7/23/2019 CARGA.pdf

1/4

CARGAS DE TUBERA

SOBRE BOQUILLAS

7/23/2019 CARGA.pdf

2/4

Convenciones:

W PESO MUERTO DE LA TUBERIA Y EL FLUIDOPdes PRESION DE DISEO

Pop PRESION DE OPERACIONHP PRESION DE PRUEBA HIDROSTATICA

Tdes TEMPERATURA DE DISEOTop TEMPERATURA DE OPERACION

OCC CARGAS OCASIONALESPara cargas primarias (Condiciones de diseo): Viento, Sismo.Para cargas secundarias (Condiciones de operacin): Viento, Sismo, Slug flow

Otros CONDICIONES ESPECIALESPara cargas primarias: Prueba Hidrosttica (W+HP)

GENERAL NOTES

Revision shall be highlight with clouds indicating the revision number (ex.:

Conventions:

W DEATH WEIGHT OF PIPING SYSTEM AND CONTAINED FLUID

Pdes DESIGN PRESSUREPop OPERATION PRESSUREHP HYDROSTATIC TEST PRESSUREPso STEAM OUT PRESSURE

Tdes DESIGN TEMPERATURETop OPERATION TEMPERATURETso STEAM OUT TEMPERATURE

OCC OCCASIONAL LOAD :For primary loads (Design conditions): Wind, Earthquake.For secondary loads (Operation conditions): Wind, Earthquake, Slug flow

Others SPECIAL CONDITIONS :For primary loads: Hydrostatic test (W+HP)For secondary loads: Steam out (W+Pso+Tso)

7/23/2019 CARGA.pdf

3/4

CONVENCION DE SIGNOS

Para fuerzas y momentos referirse a las siguientes convenciones:

SIGN CONVENTIONFor forces and moments refer to the following convention:

The direction for loads and moments is indicative and both directions shall be consideredLas direcciones para cargas y momentos son indicativas y ambas deben ser consideradas

7/23/2019 CARGA.pdf

4/4

DATA LOADCONDITION

FORCES KN (1), (2) MOMENTS KNm (1), (2)

FX FY FZ MX MY MZ

NOZZLE N: A1W+Pop+Top 10.4 10.4 10.4 6.2 5.4 5.4Entrada de Gas

a la URVSIZE:

8

DATA LOADCONDITION

FORCES KN (1), (2) MOMENTS KNm (1), (2)

FX FY FZ MX MY MZ

NOZZLE N: A2W+Pop+Top 10.4 10.4 10.4 6.2 5.4 5.4Salida de

condensados dela URV

SIZE:8

DATA LOADCONDITION

FORCES KN (1), (2) MOMENTS KNm (1), (2)

FX FY FZ MX MY MZ

NOZZLE N: A3

W+Pop+Top 7.8 7.8 7.8 3.5 3.0 3.0Retorno demnimo flujo de

la URV

SIZE:6

NOTES:

(1) FORCES AND MOMENTS ARE APPLIED AT SURFACE INTERSECTION BETWEEN SHELL/HEAD ANDNOZZLE.

(2) DIRECTION OF LOADS ARE TO BE CONSIDERED ACCORDING TO REFERENCE COORDINATES.

(3) FORCES AND MOMENTS ARE INDICATED AS ABSOLUTE VALUES