Plantilla para hacer agujeros para espigas en uniones de madera
2
Woodsmith Tips Build this Shop-Made Doweling Jig Drilling centered, consistent holes is crucial for dowel joints. While you can purchase a doweling jig, I made my own, as in the photo below. The jig is made up of five basic parts. The drilling guide is a piece of hardwood with a few centered holes that match common dowel sizes. A pair of ½"-thick fences are attached to pivoting spacers. Page 1 of 2 Build this Shop-Made Doweling Jig — Woodsmith Tips 05/06/2011 http://www.woodsmithtips.com/2011/06/02/shop-made-dowling-jig/?utm_source=Woods...
Transcript of Plantilla para hacer agujeros para espigas en uniones de madera
Woodsmith TipsBuild this Shop-Made Doweling JigDrilling centered, consistent holes is crucial for dowel joints. While you can purchase a doweling jig, I made my own, as in the photo below.
The jig is made up of five basic parts. The drilling guide is a piece of hardwood with a few centered holes that match common dowel sizes. A pair of ½"-thick fences are attached to pivoting spacers.
Page 1 of 2Build this Shop-Made Doweling Jig — Woodsmith Tips
05/06/2011http://www.woodsmithtips.com/2011/06/02/shop-made-dowling-jig/?utm_source=Woods...
To use the jig, slip it over the end or edge of a workpiece. Then pivot the spacers until the fences are flat against the workpiece. A few strips of self-adhesive sandpaper keeps the jig from slipping.
©August Home Publishing Company
Page 2 of 2Build this Shop-Made Doweling Jig — Woodsmith Tips
05/06/2011http://www.woodsmithtips.com/2011/06/02/shop-made-dowling-jig/?utm_source=Woods...
