09/2021 - iss.rs
Transcript of 09/2021 - iss.rs
09/2021
2021
,
-
3
5
18
19
(CEN)
2021 21
2021 30
2021 39
(CENELEC)
2021 47
2021 53
2021 57
(ETSI)
62
(ISO)
2021 64
2021 74
(I C)
2021 86
2021 91
3
5
18
19
9/2021
4 www.iss.rs
1. Величине, јединице, симболи и сл.
SRPS EN ISO 80000-3:2021,
A :
ISO 80000-
2. КОЗМЕТИЧКО-ХЕМИЈСКИ ПРОИЗВОДИ
SRPS EN ISO 22716:2011,
A :
3. ХРАПАВОСТ ПОВРШИНА, ТОЛЕРАНЦИЈА МЕРА И ОБЛИКА
SRPS EN ISO 9222-1:2011,
A :
SRPS EN ISO 9222-2:2011,
A :
9/2021
www.iss.rs 5
. 3187/42-51-02/2021
30. .
I
o
:
1. ЗАШТИТА ОД ПОЖАРА
SRPS EN 54-1 (en),
SRPS EN 54-1:2012 (en),
2. ХЕМИКАЛИЈЕ ЗА ПРЕЧИШЋАВАЊЕ ВОДЕ
SRPS EN 1018 (en), -
SRPS EN 1018:2015 (en), -
3. ИСПИТИВАЊЕ ФИЗИЧКИХ СВОЈСТАВА ВОДЕ
SRPS EN ISO 13162 (en),
SRPS EN ISO 13162:2016 (en),
4. ХЕМИЈСКЕ КАРАКТЕРИСТИКЕ ЗЕМЉИШТА
SRPS EN ISO 12404 (en),
SRPS EN 16123:2014 (en),
SRPS EN ISO 12404:2016 (en),
5. ЗАШТИТА ЖИВОТНЕ СРЕДИНЕ
SRPS EN ISO 14031 (en),
9/2021
6 www.iss.rs
SRPS ISO 14031:2016 (sr),
6. ОПРЕМА ЗА ТРАНСФУЗИЈУ, ИНФУЗИЈУ И ИНЈЕКЦИЈСКА ОПРЕМА
SRPS EN ISO 22413 (en),
SRPS EN ISO 22413:2014 (en),
7. СИСТЕМИ ИСПИТИВАЊА ЗА ДИЈАГНОСТИКУ IN VITRO
SRPS EN ISO 17511 (en),
In vitro -
SRPS EN ISO 17511:2008 (en),
in vitro -
SRPS EN ISO 23118 (en),
in vitro -
SRPS CEN/TS 16945:2016 (en),
in vitro -
8. СТЕРИЛИЗАЦИЈА И ДЕЗИНФЕКЦИЈА УОПШТЕ
SRPS EN ISO 14160 (en),
--
SRPS EN ISO 14160:2012 (en),
--
9. БИОЛОШКО ВРЕДНОВАЊЕ МЕДИЦИНСКИХ СРЕДСТАВА
SRPS EN ISO 10993-12 (en),
-
SRPS EN ISO 10993-12:2014 (en),
12: -
10. ПОМОЋНА СРЕДСТВА И ПРИЛАГОЂАВАЊЕ КРЕТАЊУ
SRPS EN ISO 11199-1 (en),
SRPS EN ISO 11199-1:2008 (en),
9/2021
www.iss.rs 7
SRPS EN ISO 11199-2 (en),
SRPS EN ISO 11199-2:2008 (en),
11. СТОМАТОЛОШКA ОПРЕМА
SRPS EN ISO 3630-3 (en),
-
SRPS EN ISO 3630-3:2017 (en),
-
12. ЦЕВОВОДИ И ЕЛЕМЕНТИ ЦЕВОВОДА
SRPS EN 14917 (en),
SRPS EN 14917:2012 (en),
13. ИНСТАЛАЦИЈЕ У ЗГРАДАМА
SRPS EN 303-5 (en),
500 kW
SRPS EN 303-5:2016 (sr),
500 kW
14. ПОСУДЕ ЗА СКЛАДИШТЕЊЕ ФЛУИДА
SRPS EN ISO 14245 (en),
SRPS EN ISO 14245:2020 (en),
SRPS EN ISO 15995 (en),
SRPS EN ISO 15995:2020 (en),
15. ОПРЕМА ЗА РУКОВАЊЕ НАФТНИМ ПРОИЗВОДИМА И ПРИРОДНИМ ГАСОМ
SRPS EN 1473 (en),
SRPS EN 1473:2016 (en),
16. ЛИФТОВИ – ПОКРЕТНЕ СТЕПЕНИЦЕ
SRPS EN 81-22 (en),
9/2021
8 www.iss.rs
SRPS EN 81-22:2014 (en),
SRPS EN 81-70 (en),
SRPS EN 81-70:2018 (en),
SRPS EN 115-2 (en),
SRPS EN 115-2:2011 (en),
17. ВУЧЕНА ВОЗИЛА
SRPS EN 16116-2 (en),
SRPS EN 16116-2:2015 (en),
18. МИНЕРАЛНИ МАТЕРИЈАЛИ И ПРОИЗВОДИ
SRPS EN 16301 (en),
-
SRPS EN 16301:2014 (en),
-
19. ВРАТА И ПРОЗОРИ
SRPS EN 14500 (en),
SRPS EN 14500:2009 (en),
SRPS EN 14501 (en),
-
SRPS EN 14501:2008 (en),
-
20. МИКРОБИОЛОГИЈА ХРАНЕ
SRPS EN ISO 6888-1 (en),
- - Staphylococcus
aureus -
9/2021
www.iss.rs 9
SRPS EN ISO 6888-1:2009 (sr),
-
(Staphylococcus aureus --
SRPS EN ISO 6888-1:2009/ A2:2018 (en),
-
(Staphylococcus aureus -- -
SRPS EN ISO 6888-2 (en),
-- Staphylococcus
aureus
SRPS EN ISO 6888-2:2009 (sr),
-
(Staphylococcus aureus -
21. УЉА И МАСТИ БИЉНОГ И ЖИВОТИЊСКОГ ПОРЕКЛА
SRPS EN ISO 6321 (en),
SRPS EN ISO 6321:2009 (sr),
22. СЕНЗОРСКЕ АНАЛИЗЕ
SRPS EN ISO 4120 (en),
SRPS EN ISO 4120:2012 (sr),
SRPS EN ISO 4120:2012 (en),
23. КОРОЗИЈА МЕТАЛА
SRPS EN ISO 7539-9 (en),
SRPS EN ISO 7539-9:2012 (en),
24. НАФТНИ ПРОИЗВОДИ УОПШТЕ
SRPS EN 15199-4 (en),
SRPS EN 15199-4:2016 (en),
9/2021
10 www.iss.rs
25. ЧЕЛИЦИ
SRPS EN ISO 15349-2 (en),
SRPS EN ISO 15349-2:2012 (en),
26. ЧЕЛИЦИ ПОГОДНИ ЗА ТЕРМИЧКУ ОБРАДУ
SRPS EN ISO 683-5 (en),
SRPS EN 10085:2012 (en),
27. ЧЕЛИЦИ ЗА РАД ПОД ПРИТИСКОМ
SRPS EN 10222-2 (en),
SRPS EN 10222-2:2017 (en),
SRPS EN 10222-4 (en),
SRPS EN 10222-4:2017 (en),
28. НЕРЂАЈУЋИ ЧЕЛИЦИ
SRPS EN 10250-4 (en),
SRPS EN 10250-4:2012 (en),
SRPS EN 10253-2 (en),
SRPS EN 10253-2:2011 (en),
29. ОПРЕМА ЗА СКЛАДИШТЕЊЕ
SRPS EN 15620 (en),
SRPS EN 15620:2011 (en),
30. ПРОИЗВОДИ ОД АЛУМИНИЈУМА
SRPS EN 1706 (en),
9/2021
www.iss.rs 11
SRPS EN 1706:2020 (en),
SRPS EN 1706:2020 (sr),
31. ИСПИТИВАЊЕ БЕЗ РАЗАРАЊА
SRPS EN ISO 3452-1 (en),
SRPS EN ISO 3452-1:2014 (en),
SRPS EN ISO 3452-1:2014 (sr),
SRPS EN ISO 3452-2 (en),
SRPS EN ISO 3452-2:2014 (en),
SRPS EN ISO 3452-2:2014 (sr), 2:
32. ВАЗДУХОПЛОВСТВО
SRPS EN 2854-003 (en),
55 °C
SRPS EN 2854-003:2012 (en),
2
55 °C °C
SRPS EN 4700-002 (en),
SRPS EN 4700-002:2017 (en),
002:
33. МЕТАЛНИ ФИТИНЗИ
SRPS EN 1254-1 (en),
-
SRPS EN 1254-1:2009 (en),
-
SRPS EN 1254-2 (en),
SRPS EN 1254-2:2009 (en),
SRPS EN 1254-3 (en),
SRPS EN 1254-3:2009 (en),
9/2021
12 www.iss.rs
SRPS EN 1254-4 (en),
SRPS EN 1254-4:2009 (en),
SRPS EN 1254-5 (en),
SRPS EN 1254-5:2009 (en),
SRPS EN 1254-6 (en),
SRPS EN 1254-6:2014 (en),
SRPS EN 1254-8 (en),
SRPS EN 1254-8:2014 (en),
-
34. ПРОИЗВОДИ ОД БАКРА
SRPS EN 13601 (en),
SRPS EN 13601:2016 (sr),
SRPS EN 13605 (en),
SRPS EN 13605:2016 (sr),
35. МЕТАЛНЕ ПРЕВЛАКЕ
SRPS EN 13603 (en),
SRPS EN 13603:2014 (en),
9/2021
www.iss.rs 13
II
1. МРЕЖЕ ЗА ПРЕНОС И ДИСТРИБУЦИЈУ ЕЛЕКТРИЧНЕ ЕНЕРГИЈЕ
SRPS EN 50110-2 (en),
2. ЕНЕРГЕТСКИ КОНДЕНЗАТОРИ
SRPS EN IEC 63210 (en),
3. ЦЕВИ ЗА ЕЛЕКТРИЧНЕ СВРХЕ
SRPS EN 61534-1:2011/A2 (en),
SRPS EN 61534-1:2011/A11 (en), 11
SRPS EN IEC 61386-21 (en),
SRPS EN IEC 61386-21:2021/A11 (en),
SRPS EN IEC 61386-22 (en),
SRPS EN IEC 61386-22:2021/A11 (en), 2
SRPS EN IEC 61386-23 (en),
SRPS EN IEC 61386-23:2021/A11 (en), 3
4. НИСКОНАПОНСКЕ РАСКЛОПНЕ АПАРАТУРЕ
SRPS EN IEC 61439-1 (en),
SRPS EN IEC 61439-2 (en),
5. ОСИГУРАЧИ И ДРУГЕ НАПРАВЕ ЗА ЗАШТИТУ ОД ПРЕКОМЕРНЕ СТРУЈЕ
SRPS EN 60898-2 (en),
SRPS EN IEC 63052 (en),
SRPS HD 62640:2015/A12 (en), --
6. УРЕЂАЈИ ЗА СПАЈАЊЕ
SRPS EN 61995-1:2010/A11 (en),
9/2021
14 www.iss.rs
7. ОЦЕЊИВАЊЕ УСАГЛАШЕНОСТИ
SRPS EN ISO/IEC 17000 (sr, en),
8. ИСПИТИВАЊЕ ФИЗИЧКИХ СВОЈСТАВА ВОДЕ
SRPS EN ISO 22515 (en), -55
9. АКУСТИКА И АКУСТИЧКА МЕРЕЊА
SRPS ISO 20906 (sr),
10. СТЕРИЛИЗАЦИЈА И ДЕЗИНФЕКЦИЈА УОПШТЕ
SRPS EN ISO 11737-1:2018/A1 (en), -
11. ЗАШТИТНА ОПРЕМА ЗА ГЛАВУ
SRPS EN ISO 19734 (en),
12. СТОМАТОЛОШКИ ИНСТРУМЕНТИ
SRPS EN ISO 23445 (en),
SRPS EN ISO 23940 (en),
13. ЦЕВОВОДИ И ЕЛЕМЕНТИ ЦЕВОВОДА
SRPS EN 13480-3:2017/A1 (en), 1
SRPS CEN/TS 12007-6 (en),
--U)
14. ОПРЕМА ЗА РУКОВАЊЕ НАФТНИМ ПРОИЗВОДИМА И ПРИРОДНИМ ГАСОМ
SRPS EN ISO 20257-2 (en), -
15. КОТРЉАЈНИ ЛЕЖАЈИ
SRPS ISO 10317 (sr), -
16. ИНЖЕЊЕРСТВО ШИНСКОГ САОБРАЋАЈА УОПШТЕ
SRPS EN 17168 (en),
17. ОПРЕМА ЗА ГРАЂЕЊЕ
SRPS EN 12609 (en),
9/2021
www.iss.rs 15
18. МЛЕКО И ПРИЗВОДИ ОД МЛЕКА УОПШТЕ
SRPS CEN ISO/TS 23758 (en),
19. УЉА И МАСТИ БИЉНОГ И ЖИВОТИЊСКОГ ПОРЕКЛА
SRPS EN ISO 18363-4 (en), -
2-MCPD, 3- -MS/MS
20. ОСТАЛЕ МЕТОДЕ ИСПИТИВАЊА МЕТАЛА
SRPS EN ISO 642 (sr),
21. ПРОИЗВОДИ ОД АЛУМИНИЈУМА
SRPS EN 1676 (sr),
22. ИСПИТИВАЊЕ БЕЗ РАЗАРАЊА
SRPS EN 12679 (sr),
SRPS EN ISO 16526-1 (sr), -
SRPS EN ISO 16526-3 (sr), -
23. ЧЕЛИЦИ
SRPS EN 10373 (en),
24. ВАЗДУХОПЛОВСТВО
SRPS EN 4866 (en),
25. МЕТАЛНИ ФИТИНЗИ
SRPS EN 1254-7 (en), -
SRPS EN 1254-20 (en), -
9/2021
16 www.iss.rs
III
. 1. МЕХАНИЧКЕ КОНСТРУКЦИЈЕ ЗА ЕЛЕКТРОНСКУ ОПРЕМУ
SRPS HD 391 S3:2008 (en),
2. СИСТЕМИ НАПАЈАЊА ЕЛЕКТРИЧНОМ ЕНЕРГИЈОМ
SRPS HD 60364-7-722:2017 (sr), - -
3. КАБЛОВИ
SRPS EN 60332-3-10:2010 (en), -
SRPS EN 60332-3-21:2010 (en), -
SRPS EN 60332-3-22:2010 (en), -
SRPS EN 60332-3-23:2010 (en), -
SRPS EN 60332-3-24:2010 (en), -
SRPS EN 60332-3-25:2010 (en), -
4. ГОРИОНИЦИ – КОТЛОВИ
SRPS EN 12514-1:2011 (en),
SRPS EN 12514-2:2011 (en),
9/2021
www.iss.rs 17
5. ЦЕМЕНТ – ГИПС – КРЕЧ – МАЛТЕР
SRPS B.B6.011:1982 (sr),
6. МАШИНЕ ЗА ОБРАДУ ДРВЕТА
SRPS EN 1218-1:2011 (en),
SRPS EN 1218-2:2010 (en),
-
SRPS EN 1218-5:2010 (en),
9/2021
18 www.iss.rs
1. ГОРИОНИЦИ – КОТЛОВИ
SRPS EN 12514:2021/AC (en),
:
1. ОСИГУРАЧИ И ДРУГЕ НАПРАВЕ ЗА ЗАШТИТУ ОД ПРЕКОМЕРНЕ СТРУЈЕ
SRPS EN 50550:2011/ AC:2012 (en),
2. НИСКОНАПОНСКЕ РАСКЛОПНЕ АПАРАТУРЕ
SRPS EN 61439-1:2018/ Ispr. 1:2019 (sr),
9/2021
www.iss.rs 19
СРПСКИ СТАНДАРДИ КОЈИ ЋЕ СЕ ПОВУЋИ
KS U189,
1. SRPS B.D8.070:2016 (sr),
2. SRPS B.D8.080:2016 (sr),
(CEN)
2021 21
2021 30
2021 39
(CENELEC)
2021 47
2021 53
2021 57
(ETSI)
62
9/2021
www.iss.rs 21
(CEN)
2021
:
2021
1. CEN/CLC/JTC 5 – Space
prCEN/TR 17603-32-21 Space engineering Adhesive bonding handbook 2021-09-08
prCEN/TR 17603-32-22 Space engineering Insert design handbook 2021-09-08
prCEN/TR 17603-32-23 Space engineering Threaded fasteners handbook 2021-09-08
prCEN/TR 17603-32-24 Space engineering Buckling of structures 2021-09-08
prCEN/TR 17603-32-25 Space engineering Mechanical shock design and verification handbook
2021-09-08
prCEN/TR 17603-32-26 Space engineering Spacecraft mechanical loads analysis handbook
2021-09-08
prCEN/TR 17603-40 Space engineering Software engineering handbook 2021-09-08
prCEN/TR 17603-40-01 Space engineering Agile software development handbook
2021-09-08
prCEN/TR 17603-50 Space engineering Communication guidelines 2021-09-08
2. CEN/CLC/JTC 13 – Cybersecurity and Data Protection
WI JT013043 (WI=JT013043)
Multi-layered approach for a set of requirements for information/cyber security controls for Cloud Services
2021-09-08
WI JT013044 (WI=JT013044)
Requirements for Conformity Assessment Bodies certifying Cloud Services
2021-09-08
3. CEN/SS F05 – Measuring Instruments
prEN ISO 5167-5 rev Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 5: Cone meters
2021-09-09
9/2021
22 www.iss.rs
2021
prEN ISO 5167-6 rev Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 6: Wedge meters
2021-09-09
4. CEN/TC 19 – Gaseous and liquid fuels, lubricants and related products of petroleum, synthetic and biological origin
prEN 16709 rev Automotive fuels High FAME diesel fuel (B20 and B30) Requirements and test methods
2021-09-09
5. CEN/TC 33 – Doors, windows, shutters, building hardware and curtain walling
EN 1527:2019 + A1:2021 Building hardware Hardware for sliding doors and folding doors Requirements and test methods
2021-09-23
6. CEN/TC 55 – Dentistry
prEN ISO 7405 rev Dentistry Evaluation of biocompatibility of medical devices used in dentistry
2021-09-07
prEN ISO 18397 rev Dentistry Powered scaler 2021-09-07
prEN ISO 20749 rev Dentistry Pre-capsulated dental amalgam 2021-09-15
prEN ISO 20896-1 rev Dentistry Digital impression devices Part 1: Methods for assessing accuracy
2021-09-07
7. CEN/TC 89 – Thermal performance of buildings and building components
prEN ISO 9288 rev Thermal insulation Heat transfer by radiation Physical quantities and definitions
2021-09-22
8. CEN/TC 92 – Water meters
prEN ISO 4064-1 rev Water meters for cold potable water and hot water Part 1: Metrological and technical requirements (ISO 4064-1:2014)
2021-09-02
prEN ISO 4064-2 rev Water meters for cold potable water and hot water Part 2: Test methods (ISO 4064-2:2014)
2021-09-03
9. CEN/TC 107 – Prefabricated district heating and district cooling pipe system
EN 13941-1:2019 + A1:2021 District heating pipes Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks Part 1: Design
2021-09-21
9/2021
www.iss.rs 23
2021
EN 13941-2:2019 + A1:2021 District heating pipes Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks Part 2: Installation
2021-09-21
10. CEN/TC 121 – Welding and allied processes
prEN ISO 12224-1 rev Solder wire, solid and flux cored Specification and test methods Part 1: Classification and perfor-mance requirements
2021-09-16
prEN ISO 12224-2 rev Flux cored solder wire Specification and test methods Part 2: Determination of flux content
2021-09-16
11. CEN/TC 122 – Ergonomics
prCEN ISO/IEC TR 25060 rev Systems and software engineering Systems and software product Quality Requirements and Eva-luation (SQuaRE) Common Industry Format (CIF) for usability: General framework for usability- -related information
2021-09-22
12. CEN/TC 127 – Fire safety in buildings
prEN 1366-8 rev Fire resistance tests for service installations Part 8: Smoke extraction ducts
2021-09-20
prEN 1366-9 rev Fire resistance tests for service installations Part 9: Single compartment smoke extraction ducts
2021-09-20
prEN 15269-2 rev Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware Part 2: Fire resistance of hinged and pivoted steel doorsets
2021-09-21
13. CEN/TC 133 – Copper and copper alloys
prEN 12163 rev Copper and copper alloys Rod for general purposes 2021-09-06
prEN 12164 rev Copper and copper alloys Rod for free machining purposes
2021-09-06
prEN 12165 rev Copper and copper alloys Wrought and unwrought forging stock
2021-09-06
prEN 12166 rev Copper and copper alloys Wire for general purposes 2021-09-06
prEN 12167 rev Copper and copper alloys Profiles and bars for general purposes
2021-09-06
prEN 12168 rev Copper and copper alloys Hollow rod for free machining purposes
2021-09-06
prEN 12420 rev Copper and copper alloys Forgings 2021-09-06
9/2021
24 www.iss.rs
2021
14. CEN/TC 134 – Resilient, textile and laminate
floor coverings
EN ISO 26986:2012/prA1 Resilient floor coverings Expanded (cushioned) poly(vinyl chloride) floor covering Specification (ISO 26986:2010)
2021-09-14
15. CEN/TC 136 – Sports, playground and
other recreational facilities and equipment
EN 1177:2018 + AC:2019/ prA1
Impact attenuating playground surfacing Methods of test for determination of impact attenuation
2021-09-17
prEN 16474 rev Plastics and rubber machines Tyre curing machines Safety requirements
2021-09-20
16. CEN/TC 145 – Plastics and rubber machines
WI 162468 (WI=162468)
Protective clothing against solid airborne particles including radioactive contamination Part 3: Requ-irements and test methods for chemical protective suit combined with powered filtering devices, pro-tecting the body and the respiratory tract
2021-09-23
prCEN ISO/TR 8546 Hand protection Guide for Selection and use 2021-09-22
prEN ISO 22615 Protective clothing Performance requirements and test methods for protective clothing against infective agents
2021-09-22
17. CEN/TC 164 – Water supply
prEN 973 rev Chemicals used for treatment of water intended for human consumption Sodium chloride for regeneration of ion exchangers
2021-09-01
prEN 1302 rev Chemicals used for treatment of water intended for human consumption Aluminium-based coagulants
Analytical methods
2021-09-01
prEN 1405 rev Chemicals used for treatment of water intended for human consumption Sodium alginate
2021-09-01
prEN 1407 rev Chemicals used for treatment of water intended for human consumption Anionic and non-ionic polyacrylamides
2021-09-01
prEN 1408 rev Chemicals used for treatment of water intended for human consumption Poly (diallyldimethyl-ammonium chloride)
2021-09-01
prEN 1409 rev Chemicals used for water treatment intended for human consumption Polyamines
2021-09-01
9/2021
www.iss.rs 25
2021
prEN 1410 rev Chemicals used for treatment of water intended for human consumption Cationic polyacrylamides
2021-09-01
prEN 12122 rev Chemicals used for treatment of water intended for human consumption Ammonia solution
2021-09-01
18. CEN/TC 170 – Ophthalmic optics
prEN ISO 10943 rev Ophthalmic instruments Indirect ophthalmoscopes 2021-09-22
19. CEN/TC 185 – Fasteners
prEN ISO 3506-6 Fasteners Mechanical properties of corrosion-resistant stainless steel fasteners Part 6: General rules for the selection of stainless steels and nickel alloys for fasteners
2021-09-21
20. CEN/TC 205 – Non-active medical devices
prEN ISO 24072 Aerosol bacterial retention test method for air-inlet on administration devices
2021-09-20
21. CEN/TC 211 – Acoustics
prEN ISO 17201-6 Acoustics Noise from shooting ranges Part 6: Sound pressure measurements close to the source for determining exposure to sound
2021-09-17
prEN ISO 26101-1 Acoustics Test methods for the qualification of the acoustic environment Part 1: Qualification of free-field environments
2021-09-09
prEN ISO 26101-2 Acoustics Test methods for the qualification of the acoustic environment Part 2: Determination of the environmental correction
2021-09-22
22. CEN/TC 216 – Chemical disinfectants and antiseptics
WI 216139 (WI=216139)
English title: Chemical disinfectants and antiseptics Quantitative test method for the evaluation of
sporicidal activity against Clostridioides difficile on non-porous surfaces with mechanical action employing wipes in the medical area (4- field test) Test method and requirements (phase 2, step 2)
2021-09-07
WI 216140 (WI 216140)
Chemical disinfectants and antiseptics Interpre-tation of water controls in EN 16615: 2015
2021-09-09
23. CEN/TC 230 – Water analysis
prEN ISO 9308-2 rev Water quality Enumeration of Escherichia coli and coliform bacteria Part 2: Most probable number method
2021-09-22
9/2021
26 www.iss.rs
2021
24. CEN/TC 235 – Gas pressure regulators and associated safety devices for use in gas transmission and distribution
EN 334:2019/prA1 Gas pressure regulators for inlet pressure up to 10 MPa (100 bar)
2021-09-13
25. CEN/TC 238 – Test gases, test pressures, appliance categories and gas appliance types
prCEN/TR 1404 Determination of emissions from appliances burning gaseous fuel during tape-testing
2021-09-17
prCEN/TR 1472 General guidance for the marking of gas appliances 2021-09-20
26. CEN/TC 243 – Cleanroom technology
prEN ISO 14644-5 rev Cleanrooms and associated controlled environments Part 5: Operations (ISO 14644-5:2004)
2021-09-06
27. CEN/TC 248 – Textiles and textile products
prEN 14682 rev Safety of children's clothing Cords and drawstrings on children's clothing Specifications
2021-09-09
28. CEN/TC 249 – Plastics
WI 00249A0K (WI=00249A0K)
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors Classifica-tion, requirements and test methods Part 2: PVC-U profiles covered with foils bonded with adhesives
2021-09-20
29. CEN/TC 250 – Structural Eurocodes
WI 250223 (WI=250223)
EN 1993-3 Eurocode 3 Design of steel structures Part 3: Towers, masts and chimneys
2021-09-14
prEN 1993-1-6 rev Eurocode 3 Design of steel structures Part 1-6: Strength and Stability of Shell Structures
2021-09-14
prEN 1993-1-7 rev Eurocode 3 Design of steel structures Part 1-7: Plated structures subject to out of plane loading
2021-09-14
prEN 1993-4-1 rev Eurocode 3 Design of steel structures Part 4-1: Silos
2021-09-14
prEN 1993-4-2 rev Eurocode 3 Design of steel structures Part 4-2: Tanks
2021-09-14
prEN 1993-5 rev Eurocode 3 Design of steel structures Part 5: Piling
2021-09-14
prEN 1993-6 rev Eurocode 3 Design of steel structures Part 6: Crane supporting structures
2021-09-14
9/2021
www.iss.rs 27
2021
30. CEN/TC 262 – Metallic and other inorganic coatings, including for corrosion protection and corrosion testing of metals and alloys
prEN ISO 9717 rev Metallic and other inorganic coatings Phosphate conversion coating of metals
2021-09-13
31. CEN/TC 264 – Air quality
prEN 14211 rev Ambient air Standard method for the measu-rement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence
2021-09-06
prEN 14212 rev Ambient air Standard method for the measu-rement of the concentration of sulphur dioxide by ultraviolet fluorescence
2021-09-06
prEN 14625 rev Ambient air Standard method for the measu-rement of the concentration of ozone by ultraviolet photometry
2021-09-06
prEN 14626 rev Ambient air Standard method for the measu-rement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
2021-09-06
prEN 14662-1 rev Ambient air Standard method for the measu-rement of benzene concentrations Part 1: Pumped sampling followed by thermal desorption and gas chromatography
2021-09-06
32. CEN/TC 285 – Non-active surgical implants
prEN ISO 7197 rev Neurosurgical implants Sterile, single-use hydro-cephalus shunts and components
2021-09-15
33. CEN/TC 287 – Geographic Information
prEN ISO 19144-2 Geographic information Classification systems Part 2: Land Cover Meta Language (LCML)
2021-09-14
34. CEN/TC 298 – Pigments and extenders
prEN ISO 23157 Determination of the silanol group content on the surface of fumed silica Reaction gas chromato-graphic method
2021-09-20
35. CEN/TC 305 – Potentially explosive atmos-pheres – Explosion prevention and protection
WI 305158 (WI=305158)
Screw conveyors explosion isolation systems 2021-09-08
prCEN/TR 15281 rev Guidance on Inerting for the Prevention of Explosions 2021-09-08
prEN 14986 rev Design of fans working in potentially explosive atmospheres
2021-09-13
9/2021
28 www.iss.rs
2021
36. CEN/TC 307 – Oilseeds, vegetable and animal fats and oils and their by-products – Methods of sampling and analysis
prEN ISO 12872 rev Olive oils and olive-pomace oils Determination of the 2-glyceryl monopalmitate content
2021-09-22
37. CEN/TC 331 – Postal services
prEN 14534 rev Postal services Quality of service Measurement of the transit time of end-to-end services for bulk mail
2021-09-21
38. CEN/TC 346 – Conservation of Cultural Heritage
WI 346056 (WI=346056)
Conservation of cultural heritage Desalination of porous inorganic materials by poultices
2021-09-21
39. CEN/TC 351 – Construction Products – Ass-essment of release of dangerous substances
WI 351056 (WI=351056)
Construction products: Assessment of release of dangerous substances Pros and cons of methods for communicating the potential release of dangerous substances into soil, groundwater or surface water and indoor air
2021-09-01
40. CEN/TC 392 – Cosmetics
EN ISO 11930:2019/prA1 Cosmetics Microbiology Evaluation of the antimicrobial protection of a cosmetic product Amendment 1
2021-09-15
EN ISO 16212:2017/prA1 Cosmetics Microbiology Enumeration of yeast and mould Amendment 1
2021-09-15
EN ISO 18415:2017/prA1 Cosmetics Microbiology Detection of specified and non-specified microorganisms Amendment 1
2021-09-15
EN ISO 18416:2015/prA1 Cosmetics Microbiology Detection of Candida albicans Amendment 1
2021-09-15
EN ISO 21149:2017/prA1 Cosmetics Microbiology Enumeration and detec-tion of aerobic mesophilic bacteria Amendment 1
2021-09-15
EN ISO 21150:2015/prA1 Cosmetics Microbiology Detection of Escherichia coli Amendment 1
2021-09-15
EN ISO 22717:2015/prA1 Cosmetics Microbiology Detection of Pseudo-monas aeruginosa Amendment 1
2021-09-15
EN ISO 22718:2015/prA1 Cosmetics Microbiology Detection of Staphylo-coccus aureus mendment 1
2021-09-15
9/2021
www.iss.rs 29
2021
41. CEN/TC 430 – Nuclear energy, nuclear
technologies, and radiological protection
prEN ISO 20785-3 rev Dosimetry for exposures to cosmic radiation in civilian aircraft Part 3: Measurements at aviation altitudes
2021-09-22
42. CEN/TC 438 – Additive Manufacturing
prCEN ISO/ASTM TR 52913-1 Additive manufacturing Feedstock materials Part 1: Parameters for characterization of powder flow properties
2021-09-20
prEN ISO/ASTM 52945 Additive manufacturing for Automotive Qualifi-cation principles Generic machine evaluation and specification of Key Performance Indicators for PBF-LB/M processes
2021-09-21
43. CEN/TC 444 – Test methods for environ-
mental characterization of solid matrices
prEN ISO 22036 Sludge, treated biowaste and soil Determination of elements using inductively coupled plasma optical emission spectrometry (ICP-OES)
2021-09-26
44. CEN/TC 459/SC 1 – Test methods for steel
(other than chemical analysis)
prEN ISO 148-1 rev Metallic materials Charpy pendulum impact test Part 1: Test method
2021-09-22
prEN ISO 148-2 rev Metallic materials Charpy pendulum impact test Part 2: Verification of testing machines
2021-09-22
prEN ISO 148-3 rev Metallic materials Charpy pendulum impact test Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
2021-09-22
45. CEN/TC 459/SC 10 – Steel tubes, and iron
and steel fittings
prEN 10284 rev Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems
2021-09-22
46. CEN/TC 464 – Small Craft
EN ISO 15083:2020/prA1 Small craft Bilge-pumping systems Amendment 1 2021-09-15
9/2021
30 www.iss.rs
2021
www.iss.rs,
1. ASD-STAN – Aerospace
prEN 3361 Aerospace series Steel X5CrNiCu15 5 (1.4545) Con-sumable electrode remelted Solution treated and precipitation treated Sheets and strips a ≤ 6mm
1 070 MPa ≤ Rm ≤ 1 220 MPa
2021-09-16
prEN 3364 Aerospace series Steel X5CrNiCu15 5 (1.4545) Consumable electrode remelted, softened Forging stocks a or D ≤ 300 mm
2021-09-16
prEN 3479 Aerospace series Steel X5CrNiCu15 5 (1.4545) Consumable electrode remelted Solution treated and precipitation treated Plates 6 mm < a ≤ 20 mm 1 070 MPa ≤ Rm ≤ 1 220 MPa
2021-09-16
prEN 4258 Aerospace series Metallic materials General organization of standardization Link between types of European Standards and their use
2021-09-16
prEN 4287 Aerospace series Aluminium alloy AL-P7010 Forging stock
2021-09-16
prEN 4902 Aerospace series Surface treatments Definitions and test methods
2021-09-16
prEN 4904 Aerospace series Steel 36NiCrMo16 1 000 MPa ≤ Rm ≤ 1 200 MPa Bars 100 ≤ D ≤ 250 mm
2021-09-16
2. CEN/CLC/JTC 13 – Cybersecurity and Data Protection
prEN ISO 27007 Information security, cybersecurity and privacy pro-tection Guidelines for information security mana-gement systems auditing (ISO/IEC 27007:2020)
2021-09-02
9/2021
www.iss.rs 31
3. CEN/SS S26 – Environmental management
prEN ISO 14015 Environmental management Guidelines for Environmental Due Diligence Assessment (ISO/DIS 14015:2021)
2021-09-09
4. CEN/TC 10 – Lifts, escalators and moving walks
prEN 81-43 Safety rules for the construction and installation of lifts Special lifts for the transport of persons and goods Part 43: Lifts for cranes
2021-09-09
5. CEN/TC 23 – Transportable gas cylinders
prEN 13322-1 Transportable gas cylinders Refillable welded steel gas cylinders Design and construction Part 1: Carbon steel
2021-09-23
6. CEN/TC 33 – Doors, windows, shutters, building hardware and curtain walling
prEN 14024 Metal profiles with thermal barrier Mechanical performance Requirements, proof and tests for assessment
2021-09-16
7. CEN/TC 38 – Durability of wood and wood-based products
prEN 113-3 Durability of wood and wood-based products Test method against wood destroying basidiomycetes Part 3: assessment of durability of wood-based panels
2021-09-09
8. CEN/TC 49 – Gas cooking appliances
prEN 30-1-2 Domestic cooking appliances burning gas Safety Part 1-2: Appliances having forced-convection ovens
2021-09-09
9. CEN/TC 58 – Safety and control devices for burners and appliances burning gaseous or liquid fuels
EN 13611:2019/prA1 Safety and control devices for burners and appli-ances burning gaseous and/or liquid fuels General requirements
2021-09-23
10. CEN/TC 69 – Industrial valves
prEN 15714-3 Industrial valves Actuators Part 3: Pneumatic part-turn actuators for industrial valves Basic requirements
2021-09-23
9/2021
32 www.iss.rs
prEN 15714-6 Industrial valves Actuators Part 6: Hydraulic linear actuators for industrial valves Basic requirements
2021-09-23
11. CEN/TC 121 – Welding and allied processes
prEN ISO 15614-4 Specification and qualification of welding procedures for metallic materials Welding procedure test Part 4: Finishing welding of aluminium castings (ISO/DIS 15614-4:2021)
2021-09-09
prEN ISO 15614-6 Specification and qualification of welding procedures for metallic materials Welding procedure test Part 6: Arc and gas welding of copper and its alloys (ISO/DIS 15614-6:2021)
2021-09-09
12. CEN/TC 138 – Non-destructive testing
prEN ISO 18563-1 Non-destructive testing Characterization and veri-fication of ultrasonic phased array equipment Part 1: Instruments (ISO/DIS 18563-1:2021)
2021-09-02
13. CEN/TC 139 – Paints and varnishes
prEN 927-2 Paints and varnishes Coating materials and coating systems for exterior wood Part 2: Performance specification
2021-09-02
14. CEN/TC 144 – Tractors and machinery for agriculture and forestry
EN ISO 28139:2021/prA1 Equipment for crop protection Knapsack combus-tion engine-driven airblast sprayers Safety and environmental requirements and test methods Amendment 1 (ISO 28139:2019/DAM 1:2021)
2021-09-16
15. CEN/TC 160 – Protection against falls from height including working belts
prEN 353-2 Personal fall protection equipment Part 2: Guided type fall arresters including a flexible anchor line
2021-09-23
prEN 813 Personal fall protection equipment Sit harnesses 2021-09-23
16. CEN/TC 164 – Water supply
prEN 14944-1 Influence of cementitious products on water intended for human consumption Test methods Part 1: Influence of factory made cementitious products on organoleptic parameters
2021-09-02
9/2021
www.iss.rs 33
prEN 14944-3 Influence of cementitious products on water intended for human consumption Test methods Part 3: Migration of substances from factory-made cement-ititous products
2021-09-02
17. CEN/TC 166 – Chimneys
prEN 15287-1 Chimneys Design, installation and commissioning Part 1: Chimneys and connecting flue pipes for
non-room sealed combustion appliances
2021-09-16
prEN 15287-2 Chimneys Design, installation and commissioning Part 2: Chimneys and connecting flue pipes for
room sealed combustion appliances
2021-09-16
18. CEN/TC 172 – Pulp, paper and board
prEN ISO 5263-3 Pulps Laboratory wet disintegration Part 3: Disintegration of mechanical pulps at > 85°C (ISO/DIS 5263-3:2021)
2021-09-09
prEN ISO 5270 Pulps Laboratory sheets Determination of physical properties (ISO/DIS 5270:2021)
2021-09-16
19. CEN/TC 185 – Fasteners
prEN ISO 898-2 Fasteners Mechanical properties of fasteners made of carbon steel and alloy steel Part 2: Nuts with specified property classes (ISO/DIS 898-2:2021)
2021-09-02
20. CEN/TC 189 – Geosynthetics
prEN 16416 Geosynthetic clay barriers Determination of water flux index Flexible wall permeameter method at constant head
2021-09-23
prEN 17738 Geotextiles and Geotextile related products Damage during installation procedure Full scale test
2021-09-23
21. CEN/TC 193 – Adhesives
prEN 302-1 Adhesives for load-bearing timber structures Test methods Part 1: Determination of longitudinal tensile shear strength
2021-09-09
prEN 302-2 Adhesives for load-bearing timber structures Test methods Part 2: Determination of resistance to delamination
2021-09-09
prEN 302-4 Adhesives for load-bearing timber structures Test methods Part 4: Determination of the effects of wood shrinkage on the shear strength
2021-09-09
9/2021
34 www.iss.rs
prEN 302-5 Adhesives for load-bearing timber structures Test methods Part 5: Determination of maximum assembly time under referenced conditions
2021-09-09
prEN 302-6 Adhesives for load-bearing timber structures Test methods Part 6: Determination of the minimum pressing time under referenced conditions
2021-09-09
prEN 302-7 Adhesives for load-bearing timber structures Test methods Part 7: Determination of the working life under referenced conditions
2021-09-09
22. CEN/TC 207 – Furniture
EN 1335-1:2020/prA1 Office furniture Office work chair Part 1: Dimensions Determination of dimensions
2021-09-09
prEN 15372 Furniture Strength, durability and safety Requi-rements for non-domestic tables
2021-09-09
prEN 17737 Hardware for furniture Test and evaluation methods for the corrosion resistance of furniture fittings
2021-09-23
23. CEN/TC 217 – Surfaces for sports areas
prEN 12230 Surfaces for sports areas Test method for the determination of tensile properties of synthetic sports surfaces
2021-09-02
24. CEN/TC 226 – Road equipment
prEN 1463-3 Road marking materials Part 3: Active road studs: performance requirements
2021-09-09
25. CEN/TC 248 – Textiles and textile products
prEN 1875-3 Rubber- or plastics- coated fabrics Determination of tear strength Part 3: Trapezoidal method
2021-09-23
26. CEN/TC 250 – Structural Eurocodes
prEN 1990 Eurocode Basis of structural and geotechnical design 2021-09-02
prEN 1991-1-2 Eurocode 1: Actions on structures Part 1-2: General actions Actions on structures exposed to fire
2021-09-02
prEN 1991-2 Eurocode 1 Actions on structures Part 2: Traffic loads on bridges and other civil engineering works
2021-09-02
prEN 1992-1-1 Eurocode 2: Design of concrete structures Part 1-1: General rules Rules for buildings, bridges and civil engineering structures
2021-09-02
9/2021
www.iss.rs 35
prEN 1992-1-2 Eurocode 2: Design of concrete structures Part 1-2: General rules Structural fire design
2021-09-02
prEN 1996-3 Eurocode 6 Design of Masonry structures Part 3: Simplified calculation methods for unreinforced masonry structures
2021-09-02
27. CEN/TC 251 – Health informatics
prEN ISO/IEEE 11073-40101 Health informatics Device interoperability Part 40101: Foundational Cybersecurity Processes for vulnerability assessment (ISO/IEEE FDIS 11073-40101:2021)
2021-09-16
prEN ISO/IEEE 11073-40102 Health informatics Device interoperability Part 40102: Foundational Cybersecurity Capabilities for mitigation (ISO/IEEE FDIS 11073-40102:2021)
2021-09-16
28. CEN/TC 252 – Child use and care articles
EN 1888-2:2018/prA1 Child care articles Wheeled child conveyances Part 2: Pushchairs for children above 15 kg up to 22 kg
2021-09-16
29. CEN/TC 256 – Railway applications
EN 15355:2019/prA1 Railway applications Braking Distributor valves and distributor-isolating devices
2021-09-02
30. CEN/TC 261 – Packaging
prEN 13045 Packaging Flexible cylindrical plastic tubes Dimensions and tolerances
2021-09-23
prEN 16565 Packaging Flexible tubes Test method to determine the orientation of the flip-top cap
2021-09-02
prEN ISO 15750-3 Packaging Steel drums Part 3: Inserted flange -type closure systems (ISO/DIS 15750-3:2021)
2021-09-16
31. CEN/TC 268 – Cryogenic vessels and specific hydrogen technologies applications
prEN ISO 21012 Cryogenic vessels Hoses (ISO/DIS 21012:2021) 2021-09-16
32. CEN/TC 289 – Leather
prEN ISO 17072-2 Leather Chemical determination of metal content Part 2: Total metal content (ISO/DIS 17072-2:2021)
2021-09-16
prEN ISO 18218-1 Leather Determination of ethoxylated alkylphenols Part 1: Direct method (ISO/DIS 18218-1:2021)
2021-09-23
9/2021
36 www.iss.rs
prEN ISO 23702-1 Leather Per- and polyfluoroalkyl substances Part 1: Determination of non-volatile compounds by extraction method using liquid chromatography (ISO/DIS 23702-1:2021)
2021-09-23
33. CEN/TC 305 – Potentially explosive atmospheres – Explosion prevention and protection
prEN 14983 Explosion prevention and protection in underground mines Equipment and protective systems for firedamp drainage
2021-09-23
34. CEN/TC 318 – Hydrometry
prEN 17694-1 Hydrometry Performance requirements and test procedures for water monitoring equipment Devices for the determination of flow Part 1: Open channel instrumentation
2021-09-02
prEN 17694-2 Hydrometry Performance requirements and test procedures for water monitoring equipment Devices for the determination of flow Part 2: Closed conduit instrumentation
2021-09-23
35. CEN/TC 341 – Geotechnical Investigation and Testing
EN ISO 17892-12:2018/prA2 Geotechnical investigation and testing Laboratory testing of soil Part 12: Determination of liquid and plastic limits Amendment 2 (ISO 17892-12:2018/ DAM 2:2021)
2021-09-16
36. CEN/TC 348 – Facility Management
prEN ISO 41018 Facility management Development of a facility management policy (ISO/DIS 41018:2021)
2021-09-16
37. CEN/TC 350 – Sustainability of construction works
prEN 15978-1 Sustainability of construction works Methodology for the assessment of performance of buildings Part 1: Environmental Performance
2021-09-09
38. CEN/TC 352 – Nanotechnologies
prEN ISO 21363 Nanotechnologies Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020)
2021-09-02
9/2021
www.iss.rs 37
prEN ISO 80004-1 Nanotechnologies Vocabulary Part 1: Core terms and definitions (ISO/DIS 80004-1:2021)
2021-09-16
39. CEN/TC 429 – Food hygiene – Commercial
warewashing machines – Hygiene requi-
rements and testing
prEN 17735 Commercial dishwashing machines Hygiene requi-rement and testing
2021-09-16
40. CEN/TC 433 – Entertainment Technology –
Machinery, equipment and installations
prEN 17736 Entertainment technology Specifications for design and manufacture of aluminium stage decks and frames
2021-09-09
41. CEN/TC 437 – Electronic cigarettes and
e-liquids
prEN ISO 24211 Vapour products Determination of selected carbonyls in vapour product emissions (ISO/DIS 24211:2021)
2021-09-23
42. CEN/TC 438 – Additive Manufacturing
prEN ISO/ASTM 52931 Additive manufacturing of metals Environment, health and safety General principles for use of metallic materials (ISO/ASTM DIS 52931:2021)
2021-09-09
43. CEN/TC 442 – Building Information
Modelling (BIM)
prEN ISO 29481-3 Building information models Information delivery manual Part 3: Data schema and code (ISO/DIS 29481-3:2021)
2021-09-02
44. CEN/TC 463 – Microbiology of the food
chain
prEN ISO 15213-1 Microbiology of the food chain Horizontal method for the detection and enumeration of Clostridium spp. Part 1: Enumeration of sulfite-reducing Clostridium spp. by colony-count technique (ISO/DIS 15213-1:2021)
2021-09-16
9/2021
38 www.iss.rs
prEN ISO 20976-2 Microbiology of the food chain Requirements and guidelines for conducting challenge tests of food and feed products Part 2: Challenge tests to study inactivation potential and kinetic parameters (ISO/DIS 20976-2:2021)
2021-09-16
45. CEN/TC 464 – Small Craft
prEN ISO 10087 Small craft Craft identification Coding system (ISO/FDIS 10087:2021)
2021-09-02
9/2021
www.iss.rs 39
2021
date of availability).
2021
DAV
1. CEN/CLC/JTC 1 – Criteria for conformity
assessment bodies
EN ISO/IEC 17030:2021 Conformity assessment General requirements for third-party marks of conformity (ISO/IEC 17030:2021)
2021-09-22
2. CEN/CLC/JTC 3 – Quality management
and corresponding general aspects
for medical devices
EN ISO 13485:2016/A11:2021 Medical devices Quality management systems Requirements for regulatory purposes (ISO 13485:2016)
2021-09-08
3. CEN/CLC/JTC 4 – Services for fire safety
and security systems
EN 50710:2021 Requirements for the provision of secure remote services for fire safety systems and security systems
2021-09-24
4. CEN/CLC/JTC 5 – Space
EN 16602-70-15:2021 Space product assurance Non-destructive testing 2021-09-01
EN 16603-10-04:2021 Space engineering Space environment 2021-09-01
5. CEN/SS C01 – Food Products
EN ISO 11132:2021 Sensory analysis Methodology Guidelines for the measurement of the performance of a quantitative descriptive sensory panel (ISO 11132:2021)
2021-09-22
9/2021
40 www.iss.rs
2021
DAV
6. CEN/TC 10 – Lifts, escalators and moving walks
EN 81-22:2021 Safety rules for the construction and installation of lifts Lifts for the transport of persons and goods Part 22: Passenger and goods passenger lifts with inclined travel path
2021-09-01
7. CEN/TC 12 – Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
CEN ISO/TR 10400:2021 Petroleum and natural gas industries Formulae and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing (ISO/TR 10400:2018)
2021-09-22
8. CEN/TC 15 – Inland navigation vessels
EN 17556:2021 Inland navigation vessels Safety rota and safety plans for passenger vessels
2021-09-15
9. CEN/TC 19 – Gaseous and liquid fuels, lubricants and related products of petroleum, synthetic and biological origin.
EN 15199-4:2021 Petroleum products Determination of boiling range distribution by gas chromatography method Part 4: Light fractions of crude oil
2021-09-01
10. CEN/TC 55 – Dentistry
EN ISO 6877:2021 Dentistry Endodontic obturating materials (ISO 6877:2021)
2021-09-22
EN ISO 21563:2021 Dentistry Hydrocolloid impression materials (ISO 21563:2021)
2021-09-15
11. CEN/TC 58 – Safety and control devices for burners and appliances burning gaseous or liquid fuels
EN 13611:2019/AC:2021 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels General requirements
2021-09-01
12. CEN/TC 107 – Prefabricated district heating and district cooling pipe system
EN 17415-2:2021 District cooling pipes Bonded single pipe systems for directly buried cold water networks Part 2: Factory made fitting assemblies of steel or plastic service pipe, polyurethane thermal insulation and a casing of polyethylene
2021-09-01
9/2021
www.iss.rs 41
2021
DAV
EN 17415-3:2021 District cooling pipes Bonded single pipe systems for directly buried cold water networks Part 3: Factory made steel valve assembly for steel or plastic service pipe, polyurethane thermal insulation and a casing of polyethylene
2021-09-01
13. CEN/TC 113 – Heat pumps and air conditioning units
EN 1397:2021 Heat exchangers Hydronic room fan coil units Test procedures for establishing the performance
2021-09-01
14. CEN/TC 121 – Welding and allied processes
EN ISO 3834-1:2021 Quality requirements for fusion welding of metallic materials Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2021)
2021-09-22
EN ISO 13918:2018/A1:2021 Welding Studs and ceramic ferrules for arc stud welding Amendment 1 (ISO 13918:2017/ /Amd 1:2021)
2021-09-15
15. CEN/TC 132 – Aluminium and aluminium alloys
EN 603-3:2021 Aluminium and aluminium alloys Wrought forging stock Part 3: Tolerances on dimensions and form
2021-09-22
EN ISO 7668:2021 Anodizing of aluminium and its alloys Measu-rement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60° or 85° (ISO 7668:2021)
2021-09-01
16. CEN/TC 134 – Resilient, textile and laminate floor coverings
EN 13329:2016 + A2:2021 Laminate floor coverings Elements with a surface layer based on aminoplastic thermosetting resins
Specifications, requirements and test methods
2021-09-22
EN 14978:2016 + A1:2021 Laminate floor coverings Elements with acrylic based surface layer, electron beam cured Speci-fications, requirements and test methods
2021-09-22
EN 15468:2016 + A1:2021 Laminate floor coverings Elements with directly applied printing and resin surface layer Speci-fications, requirements and test methods
2021-09-22
17. CEN/TC 136 – Sports, playground and other recreational facilities and equipment
EN 913:2018 + A1:2021 Gymnastic equipment General safety requirements and test methods
2021-09-15
9/2021
42 www.iss.rs
2021
DAV
18. CEN/TC 139 – Paints and varnishes
EN ISO 13885-1:2021 Gel permeation chromatography (GPC) Part 1: Tetrahydrofuran (THF) as eluent (ISO 13885-1:2020)
2021-09-01
EN ISO 13885-2:2021 Gel permeation chromatography (GPC) Part 2: N,N-Dimenthylacetamide (DMAC) as eluent (ISO 13885-2:2020)
2021-09-01
EN ISO 13885-3:2021 Gel permeation chromatography (GPC) Part 3: Water as eluent (ISO 13885-3:2020)
2021-09-01
EN ISO 22553-7:2021 Paints and varnishes Electro-deposition coatings Part 7: Electrical wet-film resistance (ISO
22553-7:2020)
2021-09-01
EN ISO 22553-8:2021 Paints and varnishes Electro-deposition coatings Part 8: Electric charge density (ISO 22553-8:2020)
2021-09-01
EN ISO 22553-9:2021 Paints and varnishes Electro-deposition coatings Part 9: Stoving loss (ISO 22553-9:2020)
2021-09-01
EN ISO 22553-11:2021 Paints and varnishes Electro-deposition coatings Part 11: Bath stability (ISO 22553-11:2020)
2021-09-01
EN ISO 22553-12:2021 Paints and varnishes Electro-deposition coatings Part 12: Sedimentation on horizontal areas
(ISO 22553-12:2020)
2021-09-01
19. CEN/TC 140 – In vitro diagnostic medical devices
EN ISO 6717:2021 In vitro diagnostic medical devices Single-use containers for the collection of specimens from humans other than blood (ISO 6717:2021)
2021-09-08
20. CEN/TC 172 – Pulp, paper and board
EN ISO 12625-7:2021 Tissue paper and tissue products Part 7: Determi-nation of optical properties Measurement of brigh-tness and colour with D65/10° (outdoor daylight) (ISO 12625-7:2021)
2021-09-15
21. CEN/TC 189 – Geosynthetics
EN 12447:2021 Geotextiles and geotextile-related products Scree-ning test method for determining the resistance to hydrolysis in water
2021-09-01
22. CEN/TC 191 – Fixed firefighting systems
EN 14972-14:2021 Fixed firefighting systems Water mist systems Part 14: Test protocol for combustion turbines in enclosures exceeding 260 m³ for open nozzle systems
2021-09-15
EN 14972-15:2021 Fixed firefighting systems Water mist systems Part 15: Test protocol for combustion turbines in enclosures not exceeding 260 m³ for open nozzle systems
2021-09-15
9/2021
www.iss.rs 43
2021
DAV
23. CEN/TC 204 – Sterilization of medical devices
EN ISO 17664-1:2021 Processing of health care products Information to be provided by the medical device manufacturer for the processing of medical devices Part 1: Critical and semi-critical medical devices (ISO 17664-1:2021)
2021-09-01
24. CEN/TC 210 – GRP tanks and vessels
EN 13121-1:2021 GRP tanks and vessels for use above ground Part 1: Raw materials Specification conditions and acceptance criteria
2021-09-22
25. CEN/TC 216 – Chemical disinfectants and antiseptics
EN 12353:2021 Chemical disinfectants and antiseptics Preser-vation of test organisms used for the determination of bactericidal (including Legionella), mycobacte-ricidal, sporicidal, fungicidal and virucidal (including bacteriophages) activity
2021-09-01
26. CEN/TC 228 – Heating systems and water based cooling systems in buildings
EN ISO 11855-3:2021 Building environment design Embedded radiant heating and cooling systems Part 3: Design and dimensioning (ISO 11855-3:2021)
2021-09-01
EN ISO 11855-4:2021 Building environment design Embedded radiant heating and cooling systems Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) (ISO 11855-4:2021)
2021-09-01
EN ISO 11855-5:2021 Building environment design Embedded radiant heating and cooling systems Part 5: Installation (ISO 11855-5:2021)
2021-09-01
27. CEN/TC 247 – Building Automation, Controls and Building Management
EN 14908-8:2021 Open Data Communication in Building Automation, Controls and Building Management Control Net-work Protocol Part 8: Communication using Broad-band over Power Line Networks with internet protocols
2021-09-01
EN 14908-9:2021 Open Data Communication in Building Automation, Controls and Building Management Control Net-work Protocol Part 9: Wireless Communication in ISM bands
2021-09-01
9/2021
44 www.iss.rs
2021
DAV
28. CEN/TC 248 – Textiles and textile products
EN ISO 5470-2:2021 Rubber- or plastics-coated fabrics Determination of abrasion resistance Part 2: Martindale abrader (ISO 5470-2:2021)
2021-09-08
EN ISO 30023:2021 Textiles Qualification symbols for labelling work-wear to be industrially laundered (ISO 30023:2021)
2021-09-08
29. CEN/TC 249 – Plastics
EN 17410:2021 Plastics Controlled loop recycling of PVC-U profiles from windows and doors
2021-09-22
EN ISO 13000-1:2021 Plastics Polytetrafluoroethylene (PTFE) semifinis-hed products Part 1: Requirements and designation (ISO 13000-1:2021)
2021-09-01
EN ISO 13000-2:2021 Plastics Polytetrafluoroethylene (PTFE) semifinis-hed products Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2021)
2021-09-01
30. CEN/TC 256 – Railway applications
EN ISO 3381:2021 Railway applications Acoustics Noise measu-rement inside railbound vehicles (ISO 3381:2021)
2021-09-22
31. CEN/TC 267 – Industrial piping and pipelines
EN 13480-3:2017/A4:2021 Metallic industrial piping Part 3: Design and calculation
2021-09-22
32. CEN/TC 276 – Surface active agents
EN 17035:2021 Surface active agents Bio-based surfactants Requirements and test methods
2021-09-22
33. CEN/TC 278 – Intelligent transport systems
CEN ISO/TS 17573-3:2021 Electronic fee collection System architecture for vehicle-related tolling Part 3: Data dictionary (ISO/TS 17573-3:2021)
2021-09-15
34. CEN/TC 290 – Dimensional and geometrical product specification and verification
EN ISO 10360-10:2021 Geometrical product specifications (GPS) Accep-tance and reverification tests for coordinate mea-suring systems (CMS) Part 10: Laser trackers (ISO 10360-10:2021)
2021-09-15
9/2021
www.iss.rs 45
2021
DAV
EN ISO 10360-13:2021 Geometrical product specifications (GPS) Accep-tance and reverification tests for coordinate mea-suring systems (CMS) Part 13: Optical 3D CMS (ISO 10360-13:2021)
2021-09-22
35. CEN/TC 301 – Road vehicles
EN 17507:2021 Road vehicles Portable Emission Measuring Systems (PEMS) Performance assessment
2021-09-15
36. CEN/TC 329 – Tourism services
EN ISO 18513:2021 Tourism services Hotels and other types of tourism accommodation Vocabulary (ISO 18513:2021)
2021-09-08
37. CEN/TC 333 – Cycles
EN 17406:2020 + A1:2021 Classification for bicycles usage 2021-09-22
38. CEN/TC 341 – Geotechnical Investigation and Testing
EN ISO 17892-12:2018/ A1:2021
Geotechnical investigation and testing Laboratory testing of soil Part 12: Determination of liquid and plastic limits Amendment 1 (ISO 17892-12:2018/ /Amd 1:2021)
2021-09-08
EN ISO 22476-4:2021 Geotechnical investigation and testing Field testing Part 4: Prebored pressuremeter test by Ménard procedure (ISO 22476-4:2021)
2021-09-15
39. CEN/TC 343 – Solid Recovered Fuels
EN ISO 22940:2021 Solid recovered fuels Determination of elemental composition by X-ray fluorescence (ISO 22940:2021)
2021-09-08
40. CEN/TC 386 – Photocatalysis
EN 16980-1:2021 Photocatalysis Continuous flow test methods Part 1: Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials
2021-09-15
41. CEN/TC 392 – Cosmetics
EN ISO 21392:2021 Cosmetics Analytical methods Measurement of traces of heavy metals in cosmetic finished products using ICP/MS technique (ISO 21392:2021)
2021-09-01
42. CEN/TC 392 – Cosmetics
EN 13012:2021 Petrol filling stations Construction and performance of automatic nozzles for use on fuel dispensers
2021-09-15
9/2021
46 www.iss.rs
2021
DAV
EN 13617-1:2021 Petrol filling stations Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
2021-09-15
EN 13617-2:2021 Petrol filling stations Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers
2021-09-15
EN 13617-3:2021 Petrol filling stations Part 3: Safety requirements for construction and performance of shear valves
2021-09-15
EN 13617-4:2021 Petrol filling stations Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers
2021-09-15
43. CEN/TC 459/SC 5 – Steels for heat
treatment, alloy steels, free-cutting
steels and stainless steels
EN 10132:2021 Cold rolled narrow steel strip for heat treatment Technical delivery conditions
2021-09-15
44. CEN/TC 463 – Microbiology of the food
chain
EN ISO 6888-1:2021 Microbiology of the food chain Horizontal method for the enumeration of coagulase-positive staphylo-cocci (Staphylococcus aureus and other species) Part 1: Method using Baird-Parker agar medium (ISO 6888-1:2021)
2021-09-08
EN ISO 6888-2:2021 Microbiology of the food chain Horizontal method for the enumeration of coagulase-positive staphylo-cocci (Staphylococcus aureus and other species) Part 2: Method using rabbit plasma fibrinogen agar medium (ISO 6888-2:2021)
2021-09-08
9/2021
www.iss.rs 47
(CENELEC)
2021
:
2021
1. CEN/CLC/Guides – Group for CEN-CENELEC Guides
CEN/CLC Guide 38 Guide for multifuel stations 2021-09-15
2. CEN/CLC/JTC 5 – Space
prCEN/TR 17603-32-21 Space engineering Adhesive bonding handbook 2021-09-08
prCEN/TR 17603-32-22 Space engineering Insert design handbook 2021-09-08
prCEN/TR 17603-32-23 Space engineering Threaded fasteners handbook 2021-09-08
prCEN/TR 17603-32-24 Space engineering Buckling of structures 2021-09-08
prCEN/TR 17603-32-25 Space engineering Mechanical shock design and verification handbook
2021-09-08
prCEN/TR 17603-32-26 Space engineering Spacecraft mechanical loads analysis handbook
2021-09-08
prCEN/TR 17603-40 Space engineering Software engineering handbook 2021-09-08
prCEN/TR 17603-40-01 Space engineering Agile software development handbook
2021-09-08
prCEN/TR 17603-50 Space engineering Communication guidelines 2021-09-08
3. CEN/CLC/JTC 13 – Cybersecurity and Data Protection
WI JT013043 (WI=JT013043)
Multi-layered approach for a set of requirements for information/cyber security controls for Cloud Services
2021-09-08
WI JT013044 (WI=JT013044)
Requirements for Conformity Assessment Bodies certifying Cloud Services
2021-09-08
9/2021
48 www.iss.rs
2021
4. CLC/SR 107 – Process management for avionics
EN IEC 62668-1:2019/prA1 Process management for avionics Counterfeit prevention Part 1: Avoiding the use of counterfeit, fraudulent and recycled electronic components
2021-09-06
5. CLC/SR 112 – Evaluation and qualification of electrical insulating materials and systems (to be defined)
prEN IEC 61857-42 Electrical insulation systems Procedures for thermal evaluation Part 42: Specific requirements for evaluation of an electrical insulation system (EIS) used for road transportation applications
2021-09-20
prEN IEC 62631-3-2 Dielectric and resistive properties of solid insulating materials Part 3-2: Determination of resistive properties (DC methods) Surface resistance and surface resistivity
2021-09-20
6. CLC/SR 125 – Personal e-Transporters (PeTs)
prEN IEC 63281-2-1 Personal e-Transporters Part 2-1: Test method for total run time of e-scooter with consideration to environmental conditions of actual use
2021-09-20
7. CLC/SR 46F – RF and microwave passive components
prEN IEC 61169-70 IEC 61169-70 Ed 1.0: Radio-frequency connectors Part 70: Sectional specifications RF coaxial connec-tors with bayonett locking and characteristic impe-dance 75 Ohm (Type HD-BNC)
2021-09-20
prEN IEC 61169-72 RADIO-FREQUENCY CONNECTORS Part 72: Sectional specification for Precision SMP3 series coaxial connectors as test connector
2021-09-20
8. CLC/SR 47D – Mechanical standardization of semiconductor devices
prEN IEC 63378-3 Thermal standardization on semiconductor packages Part 3: Thermal circuit simulation models of
semiconductor packages for transient analysis
2021-09-20
9. CLC/SR 68 – Magnetic alloys and steels
prEN IEC 63311 Permanent magnet (magnetically hard) materials Method of measurement based upon the pulsed
field magnetometry (PFM) technique
2021-09-20
9/2021
www.iss.rs 49
2021
10. CLC/SR 96 – Transformers, reactors, power supply units, and combinations thereof
prEN IEC 61558-2-20 Safety of transformers, reactors, power supply units and combinations thereof Part 2-20: Particular requirements and tests for small reactors
2021-09-13
11. CLC/TC 13 – Electrical energy measurement and control
prEN IEC 62052-31 Electricity metering equipment (AC) General requirements, tests and test conditions Part 31: Product safety requirements and tests
2021-09-13
prEN IEC 62057-3 IEC 62057-3 ED1 Test equipment, techniques and procedures for electrical energy meters Part 3: Automatic Meter Testing System (AMTS)
2021-09-20
12. CLC/TC 20 – Electric cables
prEN IEC 61442 Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
2021-09-13
13. CLC/TC 21X – Secondary cells and batteries
EN 62620:2015/prA1 Secondary cells and batteries containing alkaline or other non-acid electrolytes Secondary lithium cells and batteries for use in industrial applications
2021-09-13
14. CLC/TC 26 – Electric welding
FprEN IEC 60974-1:2021/ prAA
Arc welding equipment Part 1: Welding power sources
2021-09-15
15. CLC/TC 37A – Low voltage surge protective devices
prEN IEC 61643-21 Low voltage surge protective devices Part 21: Surge protective devices connected to telecommunications and signalling networks Performance requirements and testing methods
2021-09-13
16. CLC/TC 57 – Power systems management and associated information exchange
prEN IEC 61850-7-410 Communication networks and systems for power utility automation Part 7-410: Basic communication structure Hydroelectric power plants Communi-cation for monitoring and control
2021-09-20
9/2021
50 www.iss.rs
2021
prEN IEC 61970-303 Energy Management System Application Program Interface (EMS-API) Part 303: Common information model (CIM), Network Model Management
2021-09-20
prEN IEC 61970-459 Energy Management System Application Program Interface (EMS-API) Part 459: Framework for managing shared network model information
2021-09-20
17. CLC/TC 59X – Performance of household and similar electrical appliances
WI 74539 (WI=74539)
Household and similar electrical appliances Material Efficiency Assessment of applicability of EN 4555X
2021-09-15
18. CLC/TC 61 – Safety of household and similar electrical appliances
EN 60335-2-27:2013/prAC Household and similar electrical appliances Safety Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation
2021-09-23
EN 60335-2-50:2003/prAA Household and similar electrical appliances Safety Part 2-50: Particular requirements for commercial
electric bains-marie
2021-09-08
EN IEC 60335-2-110:202X/ prA1
Household and similar electrical appliances Safety Part 2-110: Particular requirements for commercial
microwave appliances with insertion or contacting applicators
2021-09-08
19. CLC/TC 62 – Electrical equipment in medical practice
prEN IEC 62220-2 Medical electrical equipment Characteristics of digital X-ray imaging devices Part 2: Determination of dual-energy subtraction efficiency Detectors used for dual-energy radiographic imaging
2021-09-20
20. CLC/TC 64 – Electrical installations and protection against electric shock
HD 60364-5-52:2011/prA1 Low-voltage electrical installations Part 5-52: Selection and erection of electrical equipment Wiring systems
2021-09-20
21. CLC/TC 65X – Industrial-process measu-rement, control and automation
prEN IEC 62453-1 Field device tool (FDT) interface specification Part 1: Overview and guidance
2021-09-13
9/2021
www.iss.rs 51
2021
prEN IEC 63187 Functional safety Framework for safety critical E/E/PE systems for defence industry applications
2021-09-13
22. CLC/TC 66X – Electrical and electronic test and measuring instruments, systems and accessories
prEN IEC 61010-2-011 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-011: Particular requirements for refrigerating equipment
2021-09-20
prEN IEC 61010-2-012 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment
2021-09-20
23. CLC/TC 69X – Electrical systems for electric road vehicles
prEN IEC 61851-23-3 <p>Electric vehicle conductive charging system Part 23-3: DC electric vehicle supply equipment for Megawatt charging systems</p>
2021-09-13
prEN IEC 63243 Interoperability and safety of dynamic wireless power transfer (WPT) for electric vehicles
2021-09-20
24. CLC/TC 78 – Equipment and tools for live working
prEN IEC 60903 Live working Electrical insulating gloves 2021-09-20
prEN IEC 60984 Live working Electrical insulating sleeves 2021-09-20
25. CLC/TC 81X – Lightning protection
prEN IEC 62561-4 Lightning protection system components (LPSC) Part 4: Requirements for conductor fasteners
2021-09-20
26. CLC/TC 82 – Solar photovoltaic energy systems
EN 61853-2:2016/prA1 Photovoltaic (PV) module performance testing and energy rating Part 2: Spectral responsivity, incidence angle and module operating temperature measurements
2021-09-20
prEN IEC 62109-1 Safety of power converters for use in photovoltaic power systems Part 1: General requirements
2021-09-20
prEN IEC 62109-2 Safety of power converters for use in photovoltaic power systems Part 2: Particular requirements for inverters
2021-09-20
9/2021
52 www.iss.rs
2021
prEN IEC 63257 Power line communication for DC shutdown equipment
2021-09-20
27. CLC/TC 86BXA – Fibre optic interconnect,
passive and connectorised components
prEN IEC 61300-2-33 Fibre optic interconnecting devices and passive components Basic test and measurement proce-dures Part 2-33: Tests Assembly and disassembly of fibre optic mechanical splices, fibre management systems and protective housings
2021-09-20
28. CLC/TC 100X – Audio, video and
multimedia systems and equipment
and related sub-systems
prEN IEC 62087-2 Audio, video, and related equipment Determination of power consumption Part 2: Signals and media (TA 19)
2021-09-13
prEN IEC 62087-3 Audio, video, and related equipment Determi-nation of power consumption Part 3: Television sets (TA 19)
2021-09-13
29. CLC/TC 111X – Environment
prEN IEC 62321-3-1 DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS Part 3-1: Ele-mental Screening by X-ray fluorescence spectrometry
2021-09-20
30. CLC/TC 205 – Home and Building Electronic
Systems (HBES)
prEN 50090-6-3 Home and Building Electronic Systems (HBES) Part 6-3 -3rd Party HBES IoT API
2021-09-15
31. CLC/TC 210 – Electromagnetic Compatibility
(EMC)
prEN IEC 55037 Industrial, scientific and medical equipment Radio-frequency disturbance characteristics Limits and methods for measurements in situ and at defined site
2021-09-13
9/2021
www.iss.rs 53
2021
www.iss.rs,
2021
1. CEN/CLC/JTC 13 – Cybersecurity and Data Protection
prEN ISO 27007 Information security, cybersecurity and privacy pro-tection Guidelines for information security mana-gement systems auditing (ISO/IEC 27007:2020)
2021-09-02
2. CLC/SR 46F – RF and microwave passive components
prEN IEC 61169-69:2021 Radio Frequency Connectors Part 69: Sectional specification for series SMP3 RF coaxial connectors
2021-09-03
3. CLC/TC 14 – Power transformers
prEN IEC 60076-25:2021 Power transformers Part 25: Neutral grounding resistors
2021-09-17
4. CLC/TC 34 – Lamps and related equipment
EN IEC 60810:2018/prA2:2021 Amendment 2 Lamps, light sources and LED pac-kages for road vehicles Performance requirements
2021-09-03
prEN IEC 62386-101:2021 Digital addressable lighting interface Part 101: General requirements System components
2021-09-17
prEN IEC 62386-102:2021 Digital addressable lighting interface Part 102: General requirements Control gear
2021-09-17
9/2021
54 www.iss.rs
2021
prEN IEC 62386-103:2021 Digital addressable lighting interface Part 103: General requirements Control devices
2021-09-17
5. CLC/TC 46X – Communication cables
prEN IEC 62037-7:2021 Passive RF and Microwave devices, intermodulation level measurement Part 7: Field measurements of passive intermodulation
2021-09-03
prEN IEC 62037-8:2021 Measurement of passive intermodulation generated by objects exposed to RF radiation
2021-09-03
6. CLC/TC 59X – Performance of household and similar electrical appliances
prEN IEC 61855:2021 Household and similar use electrical hair care app-liances Methods for measuring the performance
2021-09-10
7. CLC/TC 61 – Safety of household and similar electrical appliances
EN 50570:2013/prA2:2021 Household and similar electrical appliances Safety Particular requirements for commercial electric tumble dryers
2021-09-03
EN 50571:2013/prA2:2021 Household and similar electrical appliances Safety Particular requirements for commercial electric washing machines
2021-09-03
prEN IEC 60335-2-34:2021 Household and similar electrical appliances Safety Part 2-34: Particular requirements for motor-compressors
2021-09-10
prEN IEC 60335-2-34:2021/ prA11:2021
Household and similar electrical appliances Safety Part 2-34: Particular requirements for motor-compressors
2021-09-10
FprEN IEC 60335-2-58:2021/ prAA:2021
Household and similar electrical appliances Safety Part 2-58: Particular requirements for commercial electric dishwashing machines
2021-09-03
FprEN IEC 60335-2-103:2021/ prA1:2021
Household and similar electrical appliances Safety Part 2-103: Particular requirements for drives for gates, doors and windows
2021-09-03
FprEN IEC 60335-2-103:2021/ prA2:2021
Household and similar electrical appliances Safety Part 2-103: Particular requirements for drives for gates, doors and windows
2021-09-03
FprEN IEC 60335-2-103:2021/ prAA:2021
Household and similar electrical appliances Safety Part 2-103: Particular requirements for drives for gates, doors and windows
2021-09-03
prEN IEC 60335-2-113:2021 Household and similar electrical appliances Safety Part 2-113: Particular requirements for cosmetic and beauty care appliances incorporating lasers and intense light sources
2021-09-10
9/2021
www.iss.rs 55
2021
prEN IEC 60335-2-113:2021/ prA11:2021
Household and similar electrical appliances Safety Part 2-113: Particular requirements for cosmetic and beauty care appliances incorporating lasers and intense light sources
2021-09-10
prEN IEC 60335-2-115:2021 Household and similar electrical appliances Safety Part 2-115: Particular requirements for skin beauty care appliances
2021-09-10
prEN IEC 60335-2-115:2021/ prA11:2021
Household and similar electrical appliances Safety Part 2-115: Particular requirements for skin beauty care appliances
2021-09-10
8. CLC/TC 62 – Electrical equipment in medical practice
EN IEC 80601-2-26:2020/ prA1:2021
Amendment 1 Medical electrical equipment Part 2-26: Particular requirements for the basic safety and essential performance of electro-encephalograph
2021-09-10
EN IEC 80601-2-59:2019/ prA1:2021
Amendment 1 Medical electrical equipment Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening
2021-09-10
prEN IEC 60601-2-54:2021 Medical electrical equipment Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
2021-09-10
9. CLC/TC 65X – Industrial-process measu-rement, control and automation
prEN IEC 61139-2:2021 Industrial networks Single-drop digital communi-cation interface Part 2: Functional safety extensions
2021-09-03
prEN IEC 63206:2021 Industrial Process control systems Recorders 2021-09-10
10. CLC/TC 82 – Solar photovoltaic energy systems
EN IEC 61215-1-3:2021/ prA1:2021
Amendment 1 Terrestrial photovoltaic (PV) modules Design qualification and type approval Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules
2021-09-03
EN IEC 61215-1-4:2021/ prA1:2021
Amendment 1 Terrestrial photovoltaic (PV) modules Design qualification and type approval Part 1-4: Special requirements for testing of thin-film Cu(In,Ga)(S,Se)2 based photovoltaic (PV) modules
2021-09-03
9/2021
56 www.iss.rs
2021
11. CLC/TC 86BXA – Fibre optic interconnect,
passive and connectorised components
prEN IEC 61300-2-5:2021 Fibre optic interconnecting devices and passive components Basic test and measurement proce-dures Part 2-5: Tests Torsion
2021-09-10
prEN IEC 61300-3-35:2021 Fibre optic interconnecting devices and passive components Basic test and measurement proce-dures Part 3-35: Examinations and measurements
Visual inspection of fibre optic connectors and fibre-stub transceivers
2021-09-10
12. CLC/TC 99X – Power installations
exceeding 1 kV a.c. (1,5 kV d.c.)
prEN IEC 60071-12:2021 Insulation co-ordination Part 12: Application guidelines for LCC HVDC converter stations
2021-09-24
13. CLC/TC 213 – Cable management systems
prEN IEC 61537:2021 Cable management Cable tray systems and cable ladder systems
2021-09-10
prEN IEC 61537:2021/ prAA:2021
Cable management Cable tray systems and cable ladder systems
2021-09-10
prEN IEC 63355:2021 Cable management systems Test method for content of halogens
2021-09-03
9/2021
www.iss.rs 57
2021
(DAV date of availability).
DAV
1. CEN/CLC/JTC 1 – Criteria for conformity
assessment bodies
EN ISO/IEC 17030:2021 Conformity assessment General requirements for third-party marks of conformity (ISO/IEC 17030:2021)
2021-09-22
2. CEN/CLC/JTC 3 – Quality management and corresponding general aspects for medical devices
EN ISO 13485:2016/ A11:2021
Medical devices Quality management systems Re-quirements for regulatory purposes (ISO 13485:2016)
2021-09-08
3. CEN/CLC/JTC 4 – Services for fire safety and security systems
EN 50710:2021 Requirements for the provision of secure remote services for fire safety systems and security systems
2021-09-24
4. CEN/CLC/JTC 5 – Space
EN 16602-70-15:2021 Space product assurance Non-destructive testing 2021-09-01
EN 16603-10-04:2021 Space engineering Space environment 2021-09-01
EN IEC 60152:2021 Designation of phase differences by hour numbers in three-phase AC systems
2021-09-03
EN IEC 60445:2021 Basic and safety principles for man-machine interface, marking and identification Identification of equip-ment terminals, conductor terminations and conductors
2021-09-03
5. CLC/SR 86C – Fibre optic systems and active devices
EN IEC 61757-2-1:2021 Fibre optic sensors Part 2-1: Temperature measure-ment Temperature sensors based on fibre Bragg gratings
2021-09-17
9/2021
58 www.iss.rs
DAV
6. CLC/SR 89 – Fire hazard testing
EN IEC 60695-6-1:2021 Fire hazard testing Part 6-1: Smoke obscuration General guidance
2021-09-17
7. CLC/SR 91 – Electronics assembly technology
EN IEC 60068-2-21:2021 Environmental testing Part 2-21: Tests Test U: Robustness of terminations and integral mounting devices
2021-09-03
EN IEC 61760-2:2021 Surface mounting technology Part 2: Transportation and storage conditions of surface mounting devices (SMD) Application guide
2021-09-03
8. CLC/TC 9X – Electrical and electronic applications for railways
EN 50546:2020/AC:2021-09 Railway applications Rolling Stock Three-phase shore (external) supply system for rail vehicles and its connectors
2021-09-24
9. CLC/TC 11 – Overhead electrical lines exceeding 1 kV a.c. (1,5 kV d.c.)
EN IEC 60652:2021 Overhead line structures Loading tests 2021-09-17
10. CLC/TC 17AC – High-voltage switchgear and controlgear
EN IEC 62271-101:2021 High-voltage switchgear and controlgear Part 101: Synthetic testing
2021-09-17
EN IEC 62271-112:2021 High-voltage switchgear and controlgear Part 112: Alternating current high-speed earthing switches for secondary arc extinction on transmission lines
2021-09-03
11. CLC/TC 21X – Secondary cells and batteries
EN 62133-2:2017/A1:2021 Secondary cells and batteries containing alkaline or other non-acid electrolytes Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications Part 2: Lithium systems
2021-09-03
12. CLC/TC 23E – Circuit breakers and similar devices for household and similar applications
EN 62423:2012/AC:2021-09 Type F and type B residual current operated circuit- -breakers with and without integral overcurrent protection for household and similar uses
2021-09-10
EN IEC 61316:2021 Industrial cable reels 2021-09-03
9/2021
www.iss.rs 59
DAV
13. CLC/TC 40XA – Capacitors and EMI suppre –ssion components
EN IEC 60384-24:2021 Fixed capacitors for use in electronic equipment Part 24: Sectional specification Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte
2021-09-03
EN IEC 60384-25:2021 Fixed capacitors for use in electronic equipment Part 25: Sectional specification: Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte
2021-09-03
14. CLC/TC 45AX – Instrumentation, control and electrical systems of nuclear facilities
EN IEC 60987:2021 Nuclear power plants Instrumentation and control important to safety Hardware requirements
2021-09-17
15. CLC/TC 46X – Communication cables
EN IEC 62153-4-7:2021 Metallic cables and other passive components test methods Part 4-7: Electromagnetic compatibility (EMC) Test method for measuring of transfer impedance Z<sub>T</sub> and screening attenuation a<sub>S</sub> or coupling attenuation a<sub>C</sub> of connectors and assemblies Triaxial tube in tube method
2021-09-03
EN IEC 62153-4-15:2021 Metallic cables and other passive components test methods Part 4-15: Electromagnetic compatibility (EMC) Test method for measuring transfer impedance and screening attenuation or coupling attenuation with triaxial cell
2021-09-17
16. CLC/TC 55 – Winding wires
EN IEC 60317-84:2021 Specifications for particular types of winding wires Part 84: Polyesterimide enamelled round copper wire, class 200
2021-09-17
17. CLC/TC 61 – Safety of household and similar electrical appliances
EN IEC 60335-2-87:2020/ A1:2021
Household and similar electrical appliances Safety Part 2-87: Particular requirements for electrical animal-stunning equipment
2021-09-10
18. CLC/TC 64 – Electrical installations and protection against electric shock
HD 60364-8-2:2018/ A12:2021
Low-voltage electrical installations Part 8-2: Prosumer's low-voltage electrical installations
2021-09-03
9/2021
60 www.iss.rs
DAV
19. CLC/TC 66X – Electrical and electronic test and measuring instruments, systems and accessories
EN IEC 61010-2-051:2021 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
2021-09-10
EN IEC 61010-2-051:2021/ A11:2021
Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
2021-09-10
EN IEC 61010-2-061:2021 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-061: Particular requirements for laboratory atomic spectro-meters with thermal atomization and ionization
2021-09-10
EN IEC 61010-2-061:2021/ A11:2021
Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-061: Particular requirements for laboratory atomic spectro-meters with thermal atomization and ionization
2021-09-10
20. CLC/TC 82 – Solar photovoltaic energy systems
EN 50524:2021 Data sheet for photovoltaic inverters 2021-09-10
21. CLC/TC 86A – Optical fibres and optical fibre cables
EN IEC 60794-1-401:2021 Optical fibre cables Part 1-401: Generic specification Basic optical cable test procedures Electrical test
methods Short-circuit test (for OPGW, OPPC and OPAC), Method H1
2021-09-17
EN IEC 60794-1-402:2021 Optical fibre cables Part 1-402: Generic specification Basic optical cable test procedures Electrical
test methods Lightning test (for OPGW, OPPC and OPAC), Method H2
2021-09-17
22. CLC/TC 95X – Measuring relays and protection equipment
EN IEC 60255-187-1:2021 Measuring relays and protection equipment Part 187-1: Functional requirements for differential protection Restrained and unrestrained differential protection of motors, generators and transformers
2021-09-17
23. CLC/TC 116 – Safety of motor-operated electric tools
EN 50632-2-5:2016/A1:2021 Electric motor-operated tools Dust measurement procedure Part 2-5: Particular requirements for circular saws
2021-09-24
9/2021
www.iss.rs 61
DAV
EN 50632-2-14:2016/ A1:2021
Electric motor-operated tools Dust measurement procedure Part 2-14: Particular requirements for planers
2021-09-24
EN 50632-2-17:2016/ A1:2021
Electric motor-operated tools Dust measurement procedure Part 2-17: Particular requirements for routers and trimmers
2021-09-24
EN 50632-2-19:2016/ A1:2021
Electric motor-operated tools Dust measurement procedure Part 2-19: Particular requirements for jointers
2021-09-24
EN 50632-3-1:2016/A1:2021 Electric motor-operated tools Dust measurement procedure Part 3-1: Particular requirements for transportable table saws
2021-09-24
EN 50632-3-9:2016/A1:2021 Electric motor-operated tools Dust measurement procedure Part 3-9: Particular requirements for transportable mitre saws
2021-09-24
24. CLC/TC 213 – Cable management systems
EN 50520:2020/A1:2021 Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations
2021-09-17
EN 61534-21:2014/A1:2021 Powertrack systems Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting
2021-09-24
EN 61534-21:2014/ A11:2021
Powertrack systems Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting
2021-09-24
EN 61534-22:2014/A1:2021 Powertrack systems Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation
2021-09-24
EN 61534-22:2014/ A11:2021
Powertrack systems Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation
2021-09-24
9/2021
62 www.iss.rs
7
(see http://webapp.etsi.org/action/pu/20210905/20210905.htm)
85
(see http://webapp.etsi.org/action/pu/20210912/20210912.htm)
1
(see http://webapp.etsi.org/action/pu/20210926/20210926.htm)
(ISO)
2021 64
2021 74
(I C)
2021 86
2021 91
9/2021
64 www.iss.rs
(ISO)
2021
,
-
-
1. ISO/IEC JTC 1 – Information technology
ISO/IEC DIS 5733 Information technology Cloud Data Management Interface (CDMITM) Version 2.0
2021-09-24
2. ISO/IEC JTC 1/SC 24 – Computer graphics, image processing and environmental data representation
ISO/IEC DIS 3721-1 Information technology Computer graphics, image processing and environmental data representation Information model for Mixed and Augmented Reality Contents Part 1: Core Objects and Attributes
2021-09-01
3. ISO/IEC JTC 1/SC 27 – Information security, cybersecurity and privacy protection
ISO/IEC DIS 27036-2 Cybersecurity Supplier relationships Part 2: Requirements
2021-09-09
9/2021
www.iss.rs 65
4. ISO/IEC JTC 1/SC 28 – Office equipment
ISO/IEC DIS 22954 Information technology Office equipment Automated colour profile distribution
2021-09-21
5. ISO/IEC JTC 1/SC 37 – Biometrics
ISO/IEC DIS 19794-14 Information technology Biometric data interchange formats Part 14: DNA data
2021-09-28
6. IULTCS – International Union of Leather
Technologists and Chemists Societies
ISO/DIS 14268 Leather Physical and mechanical tests Determination of water vapour permeability
2021-09-30
ISO/DIS 17072-2 Leather Chemical determination of metal content Part 2: Total metal content
2021-09-16
ISO/DIS 18218-1 Leather Determination of ethoxylated alkylphenols Part 1: Direct method
2021-09-21
ISO/DIS 23702-1 Leather - Per- and polyfluoroalkyl substances Part 1: Determination of non-volatile compounds by extraction method using liquid chromatography
2021-09-21
7. ISO/TC 6 – Paper, board and pulps
ISO/DIS 5263-3 Pulps Laboratory wet disintegration Part 3: Disinte-gration of mechanical pulps at > 85°C
2021-09-10
ISO/DIS 5270-2 Pulps Laboratory sheets Determination of physical properties
2021-09-13
ISO/DIS 24196 Lignins Determination of lignin content in kraft lignin, soda lignin, and hydrolysis lignin
2021-09-02
8. ISO/TC 6/SC 2 – Test methods and quality
specifications for paper and board
ISO/DIS 12625-18 Tissue paper and tissue products Part 18: Determination of surface friction
2021-09-14
9. ISO/TC 8 – Ships and marine technology
ISO/DIS 23806 Ships and marine technology Cyber safety 2021-09-02
10. ISO/TC 8/SC 3 – Piping and machinery
ISO/DIS 24224 Ships and marine technology Tanker cargo manifold shore connection Technical requirements
2021-09-01
9/2021
66 www.iss.rs
ISO/DIS 24225 Ships and marine technology Pneumatic quick-closing control devices
2021-09-23
11. ISO/TC 20/SC 16 – Unmanned aircraft systems
ISO/DIS 23629-12 UAS traffic management (UTM) Part 12: Requirements for UTM service providers
2021-09-20
ISO/DIS 24356 General requirements for tethered unmanned aircraft systems
2021-09-30
12. ISO/TC 21/SC 3 – Fire detection and alarm systems
ISO/DIS 7240-12 Fire detection and alarm systems Part 12: Line type smoke detectors using a transmitted optical beam
2021-09-01
13. ISO/TC 22/SC 31 – Data communication
ISO/DIS 15118-4 Road vehicles Vehicle to grid communication interface Part 4: Network and application protocol confor-
mance test
2021-09-29
14. ISO/TC 22/SC 36 – Safety and impact testing
ISO/DIS 13215-2 Road vehicles Reduction of misuse risk of child restraint systems Part 2: Requirements and test procedures for correct installation (panel method)
2021-09-27
ISO/DIS 13215-3 Road vehicles Reduction of misuse risk of child restraint systems Part 3: Prediction and assessment of misuse by Misuse Mode and Effect Analysis (MMEA)
2021-09-27
15. ISO/TC 23/SC 6 – Equipment for crop protection
ISO 28139:2019/DAmd 1 Equipment for crop protection Knapsack combustion engine-driven airblast sprayers Safety and environ-mental requirements and test methods Amendment 1
2021-09-17
16. ISO/TC 27/SC 1 – Coal preparation: Terminology and performance
ISO/DIS 7936 Coal Determination and presentation of float and sink characteristics General directions for apparatus and procedures
2021-09-03
17. ISO/TC 27/SC 5 – Methods of analysis
ISO/DIS 23380 Coal Selection of methods for the determination of trace elements
2021-09-10
9/2021
www.iss.rs 67
18. ISO/TC 34 – Food products
ISO/DIS 24583 Quantitative nuclear magnetic resonance spectroscopy Purity determination of organic compounds used for foods and food products General requirements
2021-09-20
19. ISO/TC 34/SC 9 – Microbiology
ISO/DIS 15213-1 Microbiology of the food chain Horizontal method for the detection and enumeration of Clostridium spp. Part 1: Enumeration of sulfite-reducing Clostridium spp. by colony-count technique
2021-09-13
ISO/DIS 20976-2 Microbiology of the food chain Requirements and guidelines for conducting challenge tests of food and feed products Part 2: Challenge tests to study inactivation potential and kinetic parameters
2021-09-13
20. ISO/TC 35/SC 12 – Preparation of steel
substrates before application of paints
and related products
ISO/DIS 8504-4 Preparation of steel substrates before application of paints and related products Surface preparation methods Part 4: Acid pickling
2021-09-06
21. ISO/TC 37/SC 3 – Management of terminology
resources
ISO/DIS 12620-1 Management of terminology resources Data categories Part 1: Specifications
2021-09-30
22. ISO/TC 38 – Textiles
ISO/DIS 4333 Textiles Determination of reduction activity of specific proteins derived from pollen and mite and other sources on textile products
2021-09-22
23. ISO/TC 43/SC 1 – Noise
ISO/DIS 5128 Acoustics Measurement of interior vehicle noise 2021-09-20
24. ISO/TC 44/SC 10 – Quality management in the
field of welding
ISO/DIS 15614-4 Specification and qualification of welding procedures for metallic materials Welding procedure test Part 4: Finishing welding of aluminium castings
2021-09-07
9/2021
68 www.iss.rs
ISO/DIS 15614-6 Specification and qualification of welding procedures for metallic materials Welding procedure test Part 6: Arc and gas welding of copper and its alloys
2021-09-09
25. ISO/TC 45/SC 3 – Raw materials (including
latex) for use in the rubber industry
ISO/DIS 2006-1 Rubber latex, synthetic Determination of mechanical stability Part 1: High-speed method
2021-09-01
ISO/DIS 24329 Low-protein natural rubber latex concentrate Speci-fication
2021-09-07
26. ISO/TC 46 – Information and documentation
ISO/DIS 233-3 Information and documentation Transliteration of Arabic characters into Latin characters Part 3: Persian language Transliteration
2021-09-14
27. ISO/TC 46/SC 8 – Quality – Statistics and
performance evaluation
ISO/DIS 2789 Information and documentation International library statistics
2021-09-09
28. ISO/TC 46/SC 9 – Identification and description
ISO/DIS 23527 Information and documentation Research activity identifier information technology Learning, education, training and research (RAiD)
2021-09-20
29. ISO/TC 59/SC 2 – Terminology and harmoni-
zation of languages
ISO/DIS 6707-3 Buildings and civil engineering works Vocabulary Part 3: Sustainability terms
2021-09-20
30. ISO/TC 61/SC 2 – Mechanical behavior
ISO/DIS 11403-2 Plastics Acquisition and presentation of comparable multipoint data Part 2: Thermal and processing properties
2021-09-27
31. ISO/TC 61/SC 14 – Environmental aspects
ISO/DIS 5412 Biodegradable plastic shopping bags for industrial composting
2021-09-09
ISO/DIS 5424 Industrial compostable drinking straws 2021-09-09
9/2021
www.iss.rs 69
32. ISO/TC 67/SC 2 – Pipeline transportation systems
ISO/DIS 24139-1 Petroleum and natural gas industries Corrosion resistant alloy clad bends and fittings for pipeline transportation system Part 1: Clad bends
2021-09-20
33. ISO/TC 79/SC 5 – Magnesium and alloys of cast or wrought magnesium
ISO/DIS 4155 Magnesium and magnesium alloys Determination of nickel Inductively coupled plasma optical emission spectrometric method
2021-09-30
ISO/DIS 4177 Magnesium and magnesium alloys Determination of chromium Inductively coupled plasma optical emission spectrometric method
2021-09-30
ISO/DIS 4181 Magnesium and magnesium alloys Determination of strontium Inductively coupled plasma optical emission spectrometric method
2021-09-30
ISO/DIS 4188 Magnesium and magnesium alloys Determination of arsenic Inductively coupled plasma optical emission spectrometric method
2021-09-30
ISO/DIS 4189 Magnesium and magnesium alloys Determination of sodium Inductively coupled plasma optical emission spectrometric method
2021-09-30
34. ISO/TC 85 – Nuclear energy, nuclear technolo-gies, and radiological protection
ISO/DIS 12749-2 Nuclear energy, nuclear technologies, and radiological protection Vocabulary Part 2: Radiological protection
2021-09-03
35. ISO/TC 85/SC 2 – Radiological protection
ISO/DIS 20044 Measurement of radioactivity in the environment Air: aerosols Test method using sampling by filter media
2021-09-28
36. ISO/TC 102/SC 3 – Physical testing
ISO/DIS 7992 Iron ores for blast furnace feedstocks Determination of reduction under load
2021-09-09
37. ISO/TC 107/SC 4 – Hot dip coatings (galvanized, etc.)
ISO/DIS 1461 Hot dip galvanized coatings on fabricated iron and steel articles Specifications and test methods
2021-09-28
9/2021
70 www.iss.rs
38. ISO/TC 108/SC 2 – Measurement and evaluation
of mechanical vibration and shock as applied to machines, vehicles and structures
ISO/DIS 21940-21 Mechanical vibration Rotor balancing Part 21: Description and evaluation of balancing machines
2021-09-28
39. ISO/TC 111/SC 3 – Components and accessories
ISO/DIS 2415 Forged shackles for general lifting purposes Dee shackles and bow shackles
2021-09-15
40. ISO/TC 121/SC 3 – Respiratory devices and related equipment used for patient care
IEC 80601-2-26:2019/ DAmd 1
Medical electrical equipment Part 2-26: Particular requirements for the basic safety and essential perfor-mance of electroencephalographs Amendment 1
2021-09-10
IEC 80601-2-59:2017/ DAmd 1
Medical electrical equipment Part 2-59: Particular requirements for the basic safety and essential perfor-mance of screening thermographs for human febrile temperature screening Amendment 1
2021-09-10
41. ISO/TC 122 – Packaging
ISO/DIS 15750-3 Packaging Steel drums Part 3: Inserted flange-type closure systems
2021-09-13
42. ISO/TC 126/SC 3 – Vape and vapour products
ISO/DIS 24211 Vapour products Determination of selected carbonyls in vapour product emissions
2021-09-21
43. ISO/TC 131/SC 4 – Connectors and similar products and components
ISO/DIS 16028 Hydraulic fluid power Flush-face type, quick-action couplings for use at pressures of 10 MPa (200 bar) to 31,5 MPa (315 bar) Specifications
2021-09-29
44. ISO/TC 135/SC 3 – Ultrasonic testing
ISO/DIS 18563-1 Non-destructive testing Characterization and verifi-cation of ultrasonic phased array equipment Part 1: Instruments
2021-09-02
45. ISO/TC 150/SC 2 – Cardiovascular implants and extracorporeal systems
ISO 18242:2016/DAmd 1 Cardiovascular implants and extracorporeal systems Centrifugal blood pumps Amendment 1: Worst-case conditions for testing
2021-09-01
9/2021
www.iss.rs 71
46. ISO/TC 154 – Processes, data elements and documents in commerce, industry and administration
ISO/DIS 34000 Date and time Concepts and vocabulary 2021-09-16
47. ISO/TC 156/SC 1 – Corrosion control engineering life cycle
ISO/DIS 24239 Fossil Fuel Power Plants Corrosion Control Engineering Life Cycle General Requirements
2021-09-02
48. ISO/TC 172/SC 3 – Optical materials and components
ISO/DIS 9802 Raw optical glass Vocabulary 2021-09-13
49. ISO/TC 176/SC 3 – Supporting technologies
ISO/DIS 10010 Quality management Organizational quality culture Guidance to achieve sustained success
2021-09-23
50. ISO/TC 180/SC 1 – Climate - Measurement and data
ISO/DIS 9845-1 Solar energy Reference solar spectral irradiance at the ground at different receiving conditions Part 1: Direct normal and hemispherical solar irradiance for air mass 1,5
2021-09-13
51. ISO/TC 182 – Geotechnics
ISO 17892-12:2018/ DAmd 2
Geotechnical investigation and testing Laboratory testing of soil Part 12: Determination of liquid and plastic limits Amendment 2
2021-09-15
52. ISO/TC 184/SC 4 – Industrial data
ISO/DIS 8000-150 Data quality Part 150: Data quality management: Roles and responsibilities
2021-09-23
53. ISO/TC 204 – Intelligent transport systems
ISO/DIS 5345 Intelligent transport systems Identifiers Processes 2021-09-03
54. ISO/TC 206 – Fine ceramics
ISO/DIS 18755 Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of thermal diffusivity of monolithic ceramics by flash method
2021-09-30
9/2021
72 www.iss.rs
55. ISO/TC 207/SC 2 – Environmental auditing and
related environmental investigations
ISO/DIS 14015 Environmental management Guidelines for Environ-mental Due Diligence Assessment
2021-09-07
56. ISO/TC 212 – Clinical laboratory testing and
in vitro diagnostic test systems
ISO/DIS 17593 Clinical laboratory testing and in vitro medical devices Requirements for in vitro monitoring systems for self- -testing of oral anticoagulant therapy
2021-09-01
57. ISO/TC 215/SC 1 – Genomics Informatics
ISO/DIS 4454 Genomics informatics Phenopackets: A format for phenotypic data exchange
2021-09-28
58. ISO/TC 220 – Cryogenic vessels
ISO/DIS 21012 Cryogenic vessels Hoses 2021-09-17
59. ISO/TC 224 – Service activities relating to
drinking water supply, wastewater and
stormwater systems
ISO/DIS 24525 Activities relating to drinking water and wastewater services Guidelines for the management of basic on- -site domestic wastewater services Operation and maintenance activities
2021-09-07
60. ISO/TC 228 – Tourism and related services
ISO/DIS 13810 Tourism and related services Visits to industrial tourism organizations and to natural, cultural and historical sites Requirements and recommendations
2021-09-29
61. ISO/TC 229 – Nanotechnologies
ISO/DIS 80004-1 Nanotechnologies Vocabulary Part 1: Core terms and definitions
2021-09-14
62. ISO/TC 249 – Traditional Chinese medicine
ISO/DIS 23964 Traditional Chinese Medicine Saposhnikovia divaricata root and rhizome
2021-09-16
9/2021
www.iss.rs 73
63. ISO/TC 261 – Additive manufacturing
ISO/ASTM DIS 52931 Additive manufacturing of metals Environment, health and safety General principles for use of metallic materials
2021-09-09
64. ISO/TC 267 – Facility management
ISO/DIS 41018 Facility management Development of a facility mana-gement policy
2021-09-14
65. ISO/TC 269/SC 2 – Rolling stock
ISO/DIS 24478 Railway applications Braking Generic vocabulary 2021-09-20
66. ISO/TC 276 – Biotechnology
ISO/DIS 20691 Biotechnology Requirements for data formatting and description in the life sciences
2021-09-21
ISO/DIS 24088-1 Biotechnology Biobanking Requirements for the collection, processing, storage and transportation of microorganisms Part 1: Bacteria and archaea
2021-09-02
ISO/DIS 24603 Biotechnology Biobanking Requirements for human and mouse pluripotent stem cells
2021-09-06
ISO/DIS 24651 Biotechnology Biobanking Requirements for human mesenchymal stromal cells derived from bone marrow
2021-09-09
67. ISO/TC 292 – Security and resilience
ISO/DIS 22379 Security and resilience Guidelines for hosting and organizing citywide or regional events
2021-09-13
68. ISO/TC 296 – Bamboo and rattan
ISO/DIS 21629-2 Bamboo floorings Part 2: Outdoor use 2021-09-28
9/2021
74 www.iss.rs
2021
1. ISO/CASCO – Committee on conformity
assessment
ISO/IEC 17030:2021 Conformity assessment General requirements for third-party marks of conformity
2021-09-09
2. ISO/CASCO – Committee on conformity
assessment
ISO/IEC/IEEE 8802-1AX:2021 Telecommunications and exchange between infor-mation technology systems Requirements for local and metropolitan area networks Part 1AX: Link aggregation
2021-09-13
ISO/IEC/IEEE 8802-1Q:2020/ Amd 2:2021
Telecommunications and exchange between infor-mation technology systems Requirements for local and metropolitan area networks Part 1Q: Bridges and bridged networks Amendment 2: YANG data model
2021-09-13
ISO/IEC/IEEE 8802-1Q:2020/ Amd 3:2021
Telecommunications and exchange between infor-mation technology systems Requirements for local and metropolitan area networks Part 1Q: Bridges and bridged networks Amendment 3: Virtual station interface (VSI) discovery and con-figuration protocol (VDP) extension to support network virtualization overlays over layer 3 (NVO3)
2021-09-13
3. ISO/IEC JTC 1/SC 7 – Software and
systems engineering
ISO/IEC 24773-3:2021 Software and systems engineering Certification of software and systems engineering professionals
Part 3: Systems engineering
2021-09-02
9/2021
www.iss.rs 75
4. ISO/IEC JTC 1/SC 17 – Cards and security devices for personal identification
ISO/IEC 18013-5:2021 Personal identification ISO-compliant driving licence Part 5: Mobile driving licence (mDL) application
2021-09-30
ISO/IEC 18745-2:2021 Test methods for machine readable travel docu-ments (MRTD) and associated devices Part 2: Test methods for the contactless interface
2021-09-16
5. ISO/IEC JTC 1/SC 27 – Information security, cybersecurity and privacy protection
ISO/IEC 18014-2:2021 Information security Time-stamping services Part 2: Mechanisms producing independent tokens
2021-09-09
ISO/IEC 18033-1:2021 Information security Encryption algorithms Part 1: General
2021-09-10
ISO/IEC 27036-1:2021 Cybersecurity Supplier relationships Part 1: Overview and concepts
2021-09-09
ISO/IEC 27551:2021 Information security, cybersecurity and privacy protection Requirements for attribute-based unlinkable entity authentication
2021-09-07
6. ISO/IEC JTC 1/SC 29 – Coding of audio, picture, multimedia and hypermedia information
ISO/IEC 10918-7:2021 Information technology Digital compression and coding of continuous-tone still images Part 7: Reference software
2021-09-15
ISO/IEC 15444-16:2021 Information technology JPEG 2000 image coding system Part 16: Encapsulation of JPEG 2000 images into ISO/IEC 23008-12
2021-09-15
ISO/IEC 23001-10:2020/ Amd 1:2021
Information technology MPEG systems techno-logies Part 10: Carriage of timed metadata metrics of media in ISO base media file format Amendment 1: Support for content-guided trans-coding and spatial relationship of immersive media
2021-09-20
7. ISO/IEC JTC 1/SC 31 – Automatic identifi-cation and data capture techniques
ISO/IEC 22603-1:2021 Information technology Digital representation of product information Part 1: General requirements
2021-09-28
8. ISO/IEC JTC 1/SC 32 – Data management and interchange
ISO/IEC 19075-2:2021 Information technology Guidance for the use of database language SQL Part 2: Time-related information
2021-09-01
9/2021
76 www.iss.rs
ISO/IEC 19075-3:2021 Information technology Guidance for the use of database language SQL Part 3: SQL embedded in programs using the JavaTM programming language
2021-09-01
ISO/IEC 19075-4:2021 Information technology Guidance for the use of database language SQL Part 4: Routines and
2021-09-01
ISO/IEC 19075-5:2021 Information technology Guidance for the use of database language SQL Part 5: Row pattern recognition
2021-09-01
ISO/IEC 19075-6:2021 Information technology Guidance for the use of database language SQL Part 6: Support for JSON
2021-09-01
ISO/IEC 19075-7:2021 Information technology Guidance for the use of database language SQL Part 7: Polymorphic table functions
2021-09-01
ISO/IEC 19075-8:2021 Information technology Guidance for the use of database language SQL Part 8: Multidimensi-onal arrays
2021-09-01
ISO/IEC 19763-16:2021 Information technology Metamodel framework for interoperability (MFI) Part 16: Metamodel for document model registration
2021-09-07
9. ISO/IEC JTC 1/SC 41 – Internet of Things
and related technologies
ISO/IEC 21823-3:2021 Internet of things (IoT) Interoperability for IoT systems Part 3: Semantic interoperability
2021-09-22
10. ISO/PC 325 – Sex toys - Design and safety
requirements for products in direct
contact with genitalia, the anus, or both
ISO 3533:2021 Sex toys Design and safety requirements for products in direct contact with genitalia, the anus, or both
2021-09-24
11. ISO/TC 1 – Screw threads
ISO 965-1:2013/Amd 1:2021 ISO general purpose metric screw threads Tolerances Part 1: Principles and basic data Amendment 1
2021-09-29
12. ISO/TC 4/SC 12 – Ball bearings
ISO 20515:2021 Rolling bearings Radial bearings, retaining slots Dimensions, geometrical product specifications (GPS) and tolerance values
2021-09-22
9/2021
www.iss.rs 77
13. ISO/TC 8/SC 1 – Maritime safety
ISO 24136:2021 Ships and marine technology Pilot ladder winch reels
2021-09-06
14. ISO/TC 8/SC 11 – Intermodal and Short Sea Shipping
ISO 23323:2021 Ships and marine technology Specification for software-based planned maintenance systems
2021-09-17
15. ISO/TC 8/SC 13 – Marine technology
ISO 23446:2021 Marine technology Product water quality of seawater reverse osmosis (RO) desalination Guidelines for municipal water supply
2021-09-29
16. ISO/TC 20/SC 10 – Aerospace fluid systems and components
ISO 8153-2:2021 Aerospace fluid systems and components Vocabulary Part 2: Fittings and couplings
2021-09-02
17. ISO/TC 20/SC 14 – Space systems and operations
ISO 23020:2021 Space systems Determination of test methods to characterize material or component properties required for break-up models used for Earth re-entry
2021-09-15
ISO 23129:2021 Space systems Thermal control coatings for spacecraft Atomic oxygen protective coatings on polyimide film
2021-09-27
ISO 23670:2021 Space systems Vibration testing 2021-09-13
18. ISO/TC 20/SC 16 – Unmanned aircraft systems
ISO 23629-7:2021 UAS traffic management (UTM) Part 7: Data model for spatial data
2021-09-29
19. ISO/TC 22/SC 31 – Data communication
ISO 15765-5:2021 Road vehicles Diagnostic communication over Controller Area Network (DoCAN) Part 5: Speci-fication for an in-vehicle network connected to the diagnostic link connector
2021-09-22
20. ISO/TC 22/SC 33 – Vehicle dynamics and chassis components
ISO 4138:2021 Passenger cars Steady-state circular driving behaviour Open-loop test methods
2021-09-20
9/2021
78 www.iss.rs
21. ISO/TC 22/SC 35 – Lighting and visibility
ISO 13837:2021 Road vehicles Safety glazing materials Method for the determination of solar transmittance
2021-09-28
22. ISO/TC 22/SC 36 – Safety and impact testing
ISO/TS 13396:2021 Road vehicles Sled test method to enable the evaluation of side impact protection of child restraint systems Essential parameters
2021-09-29
23. ISO/TC 22/SC 37 – Electrically propelled vehicles
ISO 23274-2:2021 Hybrid-electric road vehicles Exhaust emissions and fuel consumption measurements Part 2: Externally chargeable vehicles
2021-09-08
24. ISO/TC 22/SC 39 – Ergonomics
ISO 2575:2021 Road vehicles Symbols for controls, indicators and tell-tales
2021-09-07
25. ISO/TC 23/SC 7 – Equipment for harvesting and conservation
ISO 6689:2021 Equipment for harvesting Combine harvesters and functional components Vocabulary
2021-09-03
26. ISO/TC 28 – Petroleum and related products, fuels and lubricants from natural or synthetic sources
ISO 20884:2019/Amd 1:2021 Petroleum products Determination of sulfur content of automotive fuels Wavelength-dispersive X-ray fluorescence spectrometry Amendment 1: Addition of the SSD detector to the Monochromatic excitation part of Table 1
2021-09-28
27. ISO/TC 31 – Tyres, rims and valves
ISO 19447:2021 Passenger car tyres Method for measuring ice grip performance Loaded new tyres
2021-09-17
28. ISO/TC 33 – Refractories
ISO 13765-7:2021 Refractory mortars Part 7: Determination of permanent change in dimensions on heating
2021-09-27
ISO 8840:2021 Refractory materials Determination of bulk density of granular materials (grain density)
2021-09-14
9/2021
www.iss.rs 79
29. ISO/TC 34/SC 5 – Milk and milk products
ISO 23970:2021 Milk, milk products and infant formula Determi-nation of melamine and cyanuric acid by liquid chromatography and tandem mass spectrometry (LC-MS/MS)
2021-09-16
30. ISO/TC 34/SC 6 – Meat, poultry, fish, eggs and their products
ISO 23722:2021 Meat and meat products Vocabulary 2021-09-27
ISO 23781:2021 Operating procedures of pig slaughtering 2021-09-07
ISO 23854:2021 Fermented meat products Specification 2021-09-07
ISO 23855:2021 Frozen surimi Specification 2021-09-08
31. ISO/TC 34/SC 12 – Sensory analysis
ISO 11132:2021 Sensory analysis Methodology Guidelines for the measurement of the performance of a quantitative descriptive sensory panel
2021-09-08
32. ISO/TC 37/SC 2 – Terminology workflow and language coding
ISO 12616-1:2021 Terminology work in support of multilingual communication Part 1: Fundamentals of trans-lation-oriented terminography
2021-09-02
33. ISO/TC 41/SC 1 – Friction
ISO 9982:2021 Belt drives Pulleys and V-ribbed belts for industrial applications PH, PJ, PK, PL and PM profiles: dimensions
2021-09-01
34. ISO/TC 43/SC 1 – Noise
ISO 3381:2021 Railway applications Acoustics Noise measu-rement inside railbound vehicles
2021-09-08
35. ISO/TC 43/SC 2 – Building acoustics
ISO 23591:2021 Acoustic quality criteria for music rehearsal rooms and spaces
2021-09-22
36. ISO/TC 44/SC 10 – Quality management in the field of welding
ISO 13918:2017/Amd 1:2021 Welding Studs and ceramic ferrules for arc stud welding Amendment 1
2021-09-07
9/2021
80 www.iss.rs
ISO 3834-1:2021 Quality requirements for fusion welding of metallic materials Part 1: Criteria for the selection of the appropriate level of quality requirements
2021-09-10
37. ISO/TC 45/SC 1 – Rubber and plastics
hoses and hose assemblies
ISO 13775-1:2021 Thermoplastic tubing and hoses for automotive use Part 1: Non-fuel applications
2021-09-17
ISO 2929:2021 Rubber hoses and hose assemblies for bulk fuel delivery by truck Specification
2021-09-17
38. ISO/TC 45/SC 4 – Products (other
than hoses)
ISO 22941:2021 Rubber sheets for livestock Dairy cattle Specification
2021-09-14
ISO 6450:2021 Rubber- or plastics-coated fabrics Determination of resistance to liquids
2021-09-15
39. ISO/TC 54 – Essential oils
ISO/TS 24106:2021 Essential oils Name harmonization of components 2021-09-09
40. ISO/TC 59/SC 8 – Sealants
ISO 21265:2021 Building and civil engineering sealants Assessment of the fungal growth on sealant surfaces
2021-09-22
41. ISO/TC 67 – Materials, equipment and
offshore structures for petroleum,
petrochemical and natural gas industries
ISO 18797-2:2021 Petroleum, petrochemical and natural gas indu-stries External corrosion protection of risers by coatings and linings Part 2: Maintenance and field repair coatings for riser pipes
2021-09-13
42. ISO/TC 68/SC 8 – Reference data for
financial services
ISO 24165-1:2021 Digital token identifier (DTI) Registration, assignment and structure Part 1: Method for registration and assignment
2021-09-28
ISO 24165-2:2021 Digital token identifier (DTI) Registration, assignment and structure Part 2: Data elements for registration
2021-09-28
9/2021
www.iss.rs 81
43. ISO/TC 69/SC 4 – Applications of statistical methods in product and process management
ISO 7870-4:2021 Control charts Part 4: Cumulative sum charts 2021-09-21
44. ISO/TC 94/SC 14 – Firefighters' personal equipment
ISO 15384:2018/Amd 1:2021 Protective clothing for firefighters Laboratory test methods and performance requirements for wildland firefighting clothing Amendment 1
2021-09-27
45. ISO/TC 106/SC 1 – Filling and restorative materials
ISO 6877:2021 Dentistry Endodontic obturating materials 2021-09-08
46. ISO/TC 107 – Metallic and other inorganic coatings
ISO 14922:2021 Thermal spraying Quality requirements for manufacturers of thermal sprayed coatings
2021-09-22
47. ISO/TC 108/SC 5 – Condition monitoring and diagnostics of machine systems
ISO 18436-6:2021 Condition monitoring and diagnostics of machines Requirements for certification of personnel
Part 6: Acoustic emission
2021-09-15
48. ISO/TC 113/SC 5 – Instruments, equipment and data management
ISO 23350:2021 Hydrometry Catching-type liquid precipitation measuring gauges
2021-09-24
49. ISO/TC 130 – Graphic technology
ISO 12642-3:2021 Graphic technology Input data for characteri-zation of 4-colour process printing Part 3: Extended data set including near neutral scale
2021-09-30
ISO 20616-1:2021 Graphic technology File format for quality control and metadata Part 1: Print requirements eX-change (PRX)
2021-09-30
50. ISO/TC 131/SC 3 – Cylinders
ISO/TS 13725:2021 Hydraulic fluid power Method for evaluating the buckling load of a hydraulic cylinder
2021-09-16
9/2021
82 www.iss.rs
51. ISO/TC 134 – Fertilizers, soil conditioners and beneficial substances
ISO 20620:2021 Fertilizers and soil conditioners Determination of total nitrogen by combustion
2021-09-30
52. ISO/TC 136 – Furniture
ISO 7170:2021 Furniture Storage units Test methods for the determination of strength, durability and stability
2021-09-20
53. ISO/TC 138/SC 2 – Plastics pipes and fittings for water supplies
ISO 15877-3:2009/ Amd 2:2021
Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 3: Fittings Amendment 2
2021-09-28
ISO 9624:2019/Amd 1:2021 Thermoplastics piping systems for fluids under pressure Flange adapters and loose backing flanges Mating dimensions Amendment 1
2021-09-29
54. ISO/TC 142 – Cleaning equipment for air and other gases
ISO 29461-1:2021 Air intake filter systems for rotary machinery Test methods Part 1: Static filter elements
2021-09-15
55. ISO/TC 146/SC 2 – Workplace atmospheres
ISO 24095:2021 Workplace air Guidance for the measurement of respirable crystalline silica
2021-09-13
56. ISO/TC 150 – Implants for surgery
ISO 13179-1:2021 Implants for surgery Coatings on metallic surgical implants Part 1: Plasma-sprayed coatings derived from titanium or titanium-6 aluminum-4 vanadium alloy powders
2021-09-30
57. ISO/TC 150/SC 2 – Cardiovascular implants and extracorporeal systems
ISO/TS 17137:2021 Cardiovascular implants and extracorporeal systems Cardiovascular absorbable implants
2021-09-15
58. ISO/TC 159/SC 5 – Ergonomics of the physical environment
ISO 14505-4:2021 Ergonomics of the thermal environment Evalu-ation of thermal environments in vehicles Part 4: Determination of the equivalent temperature by means of a numerical manikin
2021-09-15
9/2021
www.iss.rs 83
ISO 23456-1:2021 Dynamic signs in physical environments Part 1: General requirements
2021-09-14
59. ISO/TC 163/SC 1 – Test and measurement methods
ISO 23327:2021 Hygrothermal performance of building materials and products Determination of moisture adsorption/desorption properties in response to periodic temperature variation
2021-09-28
60. ISO/TC 172/SC 3 – Optical materials and components
ISO 9211-7:2021 Optics and photonics Optical coatings Part 7: Minimum requirements for neutral beam splitter coatings
2021-09-16
61. ISO/TC 182 – Geotechnics
ISO 22476-4:2021 Geotechnical investigation and testing Field testing Part 4: Prebored pressuremeter test by Ménard procedure
2021-09-01
62. ISO/TC 184 – Automation systems and integration
ISO/IEC TR 63306-2:2021 Smart manufacturing standards map (SM2) Part 2: Catalogue
2021-09-22
63. ISO/TC 184/SC 4 – Industrial data
ISO 10303-59:2021 Industrial automation systems and integration Product data representation and exchange Part 59: Integrated generic resource: Quality of product shape data
2021-09-07
64. ISO/TC 190/SC 3 – Chemical and physical characterization
ISO 11916-3:2021 Soil quality Determination of selected explosives and related compounds Part 3: Method using liquid chromatography-tandem mass spectrometry (LC-MS/MS)
2021-09-17
65. ISO/TC 204 – Intelligent transport systems
ISO/SAE PAS 22736:2021 Taxonomy and definitions for terms related to driving automation systems for on-road motor vehicles
2021-09-01
9/2021
84 www.iss.rs
ISO/TR 4445:2021 Intelligent transport systems Mobility integration Role model of ITS service application in smart
cities
2021-09-06
66. ISO/TC 205 – Building environment design
ISO 11855-2:2021 Building environment design Embedded radiant heating and cooling systems Part 2: Determi-nation of the design heating and cooling capacity
2021-09-15
ISO/TS 23764:2021 Methodology for achieving non-residential zero-energy buildings (ZEBs)
2021-09-24
67. ISO/TC 207/SC 4 – Environmental performance evaluation
ISO 14030-1:2021 Environmental performance evaluation Green debt instruments Part 1: Process for green bonds
2021-09-14
ISO 14030-2:2021 Environmental performance evaluation Green debt instruments Part 2: Process for green loans
2021-09-14
ISO 14030-4:2021 Environmental performance evaluation Green debt instruments Part 4: Verification programme requirements
2021-09-14
68. ISO/TC 213 – Dimensional and geometrical product specifications and verification
ISO 10360-13:2021 Geometrical product specifications (GPS) Accep-tance and reverification tests for coordinate mea-suring systems (CMS) Part 13: Optical 3D CMS
2021-09-09
69. ISO/TC 215 – Health informatics
IEC 80001-1:2021 Safety, effectiveness and security in the implemen-tation and use of connected medical devices or connected health software Part 1: Application of risk management
2021-09-22
70. ISO/TC 216 – Footwear
ISO 19957:2021 Footwear Test methods for heels Heel pin holding strength
2021-09-14
ISO/TR 16178:2021 Footwear Critical substances potentially present in footwear and footwear components Lists of critical chemical substances
2021-09-22
71. ISO/TC 218 – Timber
ISO 24294:2021 Timber Round and sawn timber Vocabulary 2021-09-09
9/2021
www.iss.rs 85
72. ISO/TC 229 – Nanotechnologies
ISO/TS 23151:2021 Nanotechnologies Particle size distribution for cellulose nanocrystals
2021-09-30
73. ISO/TC 262 – Risk management
ISO 31030:2021 Travel risk management Guidance for organi-zations
2021-09-14
74. ISO/TC 269/SC 2 – Rolling stock
ISO 22749-1:2021 Railway applications Suspension components Part 1: Characteristics and test methods for elastomer-mechanical parts
2021-09-28
75. ISO/TC 276 – Biotechnology
ISO 21709:2020/Amd 1:2021 Biotechnology Biobanking Process and quality requirements for establishment, maintenance and characterization of mammalian cell lines Amendment 1
2021-09-08
76. ISO/TC 281 – Fine bubble technology
ISO 20480-3:2021 Fine bubble technology General principles for usage and measurement of fine bubbles Part 3: Methods for generating fine bubbles
2021-09-22
ISO 24261-2:2021 Fine bubble technology Elimination method for sample characterization Part 2: Fine bubble elimination techniques
2021-09-20
77. ISO/TC 301 – Energy management and
energy savings
ISO 50005:2021 Energy management systems Guidelines for a phased implementation
2021-09-14
78. ISO/TC 309 – Governance of organizations
ISO 37000:2021 Governance of organizations Guidance 2021-09-14
9/2021
86 www.iss.rs
(IEC)
2021
,
.
-
2021.
1. TC 14 – Power transformers
IEC 60076-25 ED1 Power transformers Part 25: Neutral grounding resistors
2021-09-17
2. TC 23/SC 23A – Cable management systems
IEC 61537 ED3 Cable management Cable tray systems and cable ladder systems
2021-09-10
IEC 63355 ED1 Cable management systems Test method for content of halogens
2021-09-03
3. TC 34 – Lamps and related equipment
IEC 62386-101 ED3 Digital addressable lighting interface Part 101: General requirements System components
2021-09-17
IEC 62386-102 ED3 Digital addressable lighting interface Part 102: General requirements Control gear
2021-09-17
9/2021
www.iss.rs 87
2021.
IEC 62386-103 ED2 Digital addressable lighting interface Part 103: General requirements Control devices
2021-09-17
4. TC 34/SC 34A – Lamps
IEC 60810/AMD2 ED5 Amendment 2 Lamps, light sources and LED packages for road vehicles Performance requirements
2021-09-03
5. TC 46 – Cables, wires, waveguides, RF connectors, RF and microwave passive components and accessories
IEC 62037-7 ED1 PASSIVE RF AND MICROWAVE DEVICES, INTER-MODULATION LEVEL MEASUREMENT Part 7: Field measurements of passive intermodulation
2021-09-10
IEC 62037-7 ED1 PASSIVE RF AND MICROWAVE DEVICES, INTER-MODULATION LEVEL MEASUREMENT Part 7: Field measurements of passive intermodulation
2021-09-03
IEC 62037-8 ED1 Measurement of passive intermodulation generated by objects exposed to RF radiation
2021-09-10
IEC 62037-8 ED1 Measurement of passive intermodulation generated by objects exposed to RF radiation
2021-09-03
6. TC 46/SC 46A – Coaxial cables
IEC 61196-4 ED4 Coaxial communication cables Part 4: Sectional specification for radiating cables
2021-09-17
IEC 61196-4-1 ED2 Coaxial communication cables Part 4-1: Blank detail specification for radiating cables
2021-09-17
7. TC 46/SC 46F – RF and microwave passive components
IEC 61169-69 ED1 Radio Frequency Connectors Part 69: Sectional speci-fication for series SMP3 RF coaxial connectors
2021-09-10
IEC 61169-69 ED1 Radio Frequency Connectors- Part 69: Sectional speci-fication for series SMP3 RF coaxial connectors
2021-09-03
8. TC 48/SC 48B – Electrical connectors
IEC 63171-4 ED1 Connectors for electrical and electronic equipment Part 4: Detail specification for shielded or unshielded, free and fixed connectors with up to 8 ways Mechanical mating information, pin assignment and additional requirements for Type 4
2021-09-24
9. TC 59/SC 59F – Surface cleaning appliances
IEC/ASTM 62885-6 ED2 Surface cleaning appliances Part 6: Wet hard floor cleaning appliances for household or similar use Methods for measuring the performance
2021-09-24
9/2021
88 www.iss.rs
2021.
10. TC 59/SC 59L – Small household appliances
IEC 61855 ED2 Household and similar use electrical hair care appliances Methods for measuring the performance
2021-09-10
11. TC 62/SC 62B – Diagnostic imaging equipment
IEC 60601-2-54 ED2 Medical electrical equipment Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
2021-09-10
12. TC 62/SC 62D – Electromedical equipment
IEC 80601-2-26/ AMD1 ED1
Amendment 1 Medical electrical equipment Part 2-26: Particular requirements for the basic safety and essential performance of electroencephalograph
2021-09-10
IEC 80601-2-59/ AMD1 ED2
Amendment 1 Medical electrical equipment Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening
2021-09-10
13. TC 65/SC 65B – Measurement and control devices
IEC 63206 ED1 INDUSTRIAL-PROCESS CONTROL SYSTEMS RECORDERS
2021-09-10
14. TC 65/SC 65C – Industrial networks
IEC 61139-2 ED1 Industrial networks Single-drop digital communication interface Part 2: Functional safety extensions
2021-09-03
15. TC 80 – Maritime navigation and radio-communication equipment and systems
IEC 63173-2 ED1 Maritime navigation and radiocommunication equ-ipment and systems Data interface Part 2: Secure communication between ship and shore (SECOM)
2021-09-03
16. TC 82 – Solar photovoltaic energy systems
IEC 61215-1-3/ AMD1 ED2
Amendment 1 Terrestrial photovoltaic (PV) modules Design qualification and type approval Part 1-3:
Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules
2021-09-03
IEC 61215-1-4/ AMD1 ED2
Amendment 1 Terrestrial photovoltaic (PV) modules Design qualification and type approval Part 1-4: Special requirements for testing of thin-film Cu(In,Ga)(S,Se)2 based photovoltaic (PV) modules
2021-09-03
9/2021
www.iss.rs 89
2021.
17. TC 86/SC 86B – Fibre optic interconnecting
devices and passive components
IEC 61300-2-43 ED3 Fibre optic interconnecting devices and passive compo-nents Basic test and measurement procedures Part 2-43: Tests Screen testing of return loss of single-mode PC optical fibre connectors
2021-09-10
IEC 61300-2-5 ED4 Fibre optic interconnecting devices and passive compo-nents Basic test and measurement procedures Part 2-5: Tests Torsion
2021-09-17
IEC 61300-2-5 ED4 Fibre optic interconnecting devices and passive compo-nents Basic test and measurement procedures Part 2-5: Tests Torsion
2021-09-10
IEC 61300-3-35 ED3 Fibre optic interconnecting devices and passive compo-nents Basic test and measurement procedures Part 3-35: Examinations and measurements Visual inspection of fibre optic connectors and fibre-stub transceivers
2021-09-17
IEC 61300-3-35 ED3 Fibre optic interconnecting devices and passive compo-nents Basic test and measurement procedures Part 3-35: Examinations and measurements Visual inspection of fibre optic connectors and fibre-stub transceivers
2021-09-10
IEC 61300-3-4 ED4 Fibre optic interconnecting devices and passive compo-nents Basic test and measurement procedures Part 3-4: Examinations and measurements Attenuation
2021-09-10
18. TC 99 – System engineering and erection of
electrical power installations in systems with
nominal voltages above 1 kV a.c. and 1,5 kV
d.c., particularly concerning safety aspects
IEC 60071-12 ED1 Insulation co-ordination Part 12: Application guidelines for LCC HVDC converter stations
2021-09-24
19. TC 103 – Transmitting equipment for
radiocommunication
IEC 63098-2 ED1 Transmitting and receiving equipment for radiocom-munication Radio-over-fibre technologies and their performance standard Part 2: Radio over fibre based fronthaul network for railway communication system
2021-09-17
20. TC 110 – Electronic display devices
IEC 62629-62-11 ED1 3D display devices Part 62-11: Measurement methods for virtual-image type Optical
2021-09-10
9/2021
90 www.iss.rs
2021.
21. TC 113 – Nanotechnology for electrotechnical
products and systems
ISO 80004-1 ED1 Nanotechnologies Vocabulary Part 1: Core terms and definitions
2021-09-24
ISO 80004-1 ED1 Nanotechnologies Vocabulary Part 1: Core terms and definitions
2021-09-17
22. TC 117 Solar thermal electric plants
IEC 62862-5-2 ED1 Solar thermal electric plants Part 5-2: Systems and components General requirements and test methods for large-size linear Fresnel collectors
2021-09-17
9/2021
www.iss.rs 91
IEC
2021
1. IECEE – IEC Conformity Assessment
for Electrotechnical Equipment and
Components
IECEE TRF 60320-2-1A:2021 This Test Report Form applies to: IEC 60320-2-1:2018 in conjunction with IEC 60320-1:2015, IEC 60320-1:2015/AMD1:2018
2021-09-24
IECEE TRF 60335-2-24M:2021 This Test Report Form applies to: IEC 60335-2-65:2002, IEC 60335-2-65:2002/AMD1:2008, IEC 60335-2-65:2002/AMD2:2015 in conjunction with IEC 60335-1:2010, IEC 60335-1:2010/ /AMD1:2013, IEC 60335-1:2010/AMD2:2016
2021-09-30
IECEE TRF 60335-2-28J:2021 This Test Report Form applies to: IEC 60335-2-28:2002, IEC 60335-2-28:2002/AMD1:2008 used in conjunction with IEC 60335-1:2010
2021-09-30
IECEE TRF 60335-2-34K:2021 This Test Report Form applies to: IEC 60335-2-34:2021 in conjunction with IEC 60335-1:2010, IEC 60335-1:2010/AMD1:2013, IEC 60335-1:2010/ /AMD2:2016
2021-09-24
IECEE TRF 60335-2-40T:2021 This Test Report Form applies to: IEC 60335-2-40:2018 in conjunction with IEC 60335-1:2010, IEC 60335-1:2010/AMD1:2013, IEC 60335-1:2010/ /AMD2:2016
2021-09-03
IECEE TRF 60335-2-44I:2021 This Test Report Form applies to: IEC 60335-2-44:2002, IEC 60335-2-44:2002/AMD1:2008, IEC 60335-2-44:2002/AMD2:2011 in conjunction with IEC 60335-1:2010
2021-09-30
IECEE TRF 60335-2-78H:2021 This Test Report Form applies to: IEC 60335-2-78:2002, IEC 60335-2-78:2002/AMD1:2008, IEC 60335-2-78:2002/AMD2:2019 in conjunction with IEC 60335-1:2010, IEC 60335-1:2010/AMD1:2013, IEC 60335-1:2010/AMD2:2016
2021-09-30
9/2021
92 www.iss.rs
IECEE TRF 60335-2-81F:2021 This Test Report Form applies to: IEC 60335-2-81:2015, IEC 60335-2-81:2015/AMD1:2017, IEC 60335-2-81:2015/AMD2:2020 in conjunction with IEC 60335-1:2010, IEC 60335-1:2010/AMD1:2013, IEC 60335-1:2010/AMD2:2016
2021-09-24
IECEE TRF 60335-2-82G:2021 This Test Report Form applies to: IEC 60335-2-82:2002, IEC 60335-2-82:2002/AMD1:2008, IEC 60335-2-82:2002/AMD2:2015 for use in conjunction with IEC 60335-1:2010, IEC 60335-1:2010/ /AMD1:2013, IEC 60335-1:2010/AMD2:2016
2021-09-30
IECEE TRF 60598-2-11E:2021 This Test Report Form applies to: IEC 60598-2-11:2013 used in conjunction with IEC 60598-1:2020
2021-09-14
IECEE TRF 60598-2-21C:2021 This Test Report Form applies to: IEC 60598-2-21:2014 used in conjunction with IEC 60598-1:2014, IEC 60598-1:2014/AMD1:2017
2021-09-16
IECEE TRF 60598-2-21D:2021 This Test Report Form applies to: IEC 60598-2-21:2014 used in conjunction with IEC 60598-1:2020
2021-09-16
IECEE TRF 60598-2-24H:2021 This Test Report Form applies to: IEC 60598-2-24:2013 used in conjunction with IEC 60598-1:2020
2021-09-24
IECEE TRF 60601-1-11G:2021 This Test Report Form applies to: IEC 60601-1-11:2015, IEC 60601-1-11:2015/AMD1:2020 for use in conjunction with IEC 60601-1:2005, IEC 60601-1:2005/AMD1:2012, IEC 60601-1:2005/AMD2:2020
2021-09-16
IECEE TRF 60601-2-2H:2021 This Test Report Form applies to: IEC 60601-2-2:2017 for use in conjunction with IEC 60601-1:2005, IEC 60601-1:2005/AMD1:2012
2021-09-03
IECEE TRF 60745-2-7C:2021 This Test Report Form applies to: IEC 60745-2-7:1989 used in conjunction with IEC 60745-1:1982
2021-09-28
IECEE TRF 60947-4-3D:2021 This Test Report Form applies to: IEC 60947-4-3:2020 2021-09-28
IECEE TRF 61029-1C:2021 This Test Report Form applies to: IEC 61029-1:1990 2021-09-28
IECEE TRF 61029-2-11C:2021 This Test Report Form applies to: IEC 61029-2-11:2001
2021-09-28
IECEE TRF 61029-2-3B:2021 This Test Report Form applies to: IEC 61029-2-3:1993, IEC 61029-2-3:1993/AMD1:2001 in con-junction with IEC 61029-1:1990
2021-09-17
IECEE TRF 61029-2-5D:2021 This Test Report Form applies to: IEC 61029-2-5:1993, IEC 61029-2-5:1993/AMD1:2001 in con-junction with IEC 61029-1:1990
2021-09-28
IECEE TRF 61029-2-7C:2021 This Test Report Form applies to: IEC 61029-2-7:1993 used in conjunction with IEC 61029-1:1990
2021-09-28
IECEE TRF 61558-2-16H:2021 This Test Report Form applies to: IEC 61558-2-16:2021 in conjunction with IEC 61558-1:2017
2021-09-17
IECEE TRF 61558-2-4E:2021 This Test Report Form applies to: IEC 61558-2-4:2021 in conjunction with IEC 61558-1:2017
2021-09-30
9/2021
www.iss.rs 93
IECEE TRF 62841-2-6A:2021 This Test Report Form applies to: IEC 62841-2-6:2020 for use in conjunction with IEC 62841-1:2014
2021-09-20
IECEE TRF 63044-5-1A:2021 This Test Report Form applies to: IEC 63044-5-1:2017
2021-09-20
2. ISO/CASCO – Committee on conformity assessment
ISO/IEC 17030:2021 Conformity assessment General requirements for third-party marks of conformity
2021-09-09
3. ISO/IEC JTC 1/SC 6 – Telecommunications and information exchange between systems
ISO/IEC/IEEE 8802-1AX:2021 Telecommunications and exchange between infor-mation technology systems Requirements for local and metropolitan area networks Part 1AX: Link aggregation
2021-09-13
ISO/IEC/IEEE 8802-1Q:2020/ AMD2:2021
Amendment 2 Telecommunications and exchange between information technology systems Requ-irements for local and metropolitan area networks
Part 1Q: Bridges and bridged networks YANG data model
2021-09-13
ISO/IEC/IEEE 8802-1Q:2020/ AMD3:2021
Amendment 3 Telecommunications and exchange between information technology systems Requ-irements for local and metropolitan area networks
Part 1Q: Bridges and bridged networks Virtual station interface (VSI) discovery and configuration protocol (VDP) extension to support network virtualization overlays over layer 3 (NVO3)
2021-09-13
4. ISO/IEC JTC 1/SC 7 – Software and systems engineering
ISO/IEC 24773-3:2021 Software and systems engineering Certification of software and systems engineering professionals
Part 3: Systems engineering
2021-09-02
5. ISO/IEC JTC 1/SC 17 – Cards and personal identification
ISO/IEC 18013-5:2021 Personal identification ISO-compliant driving licence Part 5: Mobile driving licence (mDL) application
2021-09-30
ISO/IEC 18745-2:2021 Test methods for machine readable travel docu-ments (MRTD) and associated devices Part 2: Test methods for the contactless interface
2021-09-16
9/2021
94 www.iss.rs
6. ISO/IEC JTC 1/SC 27 – IT security techniques
ISO/IEC 18014-2:2021 Information security Time-stamping services Part 2: Mechanisms producing independent tokens
2021-09-09
ISO/IEC 18033-1:2021 Information security Encryption algorithms Part 1: General
2021-09-10
ISO/IEC 27036-1:2021 Cybersecurity Supplier relationships Part 1: Overview and concepts
2021-09-09
ISO/IEC 27551:2021 Information security, cybersecurity and privacy protection Requirements for attribute-based unlinkable entity authentication
2021-09-07
7. ISO/IEC JTC 1/SC 29 – Coding of audio, picture, multimedia and hypermedia information
ISO/IEC 10918-7:2021 Information technology Digital compression and coding of continuous-tone still images Part 7: Reference software
2021-09-15
ISO/IEC 15444-16:2021 Information technology JPEG 2000 image coding system Part 16: Encapsulation of JPEG 2000 images into ISO/IEC 23008-12
2021-09-15
ISO/IEC 23001-10:2020/ AMD1:2021
Amendment 1 Information technology MPEG systems technologies Part 10: Carriage of timed metadata metrics of media in ISO base media file format Support for content-guided transcoding and spatial relationship of immersive media
2021-09-20
8. ISO/IEC JTC 1/SC 31 – Automatic identifi-cation and data capture techniques
ISO/IEC 22603-1:2021 Information technology Digital representation of product information Part 1: General requirements
2021-09-28
9. ISO/IEC JTC 1/SC 32 – Data management and interchange
ISO/IEC 19075-2:2021 Information technology Guidance for the use of database language SQL Part 2: Time-related information
2021-09-01
ISO/IEC 19075-3:2021 Information technology Guidance for the use of database language SQL Part 3: SQL embedded in
2021-09-01
ISO/IEC 19075-4:2021 Information technology Guidance for the use of database language SQL Part 4: Routines and
2021-09-01
9/2021
www.iss.rs 95
ISO/IEC 19075-5:2021 Information technology Guidance for the use of database language SQL Part 5: Row pattern recognition
2021-09-01
ISO/IEC 19075-6:2021 Information technology Guidance for the use of database language SQL Part 6: Support for JSON
2021-09-01
ISO/IEC 19075-7:2021 Information technology Guidance for the use of database language SQL Part 7: Polymorphic table functions
2021-09-01
ISO/IEC 19075-8:2021 Information technology Guidance for the use of database language SQL Part 8: Multidimensional arrays
2021-09-01
ISO/IEC 19763-16:2021 Information technology Metamodel framework for interoperability (MFI) Part 16: Metamodel for document model registration
2021-09-07
10. ISO/IEC JTC 1/SC 41 – Internet of Things and related technologies
ISO/IEC 21823-3:2021 Internet of Things (IoT) Interoperability for IoT systems Part 3: Semantic interoperability
2021-09-21
11. SyC SM – Smart Manufacturing
ISO/IEC TR 63306-2:2021 Smart manufacturing standards map (SM2) Part 2: Catalogue
2021-09-21
12. TA 20 – Analogue and digital audio
IEC 60958-1:2021 Digital audio interface Part 1: General 2021-09-01
IEC 60958-1:2021 RLV Digital audio interface Part 1: General 2021-09-01
IEC 60958-3:2021 Digital audio interface Part 3: Consumer applications
2021-09-02
IEC 60958-3:2021 RLV Digital audio interface Part 3: Consumer applications
2021-09-02
13. TC 1 – Terminology
IEC 60050-103:2009/ AMD4:2021
Amendment 4 International Electrotechnical Vocabulary (IEV) Part 103: Mathematics Functions
2021-09-03
IEC 60050-131:2002/ AMD5:2021
Amendment 5 International Electrotechnical Vocabulary (IEV) Part 131: Circuit theory
2021-09-03
IEC 60050-466:1990/ AMD3:2021
Amendment 3 International Electrotechnical Vocabulary (IEV) Part 466: Overhead lines
2021-09-03
IEC 60050-705:1995/ AMD7:2021
Amendment 7 International Electrotechnical Voca-bulary (IEV) Part 705: Radio wave propagation
2021-09-03
9/2021
96 www.iss.rs
IEC 60050-715:1996/ AMD3:2021
Amendment 3 International Electrotechnical Vocabulary (IEV) Part 715: Telecommunication networks, teletraffic and operation
2021-09-03
IEC 60050-721:1991/ AMD5:2021
Amendment 5 International Electrotechnical Vocabulary (IEV) Part 721: Telegraphy, facsimile and data communication
2021-09-03
IEC 60050-723:1997/ AMD7:2021
Amendment 7 International Electrotechnical Vocabulary (IEV) Part 723: Broadcasting: Sound, television, data
2021-09-03
IEC 60050-726:1982/ AMD7:2021
Amendment 7 International Electrotechnical Vocabulary (IEV) Part 726: Transmission lines and waveguides
2021-09-03
IEC 60050-801:1994/ AMD4:2021
Amendment 4 International Electrotechnical Vocabulary (IEV) Part 801: Acoustics and electroacoustics
2021-09-03
IEC 60050-811:2017/ AMD1:2021
Amendment 1: International Electrotechnical Vocabulary (IEV) Part 811: Electric traction
2021-09-03
14. TC 8/SC 8A – Grid Integration of Renewable Energy Generation
IEC TS 63102:2021 Grid code compliance assessment methods for grid connection of wind and PV power plants
2021-09-03
15. TC 22/SC 22F – Power electronics for electrical transmission and distribution systems
IEC 60700-1:2015/AMD1:2021 Amendment 1 Thyristor valves for high voltage direct current (HVDC) power transmission Part 1: Electrical testing
2021-09-15
IEC 60700-1:2015 + AMD1:2021 CSV
Thyristor valves for high voltage direct current (HVDC) power transmission Part 1: Electrical testing
2021-09-15
IEC TR 62001-4:2021 High-voltage direct current (HVDC) systems Gui-dance to the specification and design evaluation of AC filters Part 4: Equipment
2021-09-07
IEC TR 62001-4:2021 RLV High-voltage direct current (HVDC) systems Guidance to the specification and design evaluation of AC filters Part 4: Equipment
2021-09-07
16. TC 33 – Power capacitors and their applications
IEC 60143-2:2012/AMD1:2021 Amendment 1 Series capacitors for power systems Part 2: Protective equipment for series capacitor banks
2021-09-02
9/2021
www.iss.rs 97
IEC 60143-2:2012 + AMD1:2021 CSV
Series capacitors for power systems Part 2: Protective equipment for series capacitor banks
2021-09-02
17. TC 35 – Primary cells and batteries
IEC 60086-5:2021 Primary batteries Part 5: Safety of batteries with aqueous electrolyte
2021-09-30
IEC 60086-5:2021 RLV Primary batteries Part 5: Safety of batteries with aqueous electrolyte
2021-09-30
18. TC 38 – Instrument transformers
IEC 61869-11:2017/ISH1:2021 Interpretation sheet 1 Instrument transformers Part 11: Additional requirements for low-power passive voltage transformers
2021-09-15
19. TC 44 – Safety of machinery – Electro-technical aspects
IEC 60204:2021 SER Safety of machinery Electrical equipment of machines ALL PARTS
2021-09-15
IEC 60204-1:2016/ AMD1:2021
Amendment 1 Safety of machinery Electrical equipment of machines Part 1: General requ-irements
2021-09-15
IEC 60204-1:2016 + AMD1:2021 CSV
Safety of machinery Electrical equipment of machines Part 1: General requirements
2021-09-15
20. TC 47 – Semiconductor devices
IEC 63244-1:2021 Semiconductor devices Semiconductor devices for wireless power transfer and charging Part 1: General requirements and specifications
2021-09-14
21. TC 47/SC 47F – Micro-electromechanical systems
IEC 62047-40:2021 Semiconductor devices Micro-electromechanical devices Part 40: Test methods of micro-electro-mechanical inertial shock switch threshold
2021-09-03
22. TC 49 – Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection
IEC 60444-6:2021 Measurement of quartz crystal unit parameters Part 6: Measurement of drive level dependence (DLD)
2021-09-01
9/2021
98 www.iss.rs
IEC 60444-6:2021 RLV Measurement of quartz crystal unit parameters Part 6: Measurement of drive level dependence (DLD)
2021-09-01
IEC 63041-1:2021 Piezoelectric sensors Part 1: Generic specifications 2021-09-17
IEC 63041-1:2021 RLV Piezoelectric sensors Part 1: Generic specifications 2021-09-17
23. TC 61 – Safety of household and similar
electrical appliances
IEC 60335-2-74:2021 Household and similar electrical appliances Safety Part 2-74: Particular requirements for portable immersion heaters
2021-09-03
IEC 60335-2-74:2021 RLV Household and similar electrical appliances Safety Part 2-74: Particular requirements for portable immersion heaters
2021-09-03
24. TC 62/SC 62A – Common aspects of
electrical equipment used in medical
practice
IEC 80001-1:2021 Application of risk management for IT-networks incorporating medical devices Part 1: Safety, effectiveness and security in the implementation and use of connected medical devices or connected health software
2021-09-21
25. TC 62/SC 62D – Electromedical equipment
IEC 60601-2-41:2021 Medical electrical equipment Part 2-41: Particular requirements for the basic safety and essential performance of surgical luminaires and luminaires for diagnosis
2021-09-03
26. TC 69 – Electric road vehicles and electric
industrial trucks
IEC PAS 62840-3:2021 Electric vehicle battery swap system Part 3: Particular safety and interoperability requirements for battery swap systems operating with removable RESS/battery systems
2021-09-27
27. TC 70 – Degrees of protection provided
by enclosures
IEC 62262:2002/AMD1:2021 Amendment 1 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
2021-09-03
9/2021
www.iss.rs 99
IEC 62262:2002 + AMD1:2021 CSV
Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
2021-09-03
28. TC 82 – Solar photovoltaic energy
systems
IEC TS 63163:2021 Terrestrial photovoltaic (PV) modules for consumer products Design qualification and type approval
2021-09-14
29. TC 85 – Measuring equipment for electrical
and electromagnetic quantities
IEC 60688:2021 Electrical measuring transducers for converting AC and DC electrical quantities to analogue or digital signals
2021-09-16
IEC 60688:2021 RLV Electrical measuring transducers for converting AC and DC electrical quantities to analogue or digital signals
2021-09-16
IEC 62586-2:2017/AMD1:2021 Amendment 1 Power quality measurement in power supply systems Part 2: Functional tests and uncertainty requirements
2021-09-15
IEC 62586-2:2017 + AMD1:2021 CSV
Power quality measurement in power supply systems Part 2: Functional tests and uncertainty requirements
2021-09-15
30. TC 86/SC 86A – Fibres and cables
IEC TR 62000:2021 Guidelines for combining different single-mode fibre sub-categories
2021-09-03
IEC TR 62000:2021 RLV Guidelines for combining different single-mode fibre sub-categories
2021-09-03
31. TC 86/SC 86B – Fibre optic interconnecting
devices and passive components
IEC 61753-101-03:2021 Fibre optic interconnecting devices and passive components performance standard Part 101-03: Fibre management systems for category OP Outdoor protected environment
2021-09-27
IEC 61753-111-07:2021 Fibre optic interconnecting devices and passive components Performance standard Part 111-07: Sealed closures Category A Aerial
2021-09-03
IEC 61753-111-09:2021 Fibre optic interconnecting devices and passive components Performance standard Part 111-09: Sealed closures Category S Subterranean
2021-09-14
9/2021
100 www.iss.rs
32. TC 91 – Electronics assembly technology
IEC 61189-2-807:2021 Test methods for electrical materials, printed boards and other interconnection structures and assemblies
Part 2-807: Test methods for materials for interconnection structures Decomposition temperature (T<sub>d</sub>) using TGA
2021-09-03
33. TC 100 – Audio, video and multimedia systems and equipment
IEC 60958:2021 SER Digital audio interface ALL PARTS 2021-09-02
34. TC 104 – Environmental conditions, classification and methods of test
IEC 60068-3-3:2019/ COR1:2021
Corrigendum 1 Environmental testing Part 3-3: Supporting documentation and guidance Seismic test methods for equipment
2021-09-29
35. TC 110 – Electronic display devices
IEC 62629-1-2:2021 3D display devices Part 1-2: Generic Termino-logy and letter symbols
2021-09-17
IEC 62629-1-2:2021 RLV 3D display devices Part 1-2: Generic Termino-logy and letter symbols
2021-09-17
36. TC 111 – Environmental standardization for electrical and electronic products and systems
IEC 62321-3-3:2021 Determination of certain substances in electro-technical products Part 3-3: Screening Poly-brominated biphenyls, polybrominated diphenyl ethers and phthalates in polymers by gas chromato-graphy-mass spectrometry using a pyrolyser/thermal desorption accessory (Py/TD-GC-MS)
2021-09-14
37. TC 119 – Printed Electronics
IEC TR 62899-402-4:2021 Printed electronics Part 402-4: Printability Measurement of qualities Classification and measurement methods for morphology
2021-09-21
38. TC 120 – Electrical Energy Storage (EES) Systems
IEC TR 62933-2-200:2021 Electrical energy storage (EES) systems Part 2-200: Unit parameters and testing methods Case study of electrical energy storage (EES) systems located in EV charging station with PV
2021-09-03
85+ГОДИНА СА ВАМА!
ISSN 0353–8524
ИНСТИТУТ ЗА СТАНДАРДИЗАЦИЈУ СРБИЈЕ
Београд, Стевана Бракуса 2, поштански фах бр. 2105
Телефон: (011) 75-41-256
Телефакс: (011) 75-41-257
www.iss.rs
ИНФОРМАЦИОНИ ЦЕНТАР
Телефон: (011) 34-09-310
ПРОДАЈА
Телефон: (011) 34-09-385