137

10P

OW

ER T

OO

LS CO

RD

ED

�

DEWALT 3/8”Straight DrillsNo. D21002 Description

• 3/8” key guard chuck• 0 - 2500 RPM• Vari - speed reversing• With belt clip• Built- in two way • 5.4 AMP motor

DEWALT® 3/8”Straight DrillNo. D21009 Description

• 3/8” keyless chuck• 0 - 2500 RPM• Vari - speed reversing• With belt clip• Built- in two way lever• With kit box• 5.4 AMP motor

DEWALT® 3/8” Right Angle DrillNo. DW160Y Description

• 3/8” keyed chuck• Paddle switch• Shielded chuck• 3.2 AMP motor• Reversing

METABO® 3/8”Straight DrillNo. Description BE530 • 3/8” keyed chuck

• Vari-Speed reversing• 4.2 AMP motor

BE560 • 3/8” keyed chuck• Vari-Speed reversing• 4.5 AMP motor

BOSCH® Straight DrillsNo. 1005VSRK Description

• 3/8” keyless chuck• 0 - 2500 RPM• VARI-SPD. reversing• Lock on switch• 5.5 Amp. motor• With case

No. 1032VSR • 3/8” keyless chuck• 0 1100 RPM, high torque• VARI-SPD reversing• Two finger trigger• Magnesium front housing• 7.5 Amp. motor

No.1034VSR • 1/2” keyed chuck

• 0-550 RPM, high torque• VARI-SPD. reversing• Two finger trigger• Magnesium front housing• 8 Amp. motor

Chuck key required is 3608571539

Milwaukee® 3/8”Magnum DrillNo. 0233-20 Description

• 3/8” keyless chuck• Variable speed (0-2800) • Reversible

Milwaukee® CloseQuarter Drills

(55º Angled Head, Paddle Switch)No. 0375-6 Description

• 3/8” keyed chuck• 0-1300 RPM

MAKITA® 1/2”D-Handle DrillNo. 3013BR Description

• 1/2” keyed chuck• Single speed (550 RPM)

MAKITA® Pistol Grip DrillsNo. Description6511LVR • 3/8” keyed chuck

• 0-1200 RPM• reversible

6510LVR • 3/8” keyed chuck• 0-1200 RPM• reversing• Heavy duty

6511X • 3/8” keyless chuck• 0-1200 RPM• reversing

DP4002 • 1/2” keyed chuck• Variable speed (0-600)• Reversible

DP4000 • 1/2” keyed chuck• Variable Speed (0-900)• Reversible

MAKITA® 3/8” Angle DrillNo. DA3010F Description

• Paddle switch w/ speedlimiting dial

• Variable speed• Reversible, 0-2400 RPM• Built-in LED job light• Reduced head height 2 5/8”

138

PO

WER

TO

OLS

CO

RD

ED 1

0

�

Milwaukee® 1/2”Magnum DrillNo. 0234-6 Description

• 1/2” keyed chuck• Variable speed (0-850)• Reversible

Milwaukee® 1/2”Ergonomic Drill

No. 0299-20 Description• 1/2” keyed chuck• Variable speed (0-850)• Reversible• 8 AMP motor

Milwaukee® 1/2” D-Handle DrillNo. Description1107-1 • 1/2” keyed chuck

• Variable speed (0-600)1107-6 • Same as above but 0-500 RPM

Milwaukee® 1/2”Right Angle Drill

No. 3107 Description• 1/2” keyed chuck• Variable speed 0-500• Reversible

Milwaukee® 1/2”Super - Hawg DrillNo. 1680-21 Description

• 1/2” keyed chuck• 2 speed, reversible• Triple reduction gearing• Rotating handle• 13 AMP motor• includes case

1680-20 • Super-Hawg drill only

Milwaukee®

1/2”Hole-ShooterDrillNo. 1660-6 Description

• 1/2” keyed chuck• 450 RPM• Triple gear train

Milwaukee®

3/4” Hole - ShooterDrillNo. 1854-1 Description

• 3/4” keyed chuck• 350 RPM• Triple gear train

Milwaukee®

Hole-Hawg 1/2”Right Angle DrillNo. 1676-6 Description

• 1/2” keyed chuck• 2 Speed, reversible• Triple reduction

gearing• Up to 4 5/8”

self feed bit• 7.5 AMP motor• includes case

DEWALT®1/2”Straight DrillNo. DW235G Description

• 1/2” Keyed Chuck• 0 - 850 RPM• Variable Dual Speed• Two Finger Trigger• 7.8 AMP Motor

DEWALT® 1/2”Straight Drillwith D-HandleNo. DW130 Description

• 1/2” keyed chuck• Forward / reverse rocker switch• 2 - position rear spade handle• 3 - position side handle• Triple gear reduction• 7 AMP motor• 0-450 RPM

DEWALT® 1/2”Straight DrillNo. DW131 Description

• 1/2” keyed chuck• Trigger switch• Toggle reversing switch• Triple gear reduction• Top pipe handle• Back D - handle• 7 AMP motor• 450 RPM

DEWALT® 1/2”Right Angle DrillNo. DW120K Description

• 1/2” keyed chuck• Three speed tanges• 5 - Position side handle• 3600 right angle• 7 AMP motor

139

10P

OW

ER T

OO

LS CO

RD

ED

�

1/2” Straight DrillGeared for High SpeedNo. Description1035VSR • 1/2” keyless chuck

• 0 - 850 RPM• VARI-SPD. reversing• Two finger trigger• Magnesium front housing• 8 Amp. motor

DELTA® 8” Bench Drill PressNo. DP115 Description

• 1/4 HP, 120V, 39 lbs• 5 Spindle Speeds• 1/2” keyed chuck• Tilting table• 2” stroke

METABO® 1/2”Straight DrillNo. Description BE710 • 1/2” keyed chuck

• Vari-2 speed reversing• 5.8 amp motor

BE622 • 1/2” keyed chuck• With triple gear reduction• 31078 right angle drive optional• Vari-Speed reversing• 6 amp motor

BE1020 • 1/2” keyed chuck• Vari-2 speed reversing• 8 amp motor

MAKITA® 3/8”Hammer DrillNo. DescriptionNHP1030 3/8” keyed chuck

MAKITA® 1/2” Hammer DrillNo. DescriptionNHP1310 1/2” keyed chuck

DEWALT® 1/2”Hammer Drill

No. DW515K Description• 1/2” keyed chuck• Variable dual speed• Reversing• High / Low gear• Two finger trigger• 8.2 AMP motor• With kit box

Milwaukee® 1/2”Hammer Drill

No. Description5378-20 • 1/2” keyed chuck

• Variable 2 - speed• Reversible

5378-21 • As above plus case

BOSCH® 1/2” Hammer DrillNo. 1194AVSR Description

• 1/2” chuck• Variable dual speed• Reversible• 2 operating modes• 8 Amp. motor• With case

1194AVSRK • 1/2” chuck• Variable dual speed• Reversible• 2 operating modes• 8 Amp. motor• No case

DELTA® 16 1/2”Floor Drill PressNo. DP400 Description

• 3/4 HP, 120V, 194 lbs• 12 spindle speeds• 5/8” keyed chuck• Tilting table• 3 3/8” stroke• Flex work light

DELTA® 12” Drill Press(Bench Style)

No. DP350 Description• 1/2” HP., 120V., 78 lbs.• Variable 500-3100 RPM• 1/2” keyed chuck• Tilting table• 3 1/4” stroke• Flex work light

140

PO

WER

TO

OLS

CO

RD

ED 1

0

�

METABO® 1/2”Hammer DrillNo. SBE750 Description

• 1/2” keyed chuck• 2 speed gear box• 57000 impacts per minute• Trigger speed control• Safety clutch• To 3/4” in concrete• To 1/2” in metal• To 1 9/16” in wood• 6.2 Amp. motor• With carrying case

METABO® 1/2” Hammer Drill(The Green Beast)

No. 01208 Description • 1/2” keyed chuck• Variable 2 speed gear box• 530 inch lbs. torque• No safety clutch• To 3/4” in concrete• To 5/8” in steel• To 1 1/2” in wood• With extra long side handle• With carrying case

MAKITA® 3/4” Hammer DrillNo. DescriptionHP2010N 1/2” keyed chuck

BOSCH®RotaryHammer3/4” SDS Bits No. 11250VSR Description

• SDS bits to 3/4”• Steel to 1/2”• Wood to 3/4”• VARI-Speed reversing• 2 operating modes• 6 Amp. motor• With auto bit-lok• With case

Milwaukee® 3/4” SDS Rotary Hammer

No. Description5383-21 • To 3/4” in masonry

• Pistol grip design• Variable speed• SDS Core bits to 1 1/2”• w/case

Milwaukee® 7/8”SDS Rotary Hammer

No. Description5366-21 • To 7/8” in masonry

• Pistol grip design• Variable speed• Core bits to 2”• w/case

5368-21 • As above with D handle

BOSCHRotaryHammer7/8” SDSBitsNo. 11224VSR Description11224VSR • SDS bits to 7/8”

• Steel to 1/2”• Wood to 1”• Vario-Lock for chisels• 3 operating modes• VARI- Spd. reversing• 6.9 Amp. motor• With Auto Bit-Lok• With case

BOSCH® Rotary Hammer7/8” SDS Bits

No. 11226VS Description• SDS bits to 7/8”• Steel to 1/2”• Vario-Lock for chisels• VARI- Spd reversing• 3 operating modes• 6.9 Amp. motor• With Auto Bit-Lok• With case

BOSCH® 7/8” SDS Rotary Hammer Drill

• With automatic bit lockingNo.11228VSR Description

• SDS bits to 7/8”• Steel to 1/2”• Wood to 1”• Vario-Lock for chisels• Vari-Spd reversing• 3 operating modes• 6.9 Amp. motor• With Auto Bit-Lok• With case

METABO® Rotary Hammer7/8” SDS Plus

No. BHE22 Description• SDS “Quick-Change” chuck• To 7/8” in concrete• Percussion stop for drilling• Reversing Vari-Speed• 0-1000 RPM• 0-4600 blows per minute• Safety clutch • 4.7 Amp. motor with case

141

10P

OW

ER T

OO

LS CO

RD

ED

�

METABO® Hammer Drill1” SDS Plus

No. KHE26 Description• 1” capacity in masonry• 0-1000 RPM, reversing• 6.2 AMP motor• 1/2” chuck #31921 optional• Includes carrying case• Weight is only 7.8 lbs.

METABO® Rotary Hammer 1”SDS Plus

No. BHE-024 Description • To 1” in concrete• Percussion stop for drilling• Reversing Vari-Speed• 0-1000 RPM • 0-4600 BPM• Power interrupt protection• Brush wear indicator• Safety clutch• 5.8 Amp. motor with case

BOSCH® Rotary Hammer1” SDS Bits

No. 11239VS Description• SDS bits to 1”• Steel to 7/8”• Wood to 1”• Core Bits to 3”• Vari-Spd, 3 finger switch• 3 operating modes• Padded rear handle• 7.2 Amp. motor• With Auto Bit-Lok• With case

DEWALT® 1”SDS Rotary

Hammer DrillD-Handle, Single Mode

No. D25201K Description• 2 ft. Lbs. of impact energy

• 7.5 AMP motor• Variable speed reversing switch• Factory set clutch• Side handle adjusts 3600

• Comes with case• Weighs only 5.9 lbs.

DEWALT®

RotaryHammer1” SDS BitsNo.D25303K Description

• 7.5 AMP motor• 2.33 ft. lbs. of energy• Variable speed reversing

• 4 operational modes consisting of:- Drill only- Hammer only- Chisel- Chisel rotation

• 3 spring loaded dust shields• Up to 25% faster than

HILTI® TE-6

DEWALT® 1” SDS Compact Rotary Hammer

No. D25304K Description• W/quick change keyless chuck• 2.33 ft. lbs. of energy• Same features as D25303K

DEWALT® Rotary Hammer1” SDS Max

No. D25600K Description• 11.5 AMP motor• 8 ft. lbs. of impact energy• Spring loaded dust shields• Electronic variable speed

impact control• Soft start trigger for

precise starts• Up to 42% faster than

competitive brands• Equipped with brush wear

indicator light

Milwaukee® 1” SDS Rotary Hammer Drill

No. 5362-6 Description• Masonry bit to 1”• Core bit to 3 1/2”• Reversing switch• D-Handle style• Slip clutch• Variable speed• Includes case

DEWALT®

RotaryHammer

D-Handle,1” SDS Bits

No. D25203K Description• 2.3 ft. lbs. of impact energy• Three modes• 7.5 AMP motor• Variable speed reversing switch• Factory set clutch• Side handle adjusts 3600

• Comes with case• Weighs only 6.1 Lbs.• Will perform light “chipping”• Rotation only mode” for drilling

wood or steel

142

PO

WER

TO

OLS

CO

RD

ED 1

0

�

METABO®

Rotary Hammer1 1/8” SDS PlusNo. UHE28 Description

• To 1 1/8” in concrete• 2 speed multi-function• 0 - 950 / 0 - 2600 RPM• 0-4400 BPM • reversing• Chipping • variable speed• Safety clutch • 8 amp. motor• Includes case• Electronic power

Interrupt protection• High temperature protection• Brush wear indicator• Free 1/2” keyless quick chuck

#31921

DEWALT® 1/8” SDS RotaryHammer Drill

with Chipping FeatureNo. DW570K Description

• SDS bits to 1 1/8”• Performs light chipping• Fully sealed gearbox• 8.3 AMP motor• With kit box• VSR, three modes

(for light chipping)• With safety clutch

BOSCH® Rotary Hammer1 1/8” SDS Bits

No. 11236VS Description • SDS bits to 1 1/8”• Steel to 1”• Wood to 1 1/4”• Core bits to 3”• VARI-Speed 3 finger switch• 3 operating modes• Padded rear handle• 7.5 Amp. motor• With Auto Bit-Lok• With case

BOSCH® Rotary Hammer1 1/8” SDS Bits

No. 11222EVS Description • SDS bits to 1 1/8”• Steel to 1/2”• Wood to 1 1/4• Core bits to 3”• Vari-Spd dial• Constant - response circuitry• Service minder light• Vario - Lock for chisels• Padded handle• 7.8 Amp motor• With Auto Bit-Lok• With case

METABO® Rotary Hammer 1/4” SDS Plus

No. KHE32 Description• 1 1/4” capacity in masonry• 0-780 RPM, reversing• 7.5 AMP motor• 1/2” chuck #31921 optional• Includes carrying case• Weight is only 10.7 lbs.

Milwaukee®

1 1/2” RotaryHammer(SDS - Max Style)No. 5314-21 Description

• Solid bits to 1 1/2”• Core bits to 6”• Electronic speed control• Soft shift stop - rotation• Slip clutch• Includes case

Milwaukee®

1 1/2”Rotary Hammer(Spline Shank)No. 5318-21 Description

• Solid bits to 1 1/2”• Core bits to 6”• Electronic speed control• Soft shift stop - rotation• Slip clutch• Includes case

Milwaukee®

1 1/2” RotaryHammer(Spline Shank)No. Description5321-21 • Solid bits to 1 1/2”

• Core bits to 6”• Vibration isolation systems• Electronic speed control• Speed dial• Slip clutch• Includes case

5321-22 • As above plus accessory kit

Milwaukee® Rotary1 1/2” Hammer Drill

(SDS - Max Style)No. Description5315-21 • Solid bits to 1 1/2”

• Core bits to 6”• Vibration isolation system• Speed dial• Slip clutch• Includes case

5315-22 • As above plus accessory kit

Milwaukee®

1 1/8” SDS RotaryHammer DrillNo. 5359-21 Description

• Masonry bit to 1 1/8”• Core bit to 4”• Steel bit to 1/2”• Variable speed

143

10P

OW

ER T

OO

LS CO

RD

ED

�

BOSCH®

Rotary Hammer 1 9/16”SDS - Max No. 11240 Description

• Tool free bit changes• Rotary hammer & hammer only• Core bits to 4”

BOSCH® Rotary Hammer1 3/4” SDS-Max Combination

No.11263EVS Description• Rotary hammer & hammer only• Constant response circuitry• Padded rear handle• Core bits to 6” dia.• 13.5 Amp. motor• Weighs only 17.9 lbs• c/w case & side handle• Tool free bit changes

BOSCH® Rotary Hammer2” SDS-Max Combination

No. 11245EVS Description• Rotary hammer & hammer only• Variable speed dial• Constant response circuitry• Padded rear handle• Core bits to 6’ Dia.• 14 Amp. motor• Weighs only 24.5 lbs• c/w case & side handle• Tool free bit changes

DEWALT®

Rotary Hammer1 7/8” SDS MAXwith Chipping Feature No. D25701K Description

• w/ lock-on switch• Complete torque control• 2 - stage clutch• Anti-vibration control• Concrete drilling to 1 7/8”• 13 AMP motor

BOSCH® Chipping HammerSDS Style

No. 11320VS Description 11320VS • 6.5 AMP motor

• tool free bit changes• Variable speed trigger switch• W/cushioned soft grip handle

SDS MaxChipping HammerStock No. DescriptionKHE65 • w/ “Code” Anti-theft System*

• Suitable for chiselling work• c/w carrying case• Tool weight of 12.6 lbs

* To implement, requires code key#22500

DEWALT®

1 9/16”SDS MaxRotaryHammer Drill No. D25500K Description

• 11 AMP motorw/ overload protection

• 7.3 ft. lbs. of impact energy• Spring loaded dust shields• Electronic variable speed impact

control• Soft start trigger for precise starts• Up to 42% faster than

competitive brands• Equipped with brush

wear indicator light

BOSCH®

Rotary Hammer1 9/16” SplineCombination No.11248EVS Description

• Takes spline/round hex bits• 2 modes of operation• VARIO-Lock for chisels• Auto- Max speed dial• Service minder light• SDS Max bits to 1 9/16”• Core bits to 4”• 11 Amp. motor• With Auto Bit-Lok• With case

BOSCH®

CombinationHammer1 9/16”SDS - Max No. 11241EVS Description

• Auto-Max dial• Variable speed• 2 modes of operation• Constant response circuitry• Service minder light• VARIO-Lock for chisel• Vibration dampening handle• SDS Max bits to 1 9/16”• Core bits to 4”• 11 Amp. motor• With Auto Bit-Lok• With case

DEWALT®

RotaryHammer1 3/4”Spline DriveNo. D25550K Description

• 11 AMP motor • 7.3 ft. lbs. of impact energy• Spring loaded dust shields• Electronic Vari-Speed impact

control• Precise starts with soft start

trigger• Brush wear indicator light• Modular design

DEWALT® Rotary Hammer1 3/4” Spline Drive

No. D25650K Description• 11.5 AMP motor • 8 ft. lbs. of impact energy• Spring loaded dust shields• Electronic Vari-Speed impact

control• Precise starts with soft start

trigger• Brush wear indicator light• Modular design• 42% faster than competitive

brands

144

PO

WER

TO

OLS

CO

RD

ED 1

0

�

DEWALT®

DemolitionHammerSDS MaxNo. D25900K Description

• Anti-vibration contro• Variable speed impact

control dial (19 settings)• Large OFF/ON rocker switch • 12 chisel positions• Large rubber rear handle• 14 AMP motor

BOSCH®

DemolitionHammerSDS-MaxNo.11318EVS Description

• w/ variable speed dial• Constant response circuitry• Service minder™ light• Power indicator light• Vibration dampening light• 11 Amp motor• Weighs only 12.5 lbs• Tool free bit changes

BOSCH®

DemolitionHammerSDS-MaxNo.11316EVS Description

• w/ variable speed dial• Service minder™ light• Padded rear handle• 14 Amp motor• Weighs only 22.5 lbs• Tool free bit changes

Milwaukee® DrywallScrewdriver

No. 6742-20 Description• 0-4000 RPM• Includes #2 drywall bit• With magnetic bit holder• Includes drywall nose cone

No. 6740-20 • 0 - 2500 RPM

BOSCH® Screw DriversNo.1404VSR Description

• 0-4000 RPM• VARI-SPD. reversing• Lock-On button• Belt clip• Snap-Off nose piece• With mag bit holder• 4.8 Amp. Motor

DEWALT®

Drywall ScrewdriverNo. DW255 Description

• 0-5300 RPM• Vari - speed reversing• Two finger switch• With nosepiece• 6.0 AMP motor

No. DW252 • Same as above but 0-4000 RPMNo. DW272 Description

• 0-4000 RPM• Vari - speed reversing• Two finger switch• With rubber grip• With nosepiece• Metal gear housing• With belt clip• 6.3 AMP motor

MAKITA® ScrewdriverNo. Description6827 0 - 2500 RPM

MAKITA® DrywallScrewdriverNo. Description6825 0 - 6000 RPM6824N 0 - 4500 RPM6823 0 - 2500 RPM

DEWALT® ScrewdriversVersa - Clutch StyleNo. DescriptionDW267 • 0-2000 RPMDW268 • 0-2500 RPMDW269 • 0-1000 RPMVersa - Clutch Screwdrivers Feature......• Metal Nosepiece• Metal Gear Case• Two Finger Switch• Vari - Speed Reversing• Rubber Grip•Belt Clip

• 6.5 AMP Motors• 164 In - Lbs of Torque

Milwaukee® ScrewdriverNo. 6581-20 Description

• 0 - 2500 RPM• IAdjustable clutch• Belt clip• Quick-Lok cord, 10’• 5/16” hex socket driverincluded

BOSCH® Teks®

Screw DriverNo. 1422VSR Description

• 0-2500 RPM• VARI-SPD. reversing• Lock-On button• Belt clip• Teks nosepiece• 4.8 amp. motor

DEWALT® TEKS®

ScrewdriverNo. DW266 Description

• Depth sensitive nosepiece• 0-2500 RPM• Vari - speed reversing• Two finger switch• With rubber grip• Witch nosepiece• Metal gear housing• With belt clip• 6.5 AMP motor

145

10P

OW

ER T

OO

LS CO

RD

ED

�

Milwaukee® TEKS® ScrewdriverNo. 6790-20 Description

• 0-2500 RPM• 5/16” hex socket driver included• 5/16” depth locator assembly incl.• Ramp-Off depth locator• 10’ 2 wire Quick-Lok® included• 6.5 AMP motor

DEWALT® 1/2” Impact WrenchNo. DW292 Description

• Forward / Reverse Rocker Switch• 325 Ft - Lbs of Torque• Detent Pin• 2700 BPM• 7.5 AMP Motor

Milwaukee® 1/2”Impact Wrench

No. 9070-20 Description• 300 ft. / lbs. torque• Pin detent socket extension

MAKITA® 1/2”Impact WrenchNo. Description6905B • 217 ft/lbs of torque

• 4 Amp. motor• 1/2” - 3/4” bolt size

MAKITA® 3/4”Impact WrenchNo. 6906 Description

• 433 ft/lbs of Torque• 5/5” - 7/8” bolt size• 9 Amp. Motor• With Case

DEWALT® 7 1/4” Circular Sawwith High Strength Base

No. DW369CSK Description• New base design• 560 beveling capacity• With spindle lock• 24T carbide blade• Electric brake• 15 AMP motor

DEWALT® 7 1/4” Circular SawNo. DW368K Description

• 560 beveling capacity• 24T carside blade• With spindle lock• 15 AMP motor

DEWALT® 8 1/4” Circular Sawwith Rear Depth of Cut

No. DW384 Description• 500 beveling capacity• Alum, alloy base• Electric brake• 24T carbide blade• With spindle lock• 15 AMP motor

DEWALT®

7 1/4”Framing SawNo. DW378G Description

• 500 beveling • Alum, alloy base• 24T carbide blade• With spindle lock• 15 AMP motor

Milwaukee® 7 1/4” Circular SawKit

No. Description6390-21 • Tilt lok main handle

• Blade right• Spindle lok button• Bevels to 50º • Comes with case & carbide blade

6394-21 • As above plus electric brake

Milwaukee® Worm DriveCircular Saw

No. Description6377-6 • 7 1/4” blade left6378 • 8 1/4” blade left

146

PO

WER

TO

OLS

CO

RD

ED 1

0

�

BOSCH® 10” Dual-Bevel SlidingMiter Saw

No. 4410L Description• W/ up front controls• Arbor mounted laser tracking• Dual sliding rail design• Electric brake • 15 Amp. motor• w/ 60T carbide blade• Includes dust bag

BOSCH® 12” Dual-Bevel SlideMiter Saw

No. 5412L Description• W/ up-front controls • Arbor mounted laser tracking• Dual sliding rail design• Electric brake • 15 Amp. motor• w/ 60T carbide blade• Includes dust bag

Milwaukee® Miter SawNo. 6490-6 Description

• Miter override mechanism• With 10” carbide blade• Retracting blade guard• Saw head lock• Electric brake• Dust bag included

Milwaukee® Slide CompoundMiter Saw

No. 6497-6 Description• Machined slide mechanism• With 10” carbide blade• Miter override mechanism• High visibility bevel scale• Retracting blade guard• Saw head lock• Electric brake• Dust bag included

Milwaukee® Compound MiterSaw

No. 6494-6 Description• Miter override mechanism• With 10” carbide blade• High visibility bevel mechanism• Retracting blade guard• Saw head lock• Electric brake• Dust bag included

Milwaukee® Miter Saw StandNo. 48-48-0450 Description

• Fits all three saws

DEWALT® 10” Compound MiterSaw

No. DW703 Description• Tall sliding fence for

crown molding• 00 - 500 miter• 11 positive miter stops• 00 - 480 bevel• 40T carbide blade• Dust bag• 15 AMP motor

DEWALT® 12” Compound Miter Saw

No. DW705S Description• Extra tall sliding fence• 0 - 480 bevel & miter• 9 positive miter stops• 60 T carbide blade• Extension kit & bag• Electric brake• 15 AMP motor

BOSCH® /SKILL Circular SawsNo. Size DescriptionCS20 7 1/4” • Contractor saw, 15 AMP

• Direct connect cord system• Powerful blower clears dust

HO77 7 1/4” • Worm drive saw, 13 AMP• Direct connect cord system• Powerful blower clears dust

HO77M 7 1/4” • Worm drive, magnesium body

• Direct connect cord system• Powerful blower clears dust

HO5860 8 1/2” • Contract saw, 13 AMP

147

10P

OW

ER T

OO

LS CO

RD

ED

�

DELTA® 10” Contractor SawNo. 36-461Description• 1 1/2 HP, 120V, 282 lbs.• With 10” blade• Sturdy steel stand• Integral dust chute• Cuts 3 1/8” at 900

• Cuts 2 1/8” at 450

• Auto-Set miter gage• Extra-Large table• Up-Front blade controls• Large paddle switch

DELTA® TwinLaser 12” Mitre Saw

No. 36-255LDescription• 15 AMP, 120V, 63 lbs.• 12” 40T carbide blade• Retractable blade guard• Dust bag• Electric brake• Easy-Grip handle• 2 x 4 sawhorse mounting

DEWALT®

12” SlidingCompound Miter SawDouble Bevel DesignNo. DW706 DescriptionDW706 • Cross-cut capacity

of 12” at 900

• Miters 500 to the right• Miters 600 to the left• 00 - 480 bevel•11 Positive miter stops• Dual vertical rails• Electric brake• 60 T carbide blade• 15 AMP motor

DEWALT® 12”Miter SawSingle BevelDesignNo. DW715 Description

• 15 AMP, 4000 RPM motor• With 11 positive stops• 60 T carbide blade• Extension kit & dust bag• Bevels 00 - 480 to the left• Bevels 00 - 480 to the right• 00 - 500 left & right miter• Tall sliding fence• Horizontal capacity 6 1/2”

DEWALT® 12”CompoundMiter SawDouble Bevel Design No. DW716 Description

• 15 AMP, 3600 RPM motor• With 11 positive stops• 60 T carbide blade• Includes dust bag• Bevels 00 - 480 to the left• Bevels 00 - 480 to the right• Horizontal capacity 8”

DEWALT® 12” CompoundMiter Saw Double Bevel DesignNo. DW718 Description

• 15 AMP, 4000 RPM motor• With 10 positive stops• 60 T carbide blade• Includes dust bag• Bevels 00 - 480 to the left• Bevels 00 - 480 to the right• Horizontal capacity 16”

DELTA®

10” Compound Miter SawNo. MS250Description• 13 AMP, 120V, 28 lbs.• 10” 40T carbide blade• Retractable blade guard• Dust bag• Electric brake• Easy-Grip handle

DEWALT®

10” Table Saw No. DW744S Description

• With DW7440 stand• Telescoping fence for

up to 24 1/2” RIP capacity• Telescoping rails• Dust collector port• 3 1/8” depth of cut at 900

• 2 1/4” depth of cut at 450

• 24T carbide blade• 13 AMP motor

BOSCH® 10” Table SawNo. 4000TS Description

• Soft start• 25” rip cutting capacity• 3 1/8” depth or cut at 900

• 40T carbide blade• 14 Amp. motor

No. 4000-07 • Saw with folding stand

148

PO

WER

TO

OLS

CO

RD

ED 1

0

�

DEWALT® Air CompressorHand Carry Style

No.D55155 Description• 2.75 h.p., 61 lbs.• 4 gal tank• 4.5 CFM at 100PSI• 15 second recovery • Electric powered

DEWALT® Air CompressorWheeled Portable Design

No. D55270 Description• Honda gas engine powered• 8.9 CFM at 100 PSI• 5.5 HP• 8 gallon

DEWALT®

ThicknessPlanerNo. DW735 Description

• 1/8” Max depth of cut• 12 1/2” Max width• 2 speed• 13” three knife• Only 92 lbs• 6” Depth capacity• Comes with H.S.S. knives• 15 AMP motor

BOSCH® Jig Saw Top Handle Design

No. 1587AVSK Description• Multi-directional blade clamp• 4 stage orbital action• 3 position dust blower• Adjustable steel footplate• Tool free blade change system• With case• 5 Amp. motor

BOSCH® Jig Saw Body Grip Design

No. 1591EVSK Description• One touch blade change• Constant response circuitry• 4 position orbital action • Lock-on button• Soft grip handle• 6.4 Amp. motor• c/w carry case

Milwaukee® Orbital Jig SawsNo. Description6276-21 • Body grip style

• Variable speed control dial• Uses T-shank blades• Anti-splinter device• Plastic shoe cover• includes case, 6.2A motor

6266-22 • As above but D-handle style6268-21 • Cushion Grip D-handle style

• Vari-Speed Trigger• 0-3000 S.P.M.• 6.5 AMP motor• Includes carry case

DEWALT® Jig Saw Top Handle Design

No. DW321K Description• Keyless blade change• Keyless adjustable shoe• 4 - position orbital action• 1” stroke length• Variable speed• Adjustable dust blower • With 3 Blades & box• 5.8 AMP Motor

DELTA®

10” ProTable SawNo. 36-650Description• 1 1/2 HP, 120V, 234 lbs.• With 10” blade• Sturdy steel stand• Cuts 3 1/8” at 900

• Cuts 2 1/8” at 450

• Auto-Set miter gage• Large cast iron table• 30” rip capacity

BOSCH® Jig Saw Barrel Grip Design

No. 1584AVSK Description• Variable speed• Multi-directional blade clamp• Tool free blade change system • 4 stage orbital action• 3 position dust blower• Adjustable aluminum footplate • Rotating handle• With case• 5 Amp. motor

No.1590EVSK Description• One touch blade change• On/Off blower switch• 4 position orbital control • Variable speed trigger• Variable speed dial• Adjustable aluminum footplate • Lock-on button• 6.4 Amp. motor• c/w carry case

149

10P

OW

ER T

OO

LS CO

RD

ED

�

BOSCH® Reciprocating SawNo. RS20 Description

• w/ Direct Connect™ cord system• w/ Lockjaw blade change system• w/ on board work light• Variable 2-speeds• w/ soft grip handle• Soft grip boot• 1 1/4” stroke length• 13 Amp. motor• c/w carry case & saw hook

No. RS5 Description• w/ 360˚ scroll collar• Quick change blade change system• Variable speed trigger• Soft grip handle & boot• 1 1/8” stroke length• 9 Amp. motor• c/w carry case & saw hook

DEWALT® Reciprocating Saw No. DW304PK Description

• 10 AMP motor • 1 1/8” stroke• 0 - 2400 5PM• 4 position blade clamp, keyless• Fixed shoe• Inludes case

DEWALT® Reciprocating SawKit

No. DW307MK Description• 9.5 AMP motor• 1 1/4” stroke• 0 - 2800 SPM• Keyless blade clamp• Push button adjustable shoe• includes case

MAKITA® Reciprocating SawNo. DescriptionJR3050TY • 0-2800 RPM

• 9 AMP motor• 1 1/8” stroke• includes carry case

JR3060T • 0-2800 RPM• 12 AMP motor• 1 1/4” stroke• includes carry case (plastic)

JR3070CT • 0-2800 RPM• 15 AMP motor• 1 1/4” stroke• includes carry case (metal)

Milwaukee® Sawzall PlusNo. 6519-22 Description

• Quik - lok blade clamp• 10 AMP, 2800 SPM• 1” Stroke• Trigger speed control• Quik - lok cord• Includes case

Milwaukee® SawzallNo. 6509-22 Description

• Quik - lok blade clamp• 10 AMP, 2800 SPM• 3/4” stroke• Variable speed • Includes caseJR3070CT

Milwaukee®

Orbital Super-SawzallTM

No. 6523-21 Description• 360˚ rotating handle• 13 Amp motor• 0 - 3000 RPM• 1 1/4” stroke• With Quik-Lok cord• Includes Carrying Case

DEWALT® Deep Cut Band SawNo. D28770K Description

• 4 3/4” cut capacity• w/ speed control knob• use 44 7/8”x1/2x.020 blades• Case included

Milwaukee®

Deep CutBand SawNo. Description6232-6 • Trigger speed control

• Cuts 4 3/4” round• Cuts 4 3/4” x 4 3/4” square• 6 AMP motor• Includes case

6230 • As above with out case

Milwaukee® Orbital Super-SawzallTM

No. 6536-21 Description• 13 Amp motor• 0 - 3000 RPM• 1 1/4” stroke• With Quik-Lok cord• Includes case

150

PO

WER

TO

OLS

CO

RD

ED 1

0

�

DEWALT® 4 1/2” Small Angle Grinder

No. DescriptionD28112 • Trigger switch design

• 10 AMP, 11,000 RPM motor• AC / DC capacity• Quick change wheel release• Spindle lock• Spindle lock

D28402 • As above with paddle switch

4 1/2” Small Angle GrinderNo. DescriptionDW402 • 10,000 RPM

• AC / DC capacity• Paddle switch• Spindle lock• 5/8 - 11 spindle• 7.5 AMP motor

DEWALT® 4 1/2” Angle GrinderNo. DW802 Description

• 10,000 RPM• Paddle switch• Spindle lock• 5/8 - 11 spindle• 9 AMP motor

Milwaukee® 4 1/2” GrinderNo. 6148-6 Description

• With paddle switch• 5/8 - 11 Arbor

No. 1347A DescriptionSize 4 1/2” • 11,000 RPM

• Service minder brushes• 5/8” x 11” spindle• Lock on/off switch• Spindle lock• 6 Amp. motor

No. 1710 DescriptionSize 4 1/2” • 11,000 RPM

• w/paddle switch• Lock-on switch• AC/DC capability• Sealed switch• Service minder brushes• Epoxy coated field windings• 5/8” - 11” spindle• Tool Free adjustable guard• 7.5 Amp. Motor

BOSCH® Angle Grinder4 1/2” Size

No. 1375 Description• 11,000 RPM• Sealed switch• Epoxy coated field windings• Service minder brushes• 5/8” - 11” spindle• Lock on/off switch• Spindle lock• 6 Amp. motor

No. 1703EVS DescriptionSize: 5” • 11,000 RPM

• Variable speed dial• Constant response circuitry• Sealed switch• Epoxy coated field windings• Service minder brushes• 5/8” - 11” spindle• Spindle Lock• Tool Free adjustable guard• 8.5 Amp. motor

MAKITA® 4 1/2” Angle GrinderNo. 9527PB Description

• With paddle switch• 11,000 RPM• 6.4 Amp. motor• Spindle lock• Accessory kit

MAKITA® 4 1/2” Angle GrinderNo. 9527 NB Description9527NB • With thumb switch

• 11,000 RPM• 6.4 Amp. motor• Shaft lock• Accessory kit

MAKITA® 4 1/2” Angle GrinderNo. 9524NB Description

• Thumb switch• Shaft lock• 11,000 RPM• 5 Amp. motor• Accessory kit

WALTER® 4 1/2” Mini-Grinder No. Cat. Description30-A-161 6161 • 5/8" – 11 spindle

• 10,000 rpm• 8.0 amp motor• With “QUICK” wheel nut

WALTER® Mini-Plus GrinderTM

4 1/2"No. Cat. Description30-A-255 6255 • 5/8" – 11 spindle

• 3,000 - 10,000 rpm• 8.0 amp motor• With “QUICK” wheel nut

1375

1703EVS

1347A

1710

151

10P

OW

ER T

OO

LS CO

RD

ED

�

METABO® Angle Grinders 4 1/2” ,5” & 6” Sizes

All units include side handle, wheel guard,inner flange, and clamping nut

No. DescriptionW7 115 4 1/2” w/ Regular nut, 8AW10 125 5” w/ Quick nut, 8.5AWE9 125 5” w/ Quick nut, 7.5AWE14 125 5” w/ Quick nut, 12AWPS7 125 5” w/ Quick nut 8AW10 150 6” w/ Quick nut 8.5AWE14 150 6” w/ Quick nut 12A

DEWALT® 5” Angle GrinderNo. DW831 DescriptionDW831 • 10,000 RPM

• Spindle lock• 5/8 - 11 spindle• 12 AMP motor

BOSCH® Angle Grinder 5” SizeNo. 1711 Description

• 11,000 RPM• w/ paddle switch• Lock-on switch• AC/DC capability• Sealed switch• Service minder brushes• Epoxy coated field windings• 5/8” - 11” spindle• Spindle lock• Tool Free adjustable guard• 8.5 Amp motor

BOSCH® Angle Grinder 5” SizeNo. 1703EVS DescriptionSize: 5” • 11,000 RPM

• Variable speed dial• Constant response circuitry• Sealed switch• Epoxy coated field windings• Service minder brushes• 5/8” - 11” spindle• Spindle Lock• Tool Free adjustable guard• 8.5 Amp. motor

No. 1701 DescriptionSize: 5” • 11,000 RPM

• Lock on/off switch• AC/DC capability• Sealed switch• Service minder brushes• Epoxy coated field windings• 5/8” - 11” spindle• Tool Free adjustable guard• 9.5 Amp. motor

BOSCH® Tuckpoint GrinderNo. 1775E DescriptionSize: 5” • Specially designed guard

• With dust extraction port• Variable depth adjustment• Tool free blade access• Lock-on/off switch• With sealed switch• Service Minder™ brushes• Epoxy coated field windings• 5/8-11 spindle thread• 8.5 Amp motor• 4”-5” wheel dia.

1703EVS

1701

MAKITA® 5” Angle GrinderNo. 9015DB Description

• 10000 RPM• 5/8 - 11 spindle• 12.5 Amp. motor• Accessory kit• Paddle switch

MAKITA® 5” Angle GrinderNo. 9005B Description

• 10000 RPM• 5/8 - 11 spindle• 10 Amp. motor• Accessory kit

MAKITA® 5” Angle GrinderNo. 9565CV Description

• With electronic limiter• Variable speed• Spring clutch• 12 Amp. motor• Accessory kit

152

PO

WER

TO

OLS

CO

RD

ED 1

0

�

WALTER® DuronTM Grinder –5”No. Cat. Description30-A-350 6350 • 5/8" – 11 spindle

• 10,000 rpm• 12.0 amp motor• With lock-on paddle switch

WALTER® Big 6 GrinderTM - 6"No. Cat. Description30-A-260 6260 • 5/8" – 11 spindle

• 9,000 rpm• 12.0 amp motor• With “QUICK” wheel nut

WALTER® DuronTM Grinder – 6”No. Cat. Description30-A-360 6360 • 5/8" – 11 spindle

• 10,000 rpm• 12.0 amp motor• With lock-on paddle switch

WALTER® Super 5 - GrinderTM 5"No. Cat. Description30-A-150 6150 • 5/8" – 11 spindle

• 10,000 rpm• 8.5 amp motor• With “QUICK” wheel nut

METABO® 7” Angle GrindersNo. W23-180 Description

7” 8500 RP• Side handle, wheel guard• Clamping nut • Spanner wrench

METABO® 7” / 9” Angle SanderNo. W21-230 Description

7” or 9” 6000 RPM• includes side handle only

Milwaukee® 7” GrinderNo. 6088-20 Description

• 6000 RPM• Comes with 7” guard

WALTER®

Straight GrinderNo. Cat. Description30-A-145 6145 • 1/4" collet

• 2,500 - 6,000 rpm• 7.5 amps• Exclusive spindle lock

WALTER® DialspeedTM GrinderNo Cat. Description30-A-141 6141 • 1/4" collet

• 7,000 - 27,000 rpm• 6.2 amps• Exclusive spindle lock

WALTER®

Maxi-GrinderTM - 7"No. Cat. Description30-A-170 6170 • 5/8" – 11 spindle

• 8,500 rpm• 2,300 watts• Rotating rear handle

WALTER®

Maxi-GrinderTM - 9"No. Cat. Description30-A-190 6190 • 5/8" – 11 spindle

• 8,500 rpm• 2,300 watts• Rotating rear handle

MAKITA® 7” Angle Grinder No. GA7910 Description

• Accepts 7” or 9”• 5/8 - 11 spindle• 6000 RPM• 15 Amp. motor• Spindle lock

MAKITA® 7” SanderNo. GA7911 Description

• Accepts 7” or 9”• 5/8” - 11 xpindle• 6000 RPM• 15 Amp. motor

153

10P

OW

ER T

OO

LS CO

RD

ED

�

DEWALT® 7” Angle GrinderNo. D2847W Description

• was DW474• 6000 RPM• AC/DC capacity• Spindle lock• 5/8 - 11 spindle• 15 AMP motor

DEWALT® Die GrinderNo. DW887 Description

• 25,000 RPM• AC/DC capacity• Paddle switch• Precision 1/4” collet• 3 AMP motor

BOSCH® Angle Grinders 7”No. 1873-6 Description

• 6000 RPM • 5/8-11 spindle thread• Cup wheels to 5” dia.• Wire wheels to 5” dia.• 15 Amp motor• Weighs only 11.9 lbs

No. 1893-6 • Same as above but 9”

No. 1873-8 DescriptionSize: 7” • 8500 RPM Hi-Speed

• 5/8-11 spindle thread• Cup wheels to 4” dia.• Wire wheels to 4” dia.• 15 Amp motor• Weighs only 11.5 lbs

BOSCH® Die GrinderNo. 1215 Description

• 27,000 RPM• Lock-On switch• 1/8” - 14” collet capacity• Mounted points to 1” dia.• Polishing wheels to 2” dia.• Metal gear housing• 4.6 Amp. motor

MAKITA® BlowerNo. UB1101Description• Variable Speed 0-16 000 RPM• Air volume 98 CFM• 5.5 Amp motor• Air pressure capacity 22”• Weighs 3.8 lbs.

DELTA® Bench Grinder8” Industrial Slow Speed

No. 23-725Description • 8 AMP, 100 lbs.• Flexible work lamp• Spark guards• Eye shields• Tool rest• Wheel dresser• 2 wheels• Water tray• 1725 RPM

DEWALT® 8” Bench Grinder No. DW758 Description

• 3/4 HP induction motor• With 36 & 60 grit wheel• With eye shields• With tool rests• Cast iron base• 4.2 AMP motor

DEWALT® 6” Bench GrinderNo. DW756 Description

• 5/8 HP induction motor• With 36 & 60 grit wheels• With eye shields• With tool rests• Cast iron base• 4 AMP motor

MAKITA® 1/4” Die GrinderNo. 906H Description

• Aluminum housing• 1/4” collet size• 3 Amp. motor• 27,000 RPM

MAKITA® 1/4” Die GrinderNo. 906 Description

• Plastic housing• 1/4” collet size• 2 Amp. motor• 25,000 RPM

154

PO

WER

TO

OLS

CO

RD

ED 1

0

�

DEWALT® 14” Chop SawNo. DW870 Description

• 3800 RPM• 3.2 h.p., 36.3 lbs.• Steel base• 4” Max round• 4 X 7 3/4” rectangle• For abrasive wires• 15 AMP motor

DEWALT® 14” Multi-CutterChop Saw

No. DW781 Description• 40 lbs.• 15 AMP, 5.3 HP motor• Ergonomic “D” handle design• w/ Quick-Lock vise• Tool free adjustable fence

DEWALT® 14” Multi - Cutter Chop Saw

No. DW872 Description• 1300 RPM• 4 h.p., 47 lbs., 15 Amps• With 70T carbide blade• 5 3/16” round capacity• 6 1/2” x 4 1/2” rectangle

BOSCH® Chop SawNo. 3814 DescriptionSize: 14” • 3,900 RPM

• Lock-On switch• Spindle lock• 6” depth of cut•15 Amp. motor

Milwaukee® 14” Cut Off SawNo. 6176 Description

• Cast iron base

Milwaukee® 14” Dry Cut-Off Machine

No. 6190-20 Description• New dry cut technology• Cuts 3 times faster than abrasive

cut-off machine• Vitually no sparks or burrs• Quick release vise• W/14” 72T carbide blade• Makes quieter smoother cuts

MAKITA® Chop SawsNo. Description2414DB 14” Wheels2416S 16” Wheels

BOSCH® RandomOrbit Sander

No. 1295D DescriptionSize: 5” • 12,000 RPM

• Uses 8 hole hook & loop Standing disc

• Through the pad Dust extraction

• Microfilter dust canister • 2 Amp. motor

DEWALT® Random Orbit 5” Sander

No. DW421 Description• Accepts 5”, 8 hole hook

and loop paper• 2 Amp motor• 3/32 Orbit D.A.• With dust bag

and vac adapter• 12,000 OPM

155

10P

OW

ER T

OO

LS CO

RD

ED

�

DEWALT® Random Orbit Sander6” Right Angle

No. DW433 Description• Accepts 6”, 6 hole hook

and loop paper• 4,300 0 6,800 OPM• 3/16” orbit D.A.• With dust bag and side handle• 5.2 AMP motor

DEWALT® Belt Sander 3” x 21”No. DescriptionDW432 • Rubber grip reduces vibration

• Durable all metal housing• Two position front handle• Powerfull 8 AMP motor• Includes dust bag

DW433 • As above w/ Vari-speed

WALTER® Line-Mate 11TM

Drum SanderNo. Cat. Description30-A-268 6268 • 6,600 RPM

• 3/8 - 11 spindle• 15 Amp. motor• 9 disc. dia.

WALTER® Big-BuffTM

Sander/PolisherNo. Cat. Description30-A-265 6265 • Dial Speed Control

• 7,000 - 27,000 RPM• 1/4” Collett Dia.• 6.2 Amp. Motor

Milwaukee® 18 Gauge ShearNo. Description6850 • 18 Ga. (.0478”) steel

• 20 Ga. (.0355”) stainless • 360 swivel head• Trigger speed control• Cut 15’ per minute

DEWALT® ShearsNo. DescriptionDW892 •14 guage

• Aluminum alloy gear case• Powerfull 3 AMP motor• Paddle switch operation• Cut radius as small as 1”

DW8920 • Blade kit only for above

No. DescriptionDW893 • 12 guage

• Aluminum alloy gear vase• Powerfull 6.5 AMP motor• Paddle switch operation• 4 edge blade style• Cut radius as small as 1”

DW8930 • Blade for DW893

DEWALT®

18 Gauge Shearwith 3600

Swivel HeadNo. DescriptionDW890 • Steel to 18 GA

• Stainless steel to 20 GA• Vari - speed• Cuts 7/ 32” strip• Cuts radius of 5 1/2” and larger• 5 AMP motor

DW8999 • Left blade onlyDW8901 • Center blade onlyDW8900 • Right blade only

BOSCH®

UnishearNo. 1500C DescriptionGuage: 16 • 5000 RPM

• 14 Ga. aluminum• 16 Ga. steel• 20 Ga. stainless• Lock-On/Off switch• Upper/Lower blades can

be rotated 4 x 90O

• 7/8” min. radius• 4.2 Amp motor

BOSCH® NibblersNo. 1529B DescriptionGuage: 18 • Paddle switch

• 3-Position head•.080 aluminum• 18 GA. steel• 20 GA. stainless• 1 9/16” cutting radius• 3.2 Amp. motor

No. 1530 DescriptionGuage: 14 • Alum. to .100”

• Steel to 14 GA.• Stainless to 16 GA.• 1 3 /16” cutting radius• 4.6 Amp. motor

156

PO

WER

TO

OLS

CO

RD

ED 1

0

�

Milwaukee® MagneticDrill Press

No. 4206-1 Description• With 4262-1 motor• With 4203 base• 3/4” drill capacity• 1” tap capacity• 350 RPM

No. 4208-1 Description• With 4297-1 motor• With 4203 base• 1 1/4” drill capacity• 1 1/4” tap capacity• 500/250 RPM

No. 4210-1 Description• With 4262-1 motor• With 4202 base• 3/4” drill capacity• 3/4” tap capacity• 350 RPM

Milwaukee® Wet/Dry VacuumCleaner

No. 8925 Description• 16” dia tank• 15 gallon capacity• Comes with Drain valve• Suction 134” of water• Stainless steel tank• Accessories required

Milwaukee® Wet/Dry VacuumCleaner

DescriptionNo. 8912 • 16” dia tank

• 11 gallon capacity• Suction 134” of water• Steel tank• Accessories required

No. 8911 • As above with suction84” of water.

Milwaukee®

DiamondDrilling Rig(Small Base Stand with Vac. Pump)No. 4115-22 Description

• Small base stand (4115)• Vac pump (49-50-0200)• Vac pad (49-50-7100)• Meter box (48-51-0120)• Coring motor (4096)• Water tank & hose extra

Milwaukee®

Diamond DrillingAccessoriesNo. Description49-76-0055 • 3 1/2” gallon water tank49-18-0055 • 8’ water hose48-51-0120 • 20 AMP meter box49-90-0200 • Vacuum pump49-22-7100 • Vac. pad assembly48-70-0060 • Water collector ring

Milwaukee®

DiamondDrilling Rig

(Large Base Stand With Vac. Pump)No. 4120-22 Description

• Large base stand (4120)• Vac. pump (49-50-0200)• Meter box• Coring motor (4096)

Milwaukee® CompactMagnetic Drill Press

No. 4270-21 Description• Weights 26.5 lbs.• 450 RPM• 1/2” Max. drill capacity• 1/2” Max. annular cutter• Includes case, safety strap

and spray bottle