CS0001-11_B_doc_CS0001-11_B-Tarpaulin
-
Upload
aithenhi88 -
Category
Documents
-
view
213 -
download
0
Transcript of CS0001-11_B_doc_CS0001-11_B-Tarpaulin
-
7/24/2019 CS0001-11_B_doc_CS0001-11_B-Tarpaulin
1/3
Doc.: CS0001-11CONDICIONES DE SUMINISTRO
SUPPLY CONDITIONS Rev.: B
TORRE MONTAJE TOLDOS DE PROTECCIN
TOWER ASSEMBLY OF THE PROTECTIVE TARPAULINSP. 1 /3
RevFechaDate
Descripcin de la revisinDescription of the revision
A 03.03.08 Elaboracin / First edition
B 21.09.10 Modificar montaje toldo / modify tarpaulins assembly
C
D
E
Realizado / Done Revisado / Reviewed Aprobado / Approved
En caso de duda prevalecer la versin en castellano/ In case of doubt, the Spanish version shall prevail. 2010 ACCIONA WINDPOWER S.A. Todos los derechos reservados / All rights reserved
1. OBJETO
Esta condicin de suministro tiene comoobjeto el describir el ensamblaje de lostoldos de proteccin de las torres deAcciona Windpower.
2. ELEMENTOS NECESARIOS
Para montar los toldos se necesitan lossiguientes elementos:
Toldo de proteccin especfico a cadabrida
Tapn con empujador
3. MONTAJE
Seleccionar el toldo adecuado a la
brida Colocarlo sobre la brida de tal forma
que el logotipo Acciona Windpowerquede en horizontal y las ventanas enla posicin superior e inferior (Imagen1).
1. AIM
This supply condition describes theassembly of the different specialcomponents used in the AccionaWindpower towers.
2. NECESSARY ELEMENTS
For assembling the protective tarpaulinsyou need the following elements
Specific protective tarpaulins to eachflange
Plug with pushrod
3. ASSEMBLY
Select the appropriate protective
tarpaulin for the flange Place it on the flange so that the
Acciona Windpower logotype ishorizontal and the windows are ontop and under it (picture 1).
2 1 / 0 9 / 1 0 2 1 / 0 9 / 1 0 2 1 / 0 9 / 1 0
-
7/24/2019 CS0001-11_B_doc_CS0001-11_B-Tarpaulin
2/3
Doc.: CS0001-11CONDICIONES DE SUMINISTRO
SUPPLY CONDITIONS Rev.: B
TORRE MONTAJE TOLDOS DE PROTECCIN
TOWER ASSEMBLY OF THE PROTECTIVE TARPAULINSP. 2 /3
Imagen 1 / Picture 1
Sujetar el toldo introduciendo el tapnen todos y cada uno de los agujeros.Una vez colocado se introducir elempujador hasta que quede a ras conel tapn utilizando para ello un martillode goma o similar (imgenes 2).
Secure the tarpaulin inserting theplugs in every hole all over it. Afterplacing the plugs, insert the pushrodsleaving them at the same level withthe help of a rubber hammer orsimilar (pictures 2).
Imgenes 2 / Pictures 2
-
7/24/2019 CS0001-11_B_doc_CS0001-11_B-Tarpaulin
3/3
Doc.: CS0001-11CONDICIONES DE SUMINISTRO
SUPPLY CONDITIONS Rev.: B
TORRE MONTAJE TOLDOS DE PROTECCIN
TOWER ASSEMBLY OF THE PROTECTIVE TARPAULINSP. 3 /3
En caso de ser necesario soltar untapn se dar un segundo golpe demartillo al empujador introducindolohasta el fondo con lo que quedarliberado (imagen 3).
If it is necessary to remove a plug,knock off the pushrod with a hammerinserting it all the way down, whichwill release it (picture 3).
Imagen 3 / Picture 3
En caso de tener que montar un tilse quitarn los taponesimprescindibles y se volvern amontar una vez retirado el til (imagen1).
Nota: no est permitido cortar el toldo porningn motivo
If it is necessary to assembly a tool,remove the indispensable plugs andreplace them once the tool has beenremoved (picture 1).
Note: the tarpaulin must NEVER be cut forno reason.