4- Burris, Val - La Síntesis Neomarxista de Marx y Weber Sobre Las Clases
Burris BTH User Manual FINAL - bbi.es
Transcript of Burris BTH User Manual FINAL - bbi.es
MANUAL DE USUARIOBTH 25 / BTH 35 / BTH 50
BURRISTHERMAL
H A N D H E L D
1
Felicitaciones por su compra de una cámara termográfica Burris de mano. Revise este manual detenidamente antes de usarla y manténgalo disponible para futuras consultas. Esta guía explica el funcionamiento de los modelos BTH 25, BTH 35 y BTH 50.
MEDIDAS DE PRECAUCIÓN
1. No exponga directamente la cámara termográfica a fuentes de luz de alta intensidad como el sol, láseres de dióxido de carbono y máquinas de soldar eléctricas.
2. La cámara termográfica combina instrumentos ópticos de precisión y componentes electrónicos sensibles a la electrostática. Cualquier abuso de la cámara termográfica y sus accesorios puede comprometer el rendimiento y la longevidad y anular la garantía.
CARACTERÍSTICAS DE LA CÁMARA TERMOGRÁFICA
ANILLO DE ENFOQUE
BOTÓN FOTO/VIDEO
PERILLA DE DIOP-TRÍAS
BOTÓN DE ABAJO
BOTÓN DE MENÚ
BOTÓN DE ARRIBA
BOTÓN DE ENCENDIDO
INDICADORENERGÍA
PIEZA VISUAL
INDICADOR DE
CARGADO
PUERTOS USB /TIPE C/ MICRO HDMI
2
Congratulations on your purchase of a BurrisThermal Hand Held Sight. Review this manualthoroughly before using and keep it availablefor future reference. This guide explains theoperation of the BTH 25, BTH 35 and BTH 50 models.
CAUTIONS1. Do not directly expose the thermal imager to high intensity light sources such as the sun, carbon dioxide lasers and electric welding machines.2. The thermal imager combines precision optical instruments and electrostatically sensitive electronics, any abuse of the thermal imager and its accessories can compromise performance and longevity and may void the warranty.
THERMAL SIGHT FEATURES
MODELO
ESPECIFICACIONES TÉCNICAS
BURRIS THERMAL HAND HELD
Detector25mm 35mm 50mm
Resolución 400×300tamaño de pixel 17µm
Propiedades ópticasLongitud focal 25mm F1.2 35mm F1.2 50mm F1.2
Enfoque Manual FocusÁngulo visual 15.4×11.6 11.1×8.3 7.8×5.8
ImagenVelocidad de cuadro 50Hz
Zoom Digital 1×—4×Pantalla
Monitor 1280×960 color LCOSVisibilidad de regul. -4~+2Magnificación de máqu. 1.7—6.8× 2.3—9.2× 3.3—13.2×
EnergíaAdaptador Adaptador especial de cargado 5V DC
Horas de funcion. ≥5 horas @25°C
Interface
USB TYPE C, para cargado / transferencia de archivos
Interfáz de Video Micro HDMI
Conexión Externa Riel Picatinny
POWERINDICATOR
MODELO
FUNCIÓN DEL PRODUCTO
BURRIS THERMAL HAND HELD25mm 35mm 50mm
Foto SI
Video SI
Brillo de la pantala 1~10 niveles
Brillo de la imagen 1~10 niveles
Contraste imagen 1~10 niveles
Modo de escena Mejorado/Resaltado/Natural
Súper ahorro energía SI
Seguimiento calor SI
Zoom suave SI
WIFI SI
Mejoramiento de img SI
Paletas de color Blanco vivo/Negro vivo/Rojo vivo/Hierro/Azul vivo
3
MODELO
FUNCIÓN DE PRODUCTO
BURRIS THERMAL HAND HELD25mm 35mm 50mm
Indicación de carga Ajustable
Modelo de calibración Automático/Escena/Disparador
Auto apagado
Auto espera SI
Ajustes de tiempo SI
Ajustes de marca SI
Restaurar por defecto SI
Indicación trabajo Ajustable
TelémetroSI
Configurac. idioma English/Russian/German/French/Chinese
PIP SI
SI
Formateo de tarjeta de memoria
SI
BOTÓN DE FUNCIÓN
BOTÓN ESTADOS DE
DISPOSITIVO ACTUALPRES. BREVE PRES. LARGA
Botón de encendido
Auto apagado / Encendido
Alejamiento
Encendido Calibración Pant. apag Apagado
Pantalla apagada Pantalla encendida /
Botón arriba
No muestra en barra de
menú
Cambia a modo escena Acercamiento
Muestra en la barra de
menú
Opciones hacia arriba/
Cambia valor parámetros
Botón de menú M
No muestra en la barra de
menú
Muestra en la barra de
menú
Entra al menú de atajos
Entra al menú
principal
Entra al sub-menúSelecciona oción
de valor de parámetro
Sale de la barra de menú / regresa al
menú anterior
Botón abajo
No muestra en la barra de
menú
Muestra en la barra de
menú
Cambia al modo de
paletas de color
Opciones hacia abajo
Cambia el valor del
parámetro
/
4
ATAJOS DE MENÚ• Presione el botón M para ingresar al menú de
acceso directo• Presione el botón Arriba / Abajo para cambiar
entre PIP, Pantalla BRI, telémetro estadístico,pista activa y modos de ahorro de energía
Picture in Picture (PIP)
• Con la ventana PIP abierta, seleccione la izquierda / medio / derecha para colocación
• La imagen de la ventana es un aumento de 2X de la imagen principal
Brillo de la Pantalla• Los niveles de brillo se pueden ajustar de 10 a100 por ciento.
Buscador de rango estadísticoEl telémetro estadístico métrico le permite estimar
la distancia de un objetivo. Hay tres estadios disponibles en el dispositivo: Conejo (35 cm / 13,7 pulg.), Jabalí (90 cm / 35,4 pulg.),Venado (150 cm / 59 pulg.). Cómo utilizar los estadios:
• Alinee la línea horizontal inferior con la parte inferior de la imagen de destino, presione el botón Arriba / Abajo para cambiar el ancho entre las líneas horizontales superior e inferior hasta que la línea horizontal superior esté alineada con la parte superior del icono de destino
• La distancia ahora se puede calcular ymostrar automáticamente
• Al comparar el tamaño del objetivo con los tres tamaños de animales de referencia, el usuario puede calcular aproximadamente la distancia del objetivo
Hot Track• When hot track is turned on, the active crosshair tracks the point with the highest temperature in the scene
Super Energy-Saving Mode• In the super energy-saving mode, screen bright- ness is reduced to 30 percent and the WiFi is turned off• When the Super energy-saving mode is off, the screen brightness and WiFi are restored to their original state
NOTE - If WiFi cannot be turned on, please check if the super energy-saving mode is off.
MAIN MENU• Press and hold the M button to enter the main menu• Press the Up/Down button to switch between Image quality adjustment, Calibration mode, WiFi, power saving settings, indication settings, general settings and other settings
Image Quality Adjustment• Image enhancement - When the image enhance- ment is turned on, the image of the target can be enhanced• Scene mode - Image brightness and contrast can be adjusted for each scene mode to achieve the best image
Color Palettes• White hot - The objects with higher temperature show in white or light gray• Black hot - The objects with higher temperature show in black or dark gray• Red hot - The objects with higher temperature show in red• Adjustable red hot - The objects with higher temperature show in red. Users can adjust the intensity of range of red heat from level 1 to 10
• Iron - The objects with higher temperature show in iron red• Blue hot - The objects with lowest temperature show in blue or dark blue, and the object with higher temperature shows in red
Brightness• Adjustable from level 1 to 10 level
Contrast• Adjustable from level 1 to 10 level
Calibration Mode• Automatic - The device automatically corrects the image quality without any action• Scene - The user manually corrects the image quality as needed. For manual correction, the lens cover needs to be attached before calibration• Shutter - The user manually corrects the image quality as needed and the device shutter closes for calibration.
WiFiIt can be connected to the mobile phone via WiFi and the thermal imager can be operated remotely via the mobile phone APP. When WiFi is turned on, but not connected, the WiFi icon flashes and the WiFi name is displayed at the top of the screen. When the WiFi is connected, the WiFi icon is always on• Mobile phone APP - Search and download 'Burris Thermal' APP in the mobile phone app market. Open the app, and find the WiFi name of “Burris BTH” in your mobile phone WiFi settings, enter the password '12345678', then after the connection is successful, the user can operate remotely• Android - Please search and download in Google play• IOS - Please search and download in the APP store
Power Saving Settings• Auto Stand-By - If there is no operation in the setting time, it enters Stand-by mode. If the work indicator is on before entering Standby mode, the work indicator will flash in Stand-by mode• Auto Power - If there is no operation in the setting time, it will power off automaticallyNote - Auto Stand-by and Auto power-off cannot be performed while WiFi is connected.
Indication Settings• Charging indication - In the charging state, you can turn the charging indicator on or off• Working indication - In the normal working state, you can turn the working indicator on or off
General Settings• Time style - Select 12-hour or 24-hour style• Date style - Choose different date styles according to your preference• Time setup - Adjust the current date and time
Watermark Settings• Users can choose the display style of date and time watermark on the screen
Language Settings• Language choices include English/Russian/ German/French/Chinese.
Memory Card Formatting• Allows the use to format and empty onboard storage
Restore Default• This function restores the factory settings.
Other Settings (optional accessories feature settings)• Ranging• Ranging adjustment• Pointer
• Pointer adjustmentThese functions are used for auxiliary Optional accessories. There are differences between the individual models. For details, please refer to the accessory manual.
ChargingWhen using the thermal imager for the first time, use the USB charger to charge battery for at least four hours. When charging, insert the matching Type C USB charging cable and plug in the power.
Charging specifications: 5V, 2A.Charging indicator is red during normal charging.Charging indicator is green when charging is complete.Do not charge the battery in an environment over 40˚C or 104˚ F.
Note - Charging when the thermal imageris being used does not charge the battery. This icon indicates the unit is using the external power for normal operations.
This icon indicates that the external power supply is charging the battery.
Video OutputThere is a video output port beside the USB inter-face on the side of the thermal imager, and is simply plug and play.
The screen image of the thermal imager can be output to an external screen through the matching HDMI video cable. There are two display modes, either the external screen or the screen of the device, but only one mode is active.
Note - When HDMI is used to connect the external display screen, the real-time screen can only be viewed by the external display. There is no screen display on the screen of this device. When the
HDMI cable is unplugged, the screen of the device is restored.
Storage and MaintenanceWhen the thermal imager will be not used for a long time, store in a dry, well-ventilated environ-ment and charge the thermal imager at least four hours every two months during the storage
The infrared lens of the thermal imager is coated with an anti-reflection film. Clean the lens only when dirt or smudges are present. Frequent scrubbing may damage the lens coating.
To clean non-optical surfaces of the thermal imager, do not scrub with chemical solvents or cleaners. On exterior surfaces, wipe with a soft and dry microfiber cloth.
WarrantyThe Burris Thermal Hand Held products are covered by Limited Warranty and Burris will repair or replace your product if it is defective. Do not disassemble the thermal imager as this will void the warranty. Contact your nearest Burris dealer for assistance.
For detailed warranty information scan the QR codes below.
US Warranty International Warranty
This manual is available in German, French, Italian and Spanish translations at available at https://www.burrisoptics.com/sites/default/files/content/products/manuals/thermal/handheld
BOTÓN DE FUNCIÓN
BOTÓNESTADO DE
DISPOSITIVO ACTUALPRESIÓN BREVE PRESIÓN LARGA
Foto /video
Modo de foto Foto /
Modo de video/ Comienza videograb.
/ Detiene videograb.
NOTA - Los usuarios pueden ajustar el idioma del dispositivo según sus necesidades, inglés / ruso / alemán / francés / chino para elegir.
5
SHORTCUT MENU• Press the M button to enter the shortcut menu• Press the Up/Down button to switch between PIP, Screen BRI, Stadiametric Rangefinder, Hot track and energy-saving modes
Picture In Picture (PIP)
• With the PIP window open, select the left / middle / right for placement• The window image is 2X magnification of the main image
Screen Brightness• Brightness levels can be adjusted from 10 to 100 percent
Stadiametric RangefinderThe stadia metric rangefinder lets you estimate the distance of a target . There are three stadia available on the device – Rabbit (35 cm/ 13.7 in.), Boar (90 cm/ 35.4 in.), Deer ( 150 cm/ 59 in.). How to use the stadia:• Align the lower horizontal line with the bottom of the target image, press the Up/Down button to change the width between the upper and lower horizontal lines until the upper horizontal line is aligned with the top of the target icon• The distance can now be calculated and displayed automatically• By comparing the target size with the three reference animal sizes, the user can roughly calculate the distance of the target
Pista caliente• Cuando se activa la pista caliente, la cruz activa rastrea
el punto con la temperatura más alta en la escena
Súper ahorro de energía• En el modo de súper ahorro de energía, el brillo de la
pantalla se reduce al 30 por ciento y el WiFi se apaga• Cuando el modo de súper ahorro de energía está
desactivado, el brillo de la pantalla y el WiFi se restauran a su estado original
NOTA - Si no se puede encender el WiFi, verifique si el modo de súper ahorro de energía está apagado.
MENÚ PRINCIPAL• Mantenga presionado el botón M para ingresar al menú
principal• Presione el botón Arriba / Abajo para cambiar entre
ajuste de calidad de imagen, modo de calibración,WiFi, configuración de ahorro de energía,configuración de indicación, configuración general yotras configuraciones
Ajuste de calidad de imagen• Mejora de imagen - Cuando la mejora de imagen está
activada, la imagen del objetivo se puede mejorar• Modo de escena - el brillo y el contraste de la imagen
se pueden ajustar para cada modo de escena para lograr la mejor imagen
Paletas de colores• Blanco vivo - Los objetos con mayor temperatura se
muestran en blanco o gris claro.• Negro vivo - Los objetos con mayor temperatura se
muestran en negro o gris oscuro• Rojo vivo - Los objetos con mayor temperatura se
muestran en rojo• Rojo vivo ajustable - los objetos con mayor temperatura
se muestran en rojo. Los usuarios pueden ajustar la intensidad del rango de calor rojo del nivel 1 al 10
• Iron - The objects with higher temperature show in iron red• Blue hot - The objects with lowest temperature show in blue or dark blue, and the object with higher temperature shows in red
Brightness• Adjustable from level 1 to 10 level
Contrast• Adjustable from level 1 to 10 level
Calibration Mode• Automatic - The device automatically corrects the image quality without any action• Scene - The user manually corrects the image quality as needed. For manual correction, the lens cover needs to be attached before calibration• Shutter - The user manually corrects the image quality as needed and the device shutter closes for calibration.
WiFiIt can be connected to the mobile phone via WiFi and the thermal imager can be operated remotely via the mobile phone APP. When WiFi is turned on, but not connected, the WiFi icon flashes and the WiFi name is displayed at the top of the screen. When the WiFi is connected, the WiFi icon is always on• Mobile phone APP - Search and download 'Burris Thermal' APP in the mobile phone app market. Open the app, and find the WiFi name of “Burris BTH” in your mobile phone WiFi settings, enter the password '12345678', then after the connection is successful, the user can operate remotely• Android - Please search and download in Google play• IOS - Please search and download in the APP store
Power Saving Settings• Auto Stand-By - If there is no operation in the setting time, it enters Stand-by mode. If the work indicator is on before entering Standby mode, the work indicator will flash in Stand-by mode• Auto Power - If there is no operation in the setting time, it will power off automaticallyNote - Auto Stand-by and Auto power-off cannot be performed while WiFi is connected.
Indication Settings• Charging indication - In the charging state, you can turn the charging indicator on or off• Working indication - In the normal working state, you can turn the working indicator on or off
General Settings• Time style - Select 12-hour or 24-hour style• Date style - Choose different date styles according to your preference• Time setup - Adjust the current date and time
Watermark Settings• Users can choose the display style of date and time watermark on the screen
Language Settings• Language choices include English/Russian/ German/French/Chinese.
Memory Card Formatting• Allows the use to format and empty onboard storage
Restore Default• This function restores the factory settings.
Other Settings (optional accessories feature settings)• Ranging• Ranging adjustment• Pointer
• Pointer adjustmentThese functions are used for auxiliary Optional accessories. There are differences between the individual models. For details, please refer to the accessory manual.
ChargingWhen using the thermal imager for the first time, use the USB charger to charge battery for at least four hours. When charging, insert the matching Type C USB charging cable and plug in the power.
Charging specifications: 5V, 2A.Charging indicator is red during normal charging.Charging indicator is green when charging is complete.Do not charge the battery in an environment over 40˚C or 104˚ F.
Note - Charging when the thermal imageris being used does not charge the battery. This icon indicates the unit is using the external power for normal operations.
This icon indicates that the external power supply is charging the battery.
Video OutputThere is a video output port beside the USB inter-face on the side of the thermal imager, and is simply plug and play.
The screen image of the thermal imager can be output to an external screen through the matching HDMI video cable. There are two display modes, either the external screen or the screen of the device, but only one mode is active.
Note - When HDMI is used to connect the external display screen, the real-time screen can only be viewed by the external display. There is no screen display on the screen of this device. When the
HDMI cable is unplugged, the screen of the device is restored.
Storage and MaintenanceWhen the thermal imager will be not used for a long time, store in a dry, well-ventilated environ-ment and charge the thermal imager at least four hours every two months during the storage
The infrared lens of the thermal imager is coated with an anti-reflection film. Clean the lens only when dirt or smudges are present. Frequent scrubbing may damage the lens coating.
To clean non-optical surfaces of the thermal imager, do not scrub with chemical solvents or cleaners. On exterior surfaces, wipe with a soft and dry microfiber cloth.
WarrantyThe Burris Thermal Hand Held products are covered by Limited Warranty and Burris will repair or replace your product if it is defective. Do not disassemble the thermal imager as this will void the warranty. Contact your nearest Burris dealer for assistance.
For detailed warranty information scan the QR codes below.
US Warranty International Warranty
This manual is available in German, French, Italian and Spanish translations at available at https://www.burrisoptics.com/sites/default/files/content/products/manuals/thermal/handheld
6
SHORTCUT MENU• Press the M button to enter the shortcut menu• Press the Up/Down button to switch between PIP, Screen BRI, Stadiametric Rangefinder, Hot track and energy-saving modes
Picture In Picture (PIP)
• With the PIP window open, select the left / middle / right for placement• The window image is 2X magnification of the main image
Screen Brightness• Brightness levels can be adjusted from 10 to 100 percent
Stadiametric RangefinderThe stadia metric rangefinder lets you estimate the distance of a target . There are three stadia available on the device – Rabbit (35 cm/ 13.7 in.), Boar (90 cm/ 35.4 in.), Deer ( 150 cm/ 59 in.). How to use the stadia:• Align the lower horizontal line with the bottom of the target image, press the Up/Down button to change the width between the upper and lower horizontal lines until the upper horizontal line is aligned with the top of the target icon• The distance can now be calculated and displayed automatically• By comparing the target size with the three reference animal sizes, the user can roughly calculate the distance of the target
Hot Track• When hot track is turned on, the active crosshair tracks the point with the highest temperature in the scene
Super Energy-Saving Mode• In the super energy-saving mode, screen bright- ness is reduced to 30 percent and the WiFi is turned off• When the Super energy-saving mode is off, the screen brightness and WiFi are restored to their original state
NOTE - If WiFi cannot be turned on, please check if the super energy-saving mode is off.
MAIN MENU• Press and hold the M button to enter the main menu• Press the Up/Down button to switch between Image quality adjustment, Calibration mode, WiFi, power saving settings, indication settings, general settings and other settings
Image Quality Adjustment• Image enhancement - When the image enhance- ment is turned on, the image of the target can be enhanced• Scene mode - Image brightness and contrast can be adjusted for each scene mode to achieve the best image
Color Palettes• White hot - The objects with higher temperature show in white or light gray• Black hot - The objects with higher temperature show in black or dark gray• Red hot - The objects with higher temperature show in red• Adjustable red hot - The objects with higher temperature show in red. Users can adjust the intensity of range of red heat from level 1 to 10
• Hierro - Los objetos con mayor temperatura se muestran en rojo hierro
• Azul vivo - Los objetos con la temperatura más baja se muestran en azul o azul oscuro, y el objeto con la temperatura más alta se muestra en rojo
Brillo• Ajustable del nivel 1 al nivel 10Contraste• Ajustable del nivel 1 al nivel 10Modo de calibrado• Automático: el dispositivo corrige
automáticamente la calidad de la imagen sin ninguna acción
• Escena: El usuario corrige manualmente la calidad de la imagen según sea necesario. Para la corrección manual, la tapa de la lente debe colocarse antes de lacalibración
• Obturador - El usuario corrige manualmente la calidad de la imagen según sea necesario y el obturador del dispositivo se cierra para la calibración.
WiFiSe puede conectar al teléfono móvil a través de
WiFi y la cámara termográfica se puede operar de forma remota a través de la App del teléfono móvil. Cuando el WiFi está encendido,pero no conectado, el icono de WiFi parpadea y el nombre de WiFi se muestra en la parte superior de la pantalla. Cuando el WiFi está conectado, el icono de WiFi está siempre activo
• App para teléfonos móviles - Busque ydescargue la App ‘Burris Thermal’ en el mercado de Apps para teléfonos móviles. Abra la App y busque el WiFi nombre de “Burris BTH” en la configuración de WiFi de su teléfono móvil, ingrese la contraseña ‘12345678’, luego, una vez que la conexión sea exitosa, el usuario puede operar de forma remota
• Android - Por favor, busque y descargue enGoogle Play• IOS - Por favor, busque y descargue en laApp Store
Power Saving Settings• Auto Stand-By - If there is no operation in the setting time, it enters Stand-by mode. If the work indicator is on before entering Standby mode, the work indicator will flash in Stand-by mode• Auto Power - If there is no operation in the setting time, it will power off automaticallyNote - Auto Stand-by and Auto power-off cannot be performed while WiFi is connected.
Indication Settings• Charging indication - In the charging state, you can turn the charging indicator on or off• Working indication - In the normal working state, you can turn the working indicator on or off
General Settings• Time style - Select 12-hour or 24-hour style• Date style - Choose different date styles according to your preference• Time setup - Adjust the current date and time
Watermark Settings• Users can choose the display style of date and time watermark on the screen
Language Settings• Language choices include English/Russian/ German/French/Chinese.
Memory Card Formatting• Allows the use to format and empty onboard storage
Restore Default• This function restores the factory settings.
Other Settings (optional accessories feature settings)• Ranging• Ranging adjustment• Pointer
• Pointer adjustmentThese functions are used for auxiliary Optional accessories. There are differences between the individual models. For details, please refer to the accessory manual.
ChargingWhen using the thermal imager for the first time, use the USB charger to charge battery for at least four hours. When charging, insert the matching Type C USB charging cable and plug in the power.
Charging specifications: 5V, 2A.Charging indicator is red during normal charging.Charging indicator is green when charging is complete.Do not charge the battery in an environment over 40˚C or 104˚ F.
Note - Charging when the thermal imageris being used does not charge the battery. This icon indicates the unit is using the external power for normal operations.
This icon indicates that the external power supply is charging the battery.
Video OutputThere is a video output port beside the USB inter-face on the side of the thermal imager, and is simply plug and play.
The screen image of the thermal imager can be output to an external screen through the matching HDMI video cable. There are two display modes, either the external screen or the screen of the device, but only one mode is active.
Note - When HDMI is used to connect the external display screen, the real-time screen can only be viewed by the external display. There is no screen display on the screen of this device. When the
HDMI cable is unplugged, the screen of the device is restored.
Storage and MaintenanceWhen the thermal imager will be not used for a long time, store in a dry, well-ventilated environ-ment and charge the thermal imager at least four hours every two months during the storage
The infrared lens of the thermal imager is coated with an anti-reflection film. Clean the lens only when dirt or smudges are present. Frequent scrubbing may damage the lens coating.
To clean non-optical surfaces of the thermal imager, do not scrub with chemical solvents or cleaners. On exterior surfaces, wipe with a soft and dry microfiber cloth.
WarrantyThe Burris Thermal Hand Held products are covered by Limited Warranty and Burris will repair or replace your product if it is defective. Do not disassemble the thermal imager as this will void the warranty. Contact your nearest Burris dealer for assistance.
For detailed warranty information scan the QR codes below.
US Warranty International Warranty
This manual is available in German, French, Italian and Spanish translations at available at https://www.burrisoptics.com/sites/default/files/content/products/manuals/thermal/handheld
SHORTCUT MENU• Press the M button to enter the shortcut menu• Press the Up/Down button to switch between PIP, Screen BRI, Stadiametric Rangefinder, Hot track and energy-saving modes
Picture In Picture (PIP)
• With the PIP window open, select the left / middle / right for placement• The window image is 2X magnification of the main image
Screen Brightness• Brightness levels can be adjusted from 10 to 100 percent
Stadiametric RangefinderThe stadia metric rangefinder lets you estimate the distance of a target . There are three stadia available on the device – Rabbit (35 cm/ 13.7 in.), Boar (90 cm/ 35.4 in.), Deer ( 150 cm/ 59 in.). How to use the stadia:• Align the lower horizontal line with the bottom of the target image, press the Up/Down button to change the width between the upper and lower horizontal lines until the upper horizontal line is aligned with the top of the target icon• The distance can now be calculated and displayed automatically• By comparing the target size with the three reference animal sizes, the user can roughly calculate the distance of the target
Hot Track• When hot track is turned on, the active crosshair tracks the point with the highest temperature in the scene
Super Energy-Saving Mode• In the super energy-saving mode, screen bright- ness is reduced to 30 percent and the WiFi is turned off• When the Super energy-saving mode is off, the screen brightness and WiFi are restored to their original state
NOTE - If WiFi cannot be turned on, please check if the super energy-saving mode is off.
MAIN MENU• Press and hold the M button to enter the main menu• Press the Up/Down button to switch between Image quality adjustment, Calibration mode, WiFi, power saving settings, indication settings, general settings and other settings
Image Quality Adjustment• Image enhancement - When the image enhance- ment is turned on, the image of the target can be enhanced• Scene mode - Image brightness and contrast can be adjusted for each scene mode to achieve the best image
Color Palettes• White hot - The objects with higher temperature show in white or light gray• Black hot - The objects with higher temperature show in black or dark gray• Red hot - The objects with higher temperature show in red• Adjustable red hot - The objects with higher temperature show in red. Users can adjust the intensity of range of red heat from level 1 to 10
7
• Iron - The objects with higher temperature show in iron red• Blue hot - The objects with lowest temperature show in blue or dark blue, and the object with higher temperature shows in red
Brightness• Adjustable from level 1 to 10 level
Contrast• Adjustable from level 1 to 10 level
Calibration Mode• Automatic - The device automatically corrects the image quality without any action• Scene - The user manually corrects the image quality as needed. For manual correction, the lens cover needs to be attached before calibration• Shutter - The user manually corrects the image quality as needed and the device shutter closes for calibration.
WiFiIt can be connected to the mobile phone via WiFi and the thermal imager can be operated remotely via the mobile phone APP. When WiFi is turned on, but not connected, the WiFi icon flashes and the WiFi name is displayed at the top of the screen. When the WiFi is connected, the WiFi icon is always on• Mobile phone APP - Search and download 'Burris Thermal' APP in the mobile phone app market. Open the app, and find the WiFi name of “Burris BTH” in your mobile phone WiFi settings, enter the password '12345678', then after the connection is successful, the user can operate remotely• Android - Please search and download in Google play• IOS - Please search and download in the APP store
Configuración de ahorro de energía• Auto Modo de espera - Si no se realiza ninguna operación en el tiempo de configuración, entra en modo de espera. Si el indicador de trabajo está encendido antes de ingresar al modo de espera, el indicador de trabajo parpadeará en el modo de espera• Auto Energía: si no se realiza ninguna operación en el tiempo configurado, se apagará automáticamenteNota - El modo de espera automático y el apagado automático no se pueden realizar mientras el WiFi está conectado.
Configuración de indicación• Indicación de carga - En el estado de carga, puede en-cender o apagar el indicador de carga• Indicación de trabajo - En el estado de trabajo normal,puede encender o apagar el indicador de trabajo
Configuración general• Estilo de hora - Seleccione el estilo de 12 o 24 horas• Estilo de fecha - Elija diferentes estilos de fecha según sus preferencias• Configuración de la hora - Ajuste la fecha y la hora actuales
Configuración de marca de agua• Los usuarios pueden elegir el estilo de visualización de la marca de agua de fecha y hora en la pantalla
Ajustes de idioma• Las opciones de idioma incluyen inglés / ruso / alemán / francés / chino.
Formateo de la tarjeta de memoria• Permite el uso para formatear y vaciar el almacenamiento a bordo
Restaurar valores predeterminados• Esta función restaura la configuración de fábrica.
Otras configuraciones (configuración de funciones de accesorios opcionales) • Rango• Ajuste de rango• Puntero
• Pointer adjustmentThese functions are used for auxiliary Optional accessories. There are differences between the individual models. For details, please refer to the accessory manual.
ChargingWhen using the thermal imager for the first time, use the USB charger to charge battery for at least four hours. When charging, insert the matching Type C USB charging cable and plug in the power.
Charging specifications: 5V, 2A.Charging indicator is red during normal charging.Charging indicator is green when charging is complete.Do not charge the battery in an environment over 40˚C or 104˚ F.
Note - Charging when the thermal imageris being used does not charge the battery. This icon indicates the unit is using the external power for normal operations.
This icon indicates that the external power supply is charging the battery.
Video OutputThere is a video output port beside the USB inter-face on the side of the thermal imager, and is simply plug and play.
The screen image of the thermal imager can be output to an external screen through the matching HDMI video cable. There are two display modes, either the external screen or the screen of the device, but only one mode is active.
Note - When HDMI is used to connect the external display screen, the real-time screen can only be viewed by the external display. There is no screen display on the screen of this device. When the
HDMI cable is unplugged, the screen of the device is restored.
Storage and MaintenanceWhen the thermal imager will be not used for a long time, store in a dry, well-ventilated environ-ment and charge the thermal imager at least four hours every two months during the storage
The infrared lens of the thermal imager is coated with an anti-reflection film. Clean the lens only when dirt or smudges are present. Frequent scrubbing may damage the lens coating.
To clean non-optical surfaces of the thermal imager, do not scrub with chemical solvents or cleaners. On exterior surfaces, wipe with a soft and dry microfiber cloth.
WarrantyThe Burris Thermal Hand Held products are covered by Limited Warranty and Burris will repair or replace your product if it is defective. Do not disassemble the thermal imager as this will void the warranty. Contact your nearest Burris dealer for assistance.
For detailed warranty information scan the QR codes below.
US Warranty International Warranty
This manual is available in German, French, Italian and Spanish translations at available at https://www.burrisoptics.com/sites/default/files/content/products/manuals/thermal/handheld
SHORTCUT MENU• Press the M button to enter the shortcut menu• Press the Up/Down button to switch between PIP, Screen BRI, Stadiametric Rangefinder, Hot track and energy-saving modes
Picture In Picture (PIP)
• With the PIP window open, select the left / middle / right for placement• The window image is 2X magnification of the main image
Screen Brightness• Brightness levels can be adjusted from 10 to 100 percent
Stadiametric RangefinderThe stadia metric rangefinder lets you estimate the distance of a target . There are three stadia available on the device – Rabbit (35 cm/ 13.7 in.), Boar (90 cm/ 35.4 in.), Deer ( 150 cm/ 59 in.). How to use the stadia:• Align the lower horizontal line with the bottom of the target image, press the Up/Down button to change the width between the upper and lower horizontal lines until the upper horizontal line is aligned with the top of the target icon• The distance can now be calculated and displayed automatically• By comparing the target size with the three reference animal sizes, the user can roughly calculate the distance of the target
Hot Track• When hot track is turned on, the active crosshair tracks the point with the highest temperature in the scene
Super Energy-Saving Mode• In the super energy-saving mode, screen bright- ness is reduced to 30 percent and the WiFi is turned off• When the Super energy-saving mode is off, the screen brightness and WiFi are restored to their original state
NOTE - If WiFi cannot be turned on, please check if the super energy-saving mode is off.
MAIN MENU• Press and hold the M button to enter the main menu• Press the Up/Down button to switch between Image quality adjustment, Calibration mode, WiFi, power saving settings, indication settings, general settings and other settings
Image Quality Adjustment• Image enhancement - When the image enhance- ment is turned on, the image of the target can be enhanced• Scene mode - Image brightness and contrast can be adjusted for each scene mode to achieve the best image
Color Palettes• White hot - The objects with higher temperature show in white or light gray• Black hot - The objects with higher temperature show in black or dark gray• Red hot - The objects with higher temperature show in red• Adjustable red hot - The objects with higher temperature show in red. Users can adjust the intensity of range of red heat from level 1 to 10
8
• Iron - The objects with higher temperature show in iron red• Blue hot - The objects with lowest temperature show in blue or dark blue, and the object with higher temperature shows in red
Brightness• Adjustable from level 1 to 10 level
Contrast• Adjustable from level 1 to 10 level
Calibration Mode• Automatic - The device automatically corrects the image quality without any action• Scene - The user manually corrects the image quality as needed. For manual correction, the lens cover needs to be attached before calibration• Shutter - The user manually corrects the image quality as needed and the device shutter closes for calibration.
WiFiIt can be connected to the mobile phone via WiFi and the thermal imager can be operated remotely via the mobile phone APP. When WiFi is turned on, but not connected, the WiFi icon flashes and the WiFi name is displayed at the top of the screen. When the WiFi is connected, the WiFi icon is always on• Mobile phone APP - Search and download 'Burris Thermal' APP in the mobile phone app market. Open the app, and find the WiFi name of “Burris BTH” in your mobile phone WiFi settings, enter the password '12345678', then after the connection is successful, the user can operate remotely• Android - Please search and download in Google play• IOS - Please search and download in the APP store
Power Saving Settings• Auto Stand-By - If there is no operation in the setting time, it enters Stand-by mode. If the work indicator is on before entering Standby mode, the work indicator will flash in Stand-by mode• Auto Power - If there is no operation in the setting time, it will power off automaticallyNote - Auto Stand-by and Auto power-off cannot be performed while WiFi is connected.
Indication Settings• Charging indication - In the charging state, you can turn the charging indicator on or off• Working indication - In the normal working state, you can turn the working indicator on or off
General Settings• Time style - Select 12-hour or 24-hour style• Date style - Choose different date styles according to your preference• Time setup - Adjust the current date and time
Watermark Settings• Users can choose the display style of date and time watermark on the screen
Language Settings• Language choices include English/Russian/ German/French/Chinese.
Memory Card Formatting• Allows the use to format and empty onboard storage
Restore Default• This function restores the factory settings.
Other Settings (optional accessories feature settings)• Ranging• Ranging adjustment• Pointer
• Ajuste del punteroEstas funciones se utilizan para accesorios opcionales auxiliares. Existen diferencias entre los modelos indivi-duales. Para obtener más información, consulte el ma-nual de accesorios.
CargandoCuando utilice la cámara termográfica por primera vez,utilice el cargador USB para cargar la batería durante al menos cuatro horas. Al cargar, inserte el cable de carga USB tipo C correspondiente y enchufe la alimentación.
Especificaciones de carga: 5V, 2A.El indicador de carga está rojo durante la carga normal. El indicador de carga está verde cuando se completa la car-ga.No cargue la batería en un entorno de 40˚C o 104˚ F.
Nota - Cuando se utiliza la cámara termográfica no carga la batería. Este icono indica que la unidad está utilizando la alimentación externa para operaciones normales.
Este icono indica que la fuente de alimentación externa está cargando la batería.
Salida de vídeoHay un puerto de salida de video al lado de la interfaz USB en el costado de la cámara ter-mográfica, y es simplemente plug and play.
La imagen de la pantalla de la cámara termográfica se puede enviar a una pantalla externa a través del cable de video HDMI correspondiente. Hay dos modos de visua-lización, pantalla externa o pantalla del dispositivo, pero solo un modo está activo.
Nota - Cuando se utiliza HDMI para conectar la pantalla de visualización externa, la pantalla en tiempo real solo se puede ver mediante la pantalla externa. No hay visu-alización de pantalla en la pantalla de este dispositivo. Cuando el
HDMI cable is unplugged, the screen of the device is restored.
Storage and MaintenanceWhen the thermal imager will be not used for a long time, store in a dry, well-ventilated environ-ment and charge the thermal imager at least four hours every two months during the storage
The infrared lens of the thermal imager is coated with an anti-reflection film. Clean the lens only when dirt or smudges are present. Frequent scrubbing may damage the lens coating.
To clean non-optical surfaces of the thermal imager, do not scrub with chemical solvents or cleaners. On exterior surfaces, wipe with a soft and dry microfiber cloth.
WarrantyThe Burris Thermal Hand Held products are covered by Limited Warranty and Burris will repair or replace your product if it is defective. Do not disassemble the thermal imager as this will void the warranty. Contact your nearest Burris dealer for assistance.
For detailed warranty information scan the QR codes below.
US Warranty International Warranty
This manual is available in German, French, Italian and Spanish translations at available at https://www.burrisoptics.com/sites/default/files/content/products/manuals/thermal/handheld
SHORTCUT MENU• Press the M button to enter the shortcut menu• Press the Up/Down button to switch between PIP, Screen BRI, Stadiametric Rangefinder, Hot track and energy-saving modes
Picture In Picture (PIP)
• With the PIP window open, select the left / middle / right for placement• The window image is 2X magnification of the main image
Screen Brightness• Brightness levels can be adjusted from 10 to 100 percent
Stadiametric RangefinderThe stadia metric rangefinder lets you estimate the distance of a target . There are three stadia available on the device – Rabbit (35 cm/ 13.7 in.), Boar (90 cm/ 35.4 in.), Deer ( 150 cm/ 59 in.). How to use the stadia:• Align the lower horizontal line with the bottom of the target image, press the Up/Down button to change the width between the upper and lower horizontal lines until the upper horizontal line is aligned with the top of the target icon• The distance can now be calculated and displayed automatically• By comparing the target size with the three reference animal sizes, the user can roughly calculate the distance of the target
Hot Track• When hot track is turned on, the active crosshair tracks the point with the highest temperature in the scene
Super Energy-Saving Mode• In the super energy-saving mode, screen bright- ness is reduced to 30 percent and the WiFi is turned off• When the Super energy-saving mode is off, the screen brightness and WiFi are restored to their original state
NOTE - If WiFi cannot be turned on, please check if the super energy-saving mode is off.
MAIN MENU• Press and hold the M button to enter the main menu• Press the Up/Down button to switch between Image quality adjustment, Calibration mode, WiFi, power saving settings, indication settings, general settings and other settings
Image Quality Adjustment• Image enhancement - When the image enhance- ment is turned on, the image of the target can be enhanced• Scene mode - Image brightness and contrast can be adjusted for each scene mode to achieve the best image
Color Palettes• White hot - The objects with higher temperature show in white or light gray• Black hot - The objects with higher temperature show in black or dark gray• Red hot - The objects with higher temperature show in red• Adjustable red hot - The objects with higher temperature show in red. Users can adjust the intensity of range of red heat from level 1 to 10
9
• Iron - The objects with higher temperature show in iron red• Blue hot - The objects with lowest temperature show in blue or dark blue, and the object with higher temperature shows in red
Brightness• Adjustable from level 1 to 10 level
Contrast• Adjustable from level 1 to 10 level
Calibration Mode• Automatic - The device automatically corrects the image quality without any action• Scene - The user manually corrects the image quality as needed. For manual correction, the lens cover needs to be attached before calibration• Shutter - The user manually corrects the image quality as needed and the device shutter closes for calibration.
WiFiIt can be connected to the mobile phone via WiFi and the thermal imager can be operated remotely via the mobile phone APP. When WiFi is turned on, but not connected, the WiFi icon flashes and the WiFi name is displayed at the top of the screen. When the WiFi is connected, the WiFi icon is always on• Mobile phone APP - Search and download 'Burris Thermal' APP in the mobile phone app market. Open the app, and find the WiFi name of “Burris BTH” in your mobile phone WiFi settings, enter the password '12345678', then after the connection is successful, the user can operate remotely• Android - Please search and download in Google play• IOS - Please search and download in the APP store
Power Saving Settings• Auto Stand-By - If there is no operation in the setting time, it enters Stand-by mode. If the work indicator is on before entering Standby mode, the work indicator will flash in Stand-by mode• Auto Power - If there is no operation in the setting time, it will power off automaticallyNote - Auto Stand-by and Auto power-off cannot be performed while WiFi is connected.
Indication Settings• Charging indication - In the charging state, you can turn the charging indicator on or off• Working indication - In the normal working state, you can turn the working indicator on or off
General Settings• Time style - Select 12-hour or 24-hour style• Date style - Choose different date styles according to your preference• Time setup - Adjust the current date and time
Watermark Settings• Users can choose the display style of date and time watermark on the screen
Language Settings• Language choices include English/Russian/ German/French/Chinese.
Memory Card Formatting• Allows the use to format and empty onboard storage
Restore Default• This function restores the factory settings.
Other Settings (optional accessories feature settings)• Ranging• Ranging adjustment• Pointer
• Pointer adjustmentThese functions are used for auxiliary Optional accessories. There are differences between the individual models. For details, please refer to the accessory manual.
ChargingWhen using the thermal imager for the first time, use the USB charger to charge battery for at least four hours. When charging, insert the matching Type C USB charging cable and plug in the power.
Charging specifications: 5V, 2A.Charging indicator is red during normal charging.Charging indicator is green when charging is complete.Do not charge the battery in an environment over 40˚C or 104˚ F.
Note - Charging when the thermal imageris being used does not charge the battery. This icon indicates the unit is using the external power for normal operations.
This icon indicates that the external power supply is charging the battery.
Video OutputThere is a video output port beside the USB inter-face on the side of the thermal imager, and is simply plug and play.
The screen image of the thermal imager can be output to an external screen through the matching HDMI video cable. There are two display modes, either the external screen or the screen of the device, but only one mode is active.
Note - When HDMI is used to connect the external display screen, the real-time screen can only be viewed by the external display. There is no screen display on the screen of this device. When the
cable HDMI está desconectado, la pantalla del dispos-itivo se restaura.
Almacenaje y mantenimientoCuando la cámara termográfica no se vaya a utilizar durante mucho tiempo, almacénela en un ambiente seco y bien ventilado y cargue la cámara termográfica al menos cuatro horas cada dos meses durante el almacenamiento
La lente infrarroja de la cámara termográfica está recubierta con una película antirreflectante. Limpie la lente solo cuando haya suciedad o manchas. El restregado frecuente puede dañar el revestimiento de la lente.
Para limpiar superficies no ópticas de la cámara termográfica, no frote con solventes químicos o limpiadores.En superficies exteriores, limpie con un paño de mi-crofibra suave y seco.
GarantíaLos productos de mano térmicos de Burris están cu-biertos por una garantía limitada y Burris reparará o reemplazará su producto si está defectuoso. No desmonte la cámara termográfica, ya que esto anulará la garantía. Comuníquese con su distribuidor Burris más cercano para obtener ayuda.
Para obtener información detallada sobre la garantía,escanee los códigos QR a continuación.
Garantía de EE. UU. Garantía internacional
Este manual está disponible en traducciones al alemán, francés, italiano y español en https:// www.burrisoptics.com/sites/default/files/content/products/manuals/thermal/handheld
10
Cámara termográfica Burris
Burris Company • 331 East 8th St.,Greeley, CO 80631 (970) 356-1670
BurrisOptics.com • Facebook.com/BurrisOptics