380-PRESSCONTROL-cg.pdf

download 380-PRESSCONTROL-cg.pdf

of 1

Transcript of 380-PRESSCONTROL-cg.pdf

  • 3

    Reguladores de presin

    PRINCIPIO DE FUNCIONAMIENTOLa diferencia fundamental del regulador de presin respecto al sistema tradicional de acumulador hidroneumtico, es que el regulador de presin mantiene conectada la bomba mientras exista un consumo en la red, garantizando asi, una presin constante en funcin del caudal solicitado. Por el contrario, en el sistema tradicional, la presin vara constantemente en funcin del volumen de agua acumulada en el depsito hidroneumtico.

    VENTAJAS DEL REGULADOR DE PRESIN Presin constante (en funcin del caudal solicitado). Sustituye: Hasabox, Presostato, Racord 5 vas e interruptor de nivel. Sistema de proteccin de bomba cuando falta la alimentacin del agua. No utiliza colchn de aire. Pulsador para accionamiento manual. Vlvula de retencin incorporada. Dimensiones reducidas de todo el grupo. Funcionamiento totalmente silencioso. No necesita regulacin ni mantenimiento.

    * Muy importante: Es imprescindible el empleo de vlvula de pie o retencin en la aspiracin de la bomba. Asmismo se aconseja la instalacin de una vlvula de cierre en la impulsin.Si la columna de agua entre la bomba y el suministro ms alto es superior a 15 m, el regulador no puede ser montado directamente sobre la bomba, debe ser intercalado en la tubera.

    Bajo demanda se puede modificar la presin de arranque, la tensin de alimentacin (12-24-230 V.) y la membrana para utilizar el regulador en trasvases de gas-oil.Starting-up pressure, feeding power (12-24-220 v.) and the diaphragm for using the regulator in gas-oil transfers can be modified upon request.

    PRESSCONTROLPRESSCONTROL mini(ECOPRESS)

    CONTROLPRES

    OPERATION PRINCIPLEThe main difference for the pressure regulator regarding traditional systems of hydropneumatic accumulators, is that the pressure regulator keeps the pump connected while power supply consumption exists, assuring constant pressure according to the requested flow. On the other hand, in the traditional system, pressure constantly varies according to accumulated water volume in the hydropneumatic tank.

    PRESSURE REGULATOR ADVANTAGES Constant pressure (according to requested flow). Replaces: Hasabox, Pressostat, 5-way union and level switch. Pump protection system when water feeding is missing. Air-cushion is not used.Push-button for manual drive. Built-in retention valve.Reduced dimensions in all the unit. Completely silent operation. Adjustment and maintenance is not needed .

    * Very important: Stand or retention valve for the pump suction is required. Likewise, the installation of a closing valve for impulse is recommended. .If the water column between the pump and the highest supply is over 15 m, the regulator can not be directly mounted on the pump, it should be inserted into the pipe..

    ModeloModel

    Modle

    Tensin Voltage

    (V)

    I max. (A)

    ProteccinProtection

    T max./ min.(C)

    Caudal max.Max. FlowDbit max.

    (l/h)

    Presin arranqueStart pressure

    Pres. dmarrage(kg/cm)

    Presin paroStop pressurePression arrt

    (kg/cm)

    Presin mx. Max. pressurePression max.

    (kg/cm)

    Potencia mx.Max. power

    HomologacinAgreement

    Homologation

    PRESSCONTROL mini (ECOPRESS)

    230 6 IP-65 60 - 0 7000 0,8 Mximo de la bomba 10 1 CV 1 M CE

    PRESSCONTROL 230 8 IP-65 60 - 0 7000 1,5 Mximo de la bomba 10 1,5 CV 1 M CE - VDE

    MASCONTROL 230 16 IP-65 60 - 0 10000 1,5 Mximo de la bomba 10 3 CV 1 M CE - VDE

    MASCONTROL 24 V.

    24 Vcc 20 IP-65 60 - 0 7000 1,5 Mximo de la bomba 10 1 CV 1 M CE - VDE

    CONTROLPRES REGULABLE

    230 16 IP-65 60 - 0 10000 1,5 Regulable 10 3 CV 1 M CE - VDE

    RP-90 230 10 IP-54 60 - 0 7000 1,5 Mximo de la bomba 6 1 CV 1 M -