino de un vector. Secuencia:
Lnea de comandos: Ingresa el usuario: Command: L
Enter Line From point: Clic (P1) To point: Clic (P2) To point: Clic (P3) To point: Clic (P4) To point: Clic (P5) To point: Enter
Command:
P1
P3
P4
P2
P5
4
CIRCLE
Permite crear circunferencias, ingresando el radio o el dimetro.
Secuencia:
Lnea de comandos: Ingresa el usuario: Command: C
Enter CIRCLE 3P/2P/TTR/: P1 Diameter/ : 25
Enter
Command:
SELECCIN DEL CENTRO
P1
CRCULO CON RADIO 25
R 25
5
RECTANG
Permite crear rectngulos seleccionando dos puntos diagonalmente opuestos.
Secuencia: Lnea de comandos: Ingresa el usuario:
Command: REC Enter
RECTANGLE Chamfer/Elevation/Fillet/Thickness/Width/: Clic (P1) Other corner: @50,25(P2)
Enter
Command:
SELECCIN DEL PRIMER PUNTO
DISTANCIA RECTANGULO
P1
5010
25
6
POLYGON
Crea polgonos regulares inscritos y circunscritos, seleccionando la cantidad de lados e ingresando su centro mediante un clic.
Secuencia:
Lnea de comandos: Ingresa el usuario: Command: POL POLIGON Number of sides : 5
Enter Edge/: Clic (P1) Inscribed in circle/Circumscribed about circle (I/C) :
Enter
Radius of circle: 25 Enter
Command:
SELECCIN DEL CENTRO
PENTGONO INSCRITO
DE RADIO 25
R 25
P1
7
MTEXT
Permite ingresar texto en los dibujos.
Secuencia:
Lnea de comandos: Ingresa el usuario: Command: MT
Enter MTEXT Current text style: STANDARD. Text height:
2.5 Enter
Specify first corner: Clic (P1) Specify opposite corner or [Height/Justify/Rotation/Style/Width]:
Clic (P2)
Command:
SELECCIN DE PUNTOS
INGRESO DEL TEXTO Y SELECCIONAR OK
P1
P2
8
ARC
Permite crear arcos.
Secuencia:
Lnea de comandos: Ingresa el usuario: Command: ARC
Enter Center/: Clic (P1) Center/End/: Clic (P2) End point:: Clic (P3)
Command:
INGRESO DE LOS PUNTOS
P1
ARCO TERMINADO
P2
P3
9
COMANDOS DE EDICIN
ERASE
Este comando permite eliminar las entidades grficas existentes.
Secuencia:
Lnea de comandos: Ingresa el usuario: Command: E
Enter ERASE Select objects: Clic (P1) 1 found Enter Command: Lnea de Comandos: Ingresa el Usuario: Command: E
Enter ERASE Select objects: Other corner: Clic (P1)
Clic (P2) 3 found Enter
Select objects:
Command:
SELECCIN DE OBJETO
P1 SELECCIN DE UN
OBJETO
P1
SELECCIN DE VARIOS OBJETOS
P2
10
OFFSET
Permite crear circuitos concntricos, lneas paralelas y curvas paralelas, de acuerdo a un valor que ingrese el usuario.
Secuencia:
Lnea de comandos: Ingresa el usuario:
Command: O Enter
OFFSET
Offset distance or Through : 5 Enter
Select object to offset: Clic (P1)
Side to offset? Clic (P2)
Select object to offset: Enter
Command:
P1 SELECCIN DEL OBJETO
P2
LADO DONDE SER LA
COPIA
OBJETO COPIADO A 5
UNIDADES
5
11
TRIM
Este comando permite cortar entidades grficas, de acuerdo a lmites definidos por objetos existentes.
Secuencia:
Lnea de comandos: Ingresa el usuario: Command: TR
Enter TRIM Select cutting edges: (Projmode = UCS, Edgemode = No extend) Select objects: Clic (P1) 1 found Select objects Enter /Project/Edge/Undo: Clic (P2) : /Project/Edge/Undo: Enter
Command:
SELECCIN DE OBJETO
P1
SELECCIONA LMITE
P2
ELIMINA
RESULTADO
12
COPY
Copia objetos de acuerdo a un punto de referencia seleccionado. Puede efectuar una o varias copias.
Secuencia:
Lnea de comandos: Ingresa el usuario: Command: CP
Enter COPY Select objects: Clic (P1) 1 found Enter Select objects: /Multiple: Clic (P2) Second point of displacement: Clic (P3)
Command:
SELECCIN DE OBJETO
SELECCIN DE
OBJETO
RESULTADO
SELECCIN PUNTO
REFERENCIA (CEN) P2
PUNTO DE
COPIA
P3
P1
13
EXTEND
Extiende objetos a lmites seleccionados.
Secuencia:
Lnea de comandos: Ingresa el usuario: Command: EX
Enter EXTEND Select boundary edges: (Projmode = UCS, Edgemode =
No extend)
Select objects: Clic (P1) 1 found Select objects: Enter /Project/Edge/Undo: Clic (P2) /Project/Edge/Undo: Enter
Command:
SELECCIN DE OBJETO
P2
P1
RESULTADO
EXTIENDE
SELECCIONA LMITE
14
STRETCH
Permite estirar objetos seleccionados, mediante una ventana de seleccin.
Secuencia:
Lnea de comandos: Ingresa el usuario: Command: S
Enter STRETCH Select objects to stretch by crossing-window or crossing-polygon...
Clic (P1)
Select objects:Other corner: Clic (P2) 1 found Select objects: Enter Base point or displacement: Clic (P3) Second point of displacement: Clic (P4)
Command:
SELECCIN DE OBJETO
SELECCIN DE OBJETO
FIGURA ESTIRADA
P1
P2
SELECCIN PUNTO DE REFERENCIA
(END) P3
15
BREAK
Corta parte de una entidad grfica seleccionando dos puntos de la misma.
Secuencia:
Lnea de comandos: Ingresa el usuario: Command: BR BREAK Select object: Clic (P1) Enter second point (or F for first point):: Clic (P2)
Command:
P2
DADO OBJETO
P1
P2 EPUNTOS DE CORTE
RESULTADO
16
MOVE
Permite mover objetos seleccionados desde un punto de referencia.
Secuencia:
Lnea de comandos: Ingresa el usuario: Command: M
Enter MOVE Select objects: Clic (P1) found Select objects: Enter Base point or displacement: Clic (P2) Second point of displacement: Clic (P3)
Command:
SELECCIN DE OBJETO
P1
RESULTADO
SELECCIN PUNTO
REFERENCIA (CEN) P2
P3
PUNTO DE TRASLADO
SELECCIN DE OBJETO
17
CHAMFER
Permite crear chaflanes o biselados en los objetos seleccionados.
Secuencia:
Lnea de comandos: Ingresa el usuario: Command: CHA
Enter CHAMFER (TRIM mode) Current chamfer Dist1 = 10.0000, Dist2 = 10.0000 Polyline/Distance/Angle/Trim/Method/: Clic (P1) elect second line: Clic (P2)
Command:
SELECCIN DE LADOS
DISTANCIA DE LOS BISELES
FIGURA CON BISEL
P1
P2
10
10
18
INGRESANDO UN VALOR DISTINTO AL PREDETERMINADO
Secuencia:
Lnea de comandos: Ingresa el usuario: Command: CHA
Enter CHAMFER (TRIM mode) Current chamfer Dist1 = 10.0000, Dist2 = 10.0000 Polyline/Distance/Angle/Trim/Method/: D
Enter Enter first chamfer distance : 15
Enter Enter second chamfer distance : 20
Enter Command: Enter CHAMFER (TRIM mode) Current chamfer Dist1 = 15.0000, Dist2 = 20.0000 Polyline/Distance/Angle/Trim/Method/: Clic (P1) Select second line: Clic (P2)
Command:
SELECCIN DE LADOS
DISTANCIA DE LOS BISELES
FIGURA CON BISEL
P1
P2
15
20
19
FILLET
Permite crear arcos en los objetos seleccionados.
Secuencia:
Lnea de comandos: Ingresa el usuario: Command: F
Enter FILLET (TRIM mode) Current fillet radius = 10.0 Polyline/Radius/Trim/: Clic (P1) Select second object: Clic (P2)
Command: Permite crear arcos en los objetos seleccionados, ingresando un radio:
SELECCIN DE LADOS
P1
P2
FIGURA CON RADIO
DISTANCIA DEL RADIO
10
20
Secuencia:
Lnea de comandos: Ingresa el usuario: Command: F
Enter FILLET (TRIM mode) Current fillet radius = 10.0 Polyline/Radius/Trim/: R Enter fillet radius : 15
Enter Command: Enter (TRIM mode) Current fillet radius = 15.0 Polyline/Radius/Trim/: Clic (P1) Select second object: Clic (P2)
Command:
SELECCIN DE LADOS
P1
P2
FIGURA CON RADIO
DISTANCIA DEL RADIO
15
21
MIRROR
Permite copiar objetos en el lado opuesto de acuerdo a un eje de simetra seleccionando, dando forma a un objeto simtrico.
Secuencia:
Lnea de comandos: Ingresa el usuario: Command: MI
Enter MIRROR Select objects: Clic (P1) Other corner: Clic (P2) 9 found Select objects: First point of mirror line: Clic (P3) Second point: Clic (P4) Delete old objects? Enter
Command:
SELECCIN DE OBJETO
SELECCIN DE OBJETOS
RESULTADO
P1
P2
P3 SELECCIN PUNTOS DE SIMETRA (END)
P4
22
ROTATE
Permite rotar, girar objetos de acuerdo a un punto de referencia seleccionado.
Secuencia:
Lnea de comandos: Ingresa el usuario: Command: RO
Enter ROTATE Select objects: Clic (P1) 1 found Select objects: Enter Base point: Clic (P2) /Reference: 15
Enter
Command:
SELECCIN DE OBJETO
P1 SELECCIN DE OBJETO
SELECCIN PUNTO
REFERENCIA (INT)
OBJETO ROTADO
15 GRADOS 15
P2
23
SCALE
Scale permite ampliar o reducir los objetos seleccionados, a partir de un punto base.
Secuencia: Lnea de comandos: Ingresa el usuario: Command: SC
Enter SCALE Select objects: Clic (P1) 1 found Select objects: Enter Base point: Clic (P2) /Reference: 2
Enter
Command:
Permite reducir objetos:
SELECCIN DE OBJETO
P1 SELECCIN DE
OBJETO
OBJETO AMPLIADO 2 VECES SU
TAMAO
SELECCIN PUNTO
REFERENCIA (INT) P2
24
Secuencia:
Lnea de comandos: Ingresa el usuario: Command: SC
Enter SCALE Select objects: Clic (P1) Found Select objects: Enter Base point: Clic (P2) /Reference: .5
Enter
Command:
P1 SELECCIN DE OBJETO
SELECCIN PUNTO
REFERENCIA (INT)
P2
OBJETO REDUCIDO
2 VECES SU TAMAO
25
ARRAY
Permite copiar objetos, en forma polar o rectangular.
Secuencia:
Lnea de comandos: Ingresa el usuario: Command: AR
Enter ARRAY Select objects: Clic (P1) 1 found Enter Select objects: Rectangular or Polar array (/P): P
Enter Base/: Clic (P2 CEN) Number of items: 4
Enter Angle to fill (+=ccw, -=cw) : Enter Rotate objects as they are copied? Enter
Command:
SELECCIN DEL OBJETO
OBJETO COPIADO
P1
P2
26
HERRAMIENTAS DE CAPTURA
OBJECT SNAP SETTINGS
Permite activar el letrero de dilogo osnap settings, que activa o desactiva los modos de captura. Estos modos atrapan los puntos geomtricos de las entidades grficas.
27
28
LOS LAYERS
LAYERS
Permite activar el letrero Laver Linetype Properties.
29
30
DIMENSIONAMIENTO
DIMENSION STYLE
Permite activar el letrero de dilogo Dimension Styles para seleccionar el estilo de acotado.
31
32