PÉROLA - MadeiraMadeira · PÉROLA •Ler atentamente e considerar todas as instruções antes e...
Transcript of PÉROLA - MadeiraMadeira · PÉROLA •Ler atentamente e considerar todas as instruções antes e...
1
Indústria de Móveis Bechara Nassar Eireli.Av. Bechara Nassar Frange, 113 | Jd. Brasília | CEP 15170-000
17 3272 9900 | 17 3272 9919 | Tanabi - São Paulo - Brasil
www.moveisbechara.com.br
Estante/Home theater stand 1750 x 1360 x 385mm
PÉROLA
IDENTIFICAÇÃO DAS PEÇAS / IDENTIFICACIÓN DE LOS COMPONENTES / PARTS IDENTIFICATION
Manual do Produto e Instruções para Montagem
Guía del Producto y Instrucciones de Montaje
Product Guide and Assembly Instructions
N.° IDQuantidadeCantidadQuantity
Descrição / Descripción / DescriptionDimensões (mm)
Dimensiones (mm)Dimensions (mm)
Base / Base / Base 11360 x 384 x 25
Montante central / Soporte central / Middle Support 136 x 200 x 15
01
Divisória / Partición / Partition 360 x 350 x 15
1350 x 384 x 3Fundo / Panel trasero / Back Panel
A Móveis Bechara se reserva o direito de modificar desenhos e especificações de seus produtos sem aviso prévio.Móveis Bechara se reserva el derecho a modificar los diseños y las especificaciones de sus productos sin previo aviso.Móveis Bechara reserves the right to modify designs and specifications of its products without notification.
© Desenvolvimento e Projeto de Produto - Móveis Bechara. Proj. 734, Ed. 001 - Jul./2019.
VISTA TRASEIRA / VISTA POSTERIOR / REAR VIEW
Lateral esquerda / Panel lateral izquierdo / Left Side Panel
Tampo / Tablero / Top Panel 1356 x 288 x 25
-Rodízio RD60 cromado, com trava / Rueda RD60 cromada, con freno / Chromed Caster RD60, with lock
Lateral direita / Panel lateral derecho / Right Side Panel
Porta deslizante / Puerta deslizante / Sliding Door 680 x 350 x 15
360 x 382 x 15
360 x 382 x 15
-Rodízio RD60 preto, sem trava / Rueda RD60 negra, sin freno / Black Caster RD60, without lock
01
Prateleira central / Repisa central / Middle Shelf 1360 x 384 x 15
Painel inferior / Panel inferior / Lower Panel 1358 x 424 x 15
Prateleira móvel / Repisa extraíble / Removable Shelf 655 x 340 x 15
Perfil-trilho de plástico 1324mm / Perfil carrile de plástico 1324mm / Plastic rail profile 1324mm -
350 x 128 x 2,8Aplique decorativo / Placa decorativa / Decorative plate
102
103
104
105
106
107
108
1
09
1
10
1
11
2
12
2
13
3
14
1
15
02 0304
05
0607
11
17
17
18 19
18
19 18
19
19
20
16
17
18
19
20
Painel central / Panel central / Middle Panel 1358 x 424 x 15 1Painel superior / Panel superior / Upper Panel 1358 x 382 x 15 1Barra traseira / Barra trasera / Rear Bar 1324 x 92 x 15 2Coluna traseira / Columna trasera / Rear Column 1276 x 80 x 15 2
Prateleira superior / Repisa superior / Upper Shelf 1356 x 150 x 25 1
08
09
10
13
19
03
07
13
11
12
12
14
16 15
12
08
09
10
2
A
KIT DE ACESSÓRIOS E PARAFUSOS / KIT DE ACCESORIOS Y TORNILLOS / ACCESSORY AND BOLTS
100 20 30 40 50mm!
IMPORTANTE! Verificar as medidas dos parafusos na escala ao lado ou com uma trena antes de aplicá-los nas peças.
iIMPORTANTE! Verificar las medidas de los tornillos en la escala o con una cinta métrica antes de aplicarlos en las partes.
IMPORTANT! Check the measures of the bolts on the scale or with a measuring tape before applying them in parts.
Cavilha Ø6 x 30mm.
Clavija Ø6 x 30mm.
Dowel Ø6 x 30mm.
22 un.Parafuso 5,0 x 50mm cab. chata phs.
Tornillo 5,0 x 50mm cab. plana phs.
Bolt 5.0 x 50mm flat head phs.
19 un. 4 un. 6 un.
Prego 10 x 10.
Clavo 10 x 10.
Nail 10 x 10.
37 un.Parafuso 4,5 x 16mm cab. panela phs.
Tornillo 4,5 x 16mm phs.
Bolt 4.5 x 16mm phs.
C D
1 un.HTapa-furo adesivo (cor principal) .
Capa adhesiva (color principal).
Adhesive Cover (main color).
6 un.I
Tapa-furo adesivo (cor secundária) .
Capa adhesiva (color secundária).Adhesive Cover (secondary color).
B
J K 20 un.
Fita adesiva dupla-face (pedaços) .
Cinta adhesiva doble-cara (pedazos).
Double-sided adhesive tape (pieces).
Parafuso Minifix simples.
Tornillo Minifix simples.
Simple Minifix Bolt.
7 un.Tambor Minifix Ø12mm.
Tuerca Minifix Ø12mm.
Minifix Drum Ø12mm.
7 un.F G
Guia de plástico p/ porta deslizante.
Guía plástico para puertas deslizantes.
Plastic guide for sliding door.
E
Suporte-pino plástico Ø6 x 8mm.
Perno de plástico Ø6 x 8mm.
Plastic support-pin Ø6 x 8mm.
4 un.
FERRAMENTAS RECOMENDADAS / HERRAMIENTAS RECOMENDADAS / RECOMMENDED TOOLS
!IMPORTANTE! Ferramentas necessárias ou recomendadas para a montagem não inclusas e não fornecidas com o produto.
iIMPORTANT! Herramientas necesarias o recomendadas para la montaje no incluidas y no suministradas con el producto.
IMPORTANT! The required or recommended tools for assembly not included and not supplied with the product.
Parafusadeira com ponteiras fenda philips.Atornillador eléctrico con puntas philips.Electric screwdriver with philips tips.
Trena ou fita métrica
Cinta métrica.Measuring tape.
Martelo comum.
Martillo común.Simple hammer.
Chave de fenda simples e philips.
Atornillador simples y philips.Simple and philips screwdriver.
Estante/Home theater stand 1750 x 1360 x 385mm
PÉROLA
•Ler atentamente e considerar todas as instruções antes e durante a montagem e guardar este manual para consultas futuras. Recomenda-se duas pessoas para a montagem.
Para movimentar a estante montada, retirar equipamentos e objetos instalados no tampo, nas prateleiras e nos painéis da estante, aliviando o peso e evitando danos ao móvel e aos objetos.
Pisos desnivelados e irregulares comprometem a estabilidade e o esquadro do móvel, podendo danificar os rodízios e causar empenamento, deformação e outros problemas nas peças.
Certificar-se do nivelamento e da regularidade do piso em que o móvel será instalado, assegurando adequação de funcionalidade e de uso e a manutenção das condições de garantia do produto.
Não expor o produto à luz solar direta e à umidade. Para limpeza, utilizar flanela seca ou levemente umedecida em água. Não utilizar produtos químicos, abrasivos e solventes.
Não utilizar o móvel como assento ou como apoio para escalar o próprio móvel ou a parede. A Estante Pérola é adequada para TV LCD/LED/Smart de até 52" e peso de até 12kg a ser fixada
no painel, desde que observadas as especificações próprias destes aparelhos (suportes e parafusos para TV não inclusos). Pesos máximos recomendados : 15 kg na base; 12 kg no tampo; 10 kg na
prateleira central; 4 kg na prateleira móvel; 4 kg na prateleira superior; e 12 kg para TV no painel (considerando pesos estáticos, distribuídos uniformemente pela superfície das peças).
GARANTIA (Brasil): este produto tem garantia de 90 dias contra eventuais defeitos de fabricação, conforme Art. 26, inc. II do Código de Defesa do Consumidor. O direito à assistência técnica ou à
substituição do produto ou de partes dele, dentro do período de garantia, é assegurado desde que observadas as instruções de montagem, instalação e conservação constantes deste manual e mediante
a apresentação da Nota Fiscal de compra. O desgaste natural do móvel e problemas decorrentes de montagem incorreta e de uso inadequado não são cobertos pela garantia .
•Lea atentamente y considere todas las instrucciones antes y durante la montaje y guarde este guía del producto para futuras consultas. Se recomienda 2 personas para la montaje.
Para mover la estante, sacar objetos y equipos colocados en el interior o en la parte superior y repisas, reduciendo el peso y evitando daños al producto y equipos. Pisos fuera de nivel y irregulares ponga
en peligro la estabilidad y lo ángulo recto de la estante, o que puede dañar las ruedas y causar deformación y otros problemas en las piezas del producto. Asegúrese de la nivelación y regularidad de la
superficie en que el mueble será instalado, lo que garantiza adecuación de funcionalidad y uso y el mantenimiento de las condiciones de garantía. No exponga el producto directamente a la luz solar y la
humedad. Para la limpieza, utilice paño seco o ligeramente humedecido. No utilice productos químicos, abrasivos y solventes. No utilice la estante como asiento o como soporte para escalar el
propio mueble o la pared. Estante Pérola es adecuada para TV LCD/LED/Smart de hasta 52" y peso de hasta 12 kg a fijar en el panel (soportes y tornillos para TV no incluidos). Pesos máximosrecomendados: 15 kg en la base; 12 kg en el tablero; 10 kg en la repisa central; 4 kg en la repisa removible; 4 kg en la repisa superior; y 12 kg para TV en el panel (los valores indicados consideran
pesos estáticos, distribuidos uniformemente por la superficie de las piezas).
•Read carefully and consider all instructions before and during the assembly and keep this product guide for future reference. Two people are recommended for assembly.To move the assembled furniture, remove the materials and equipments put inside or on the middle board, the shelves or in the panels, decreasing weight and preventing damage to the product.Irregular or unleveled floors can leave the furniture to instability, which can damage the casters and maybe cause warping, distortion and others problems in the product parts. Make surre the levelingand regularity of the surface on which the product will be installed, ensuring accurancy and appropriateness of functionality and usage and maintaining warranty conditions. Don't expose the productto direct sunlight and humidity. For cleaning, use dry or slightly humid cloth. Don't use chemicals and abrasive products. Don't use the furniture as a seat or as steps to climb thefurniture itself or the wall. Recommended maximum weights : 15 kg on the base; 12 kg on the top panel; 10kg on the middle shelf; 4 kg on the removable shelf; 4 kg on the upper shelf; and upto 12 kg for TV on the panel. Supports and bolts for fixing the TV to the panel not included.
!
L
Cavilha Ø6 x 20mm.
Clavija Ø6 x 20mm.
Dowel Ø6 x 20mm.
8 un.
Cantoneira metálica com 3 furos .
Soporte de metal com 3 orificios .
Metal bracket with 3 holes.
18 un.Parafuso 3,5x12mm cab. flangeada phs.
Tornillo 3,5 x 12mm phs.
Bolt 3.5 x 12mm phs.
20 un.MParafuso 5,0x25mm cab. flangeada phs.
Tornillo 5,0 x 25mm phs.
Bolt 5.0 x 25mm phs.
N O 54 un. P
Tampa passa-fios Ø40mm.
Pieza de plástico Ø40mm para cables.
Plastic part Ø40mm for wires.
3 un.
3
PASSO 1 / PASO 1 / STEP 1
01
• Fixar a Lateral esquerda (02), a Lateral direita (03)
e a Divisória (04) na Base (01) com cavilhas (A) e
parafusos 5,0 x 50mm (B).
Fijar el Panel lateral izquierdo (02), el Panel
lateral derecho (03) y la Partición (04) en la
Base (01) con clavijas (A) y tornillos 5,0 x 50mm (B).
Fix the Left Side Panel (02), the Right Side Panel (03) and the Partition (04) on the Base (01) with
dowels (A) and bolts 5.0 x 50mm (B).
• Aplicar os suportes-pinos (E) na Lateral direita (03)
e na Divisória (04), para posterior instalação da
Prateleira móvel (16).
Aplicar soportes pinos (E) en el Panel Lateral
derecho (03) y la Partición (04), para después
instalar la Repisa extraíble (16).
Apply the supports (E) in the Right Side Panel (03)
and in the Partition (04), for later installation of
the Removable Shelf (16).
• Encaixar o perfil-trilho de plástico (17) no canal da
Base (01).
Insertar el perfil carrile de plástico (17) en el
canal de la Base (01).
Insert the plastic rail (17) into the channel of the
Base (01).
02
PASSO 2 / PASO 2 / STEP 2
PASSO 3 / PASO 3 / STEP 3
04
03
17
PREPARAÇÃO DA PORTA DESLIZANTE (05):
• Aplicar os deslizadores-guias de plástico (C).
• Fixar o Aplique decorativo (20) na face externa da
Porta (05) com fita adesiva dupla-face (D).
PREPARACIÓN DE LA PUERTA DESLIZANTE (05):
• Insertar los guías plásticos (C).
• Fijar la Placa decorativa (20) en la face
externa de la Puerta (05) con cinta adhesiva doble cara (D).
PREPARING THE SLIDING DOOR (05):
• Apply the plastic guides (C).
• Fix the Decorative Plate (20) on the outer face of the Sliding Door (05) with the double-sided
adhesive tape (D).
• Fixar o Montante (06) na Prateleira central (07) com
cavilhas (A) e parafuso 5,0 x 50mm (B), aplicando-os
nas posições indicadas no desenho.
Fijar el Soporte central (06) en la Repisa central
(07) con clavijas (A) y tornillo 5,0 x 50mm (B), aplicandolos en las posiciones indicadas en el
deseño.
Fix the Middle Support (06) on the Middle Shelf (07)
with dowels (A) and bolt 5.0 x 50mm (B), applying them in the positions shown in the drawing.
• Encaixar o perfil-trilho de plástico (17) no canal
debaixo da Prateleira central (07).
Insertar el perfil carrile de plástico (17) en
el canal debajo de la Repisa central (07).
Insert the plastic rail (17) into the channel under
the Middle Shelf (07).
• Aplicar os parafusos Minifix (F) sob a Prateleira (07).
Aplicar tornillos Minifix (F) en la Repisa (07).
Apply the Minifix bolts (F) under the Middle Shelf (07).
D
D
D
0520
06
07
17
07
17
DETALHE 1DETALLE 1DETAIL 1
Estante/Home theater stand 1750 x 1360 x 385mm
PÉROLA
4
PASSO 4 / PASO 4 / STEP 4
01
FIXAÇÃO DA PRATELEIRA CENTRAL (07) E INSTALAÇÃO DA
PORTA DESLIZANTE (05):
• Aplicar as cavilhas (A) nas Laterais (02) e (03) e na Divisória (04).
• Instalar a Porta deslizante (05), encaixando os deslizadores-guias
(C) nos trilhos (17).
• Finalizar a fixação da Prateleira central (07) nas Laterais (02) e
(03) e na Divisória (04) com cavilhas (A) e dispositivos Minifix
(F+G) e aplicar os tapa-furos (I).
FIJACIÓN DE LA REPISA CENTRAL (07) Y
INSTALACIÓN DE LA PURTA DESLIZANTE (05):
• Aplicar las clavijas (A) en los Paneles laterales (02) y
(03) y en la Partición (04).
• Instalar Puerta (05), encajandola en los carriles (17).
• Finalizar la fijación de la Repisa central (07) en los
Paneles laterales (02) y (03) y en la Partición (04) con
clavijas (A) y dispositivos Minifix (F+G) y, después,
aplicar las capas adhesivas (I).
FIXING THE MIDDLE SHELF (07) AND INSTALLING THE DOOR (05):
• Apply the dowels (A) in the parts (02), (03) and (04).
• Install the Door (05), by attaching it into the rails (17).
• Finish the fixing the Middle Shelf (07) in the Side Panels (02) and
(03) and in the Partition (04) with the dowels (A) and the Minifix
hardware (F+G) and then, apply the adhesive covers (I).
02
PASSO 6 / PASO 6 / STEP 6
04 03
17
0607
05
Estante/Home theater stand 1750 x 1360 x 385mm
PÉROLA
08Face traseira
Face posteriorRear face
10Face traseira
Face posteriorRear face
11
• Forrar o piso com o papelão e a isomanta da embalagem,
para proteger as peças, e dispor o Painel inferior (08), o
Painel central (09) e o Painel superior (10) com a face traseira
voltada para cima, verificando corretamente a posição de
cada um conforme os furos e o desenho.
Forre el piso con cartón y isomanta de empaque,
para proteger las piezas y organizar el Panel inferior
(08), el Panel central (09) y el Panel superior (10)
con la face posterior hacia arriba, observando
correctamente la posición de cada uno de
acuerdo com los orifícios y con el diseño.
Line the floor with the cardboard and the foam
mantle of the packing to protect the parts
and arrange the Lower Panel (08), the
Middle Panel (09) and the Upper Panel (10)
with the rear face upwards, checking correctly
the position of each part according to the holes and the drawing.
• Posicionar as barras traseiras (11) com a face pintada
voltada para frente [para os Painéis (08), (09) e (10)],
e fixá-las aplicando as cavilhas (L) e os parafusos (M).
Posicionar las Barras traseras (11) con la face pintada
hacia adelante [para los Paneles (08), (09) y (10)] y
fijarlas aplicando las clavijas (L) y los tornillos (M).
Position the Rear Bars (11) with the painted side facing forward [for the Panels (08), (09) and (10)] and fix them
applying the dowels (L) and the bolts (M).
BORDA INFERIOR / BORDE INFERIOR / LOWER EDGE
09Face traseiraFace posterior
Rear face
11
02
0305
18
18
19
19
19
01Face inferior.Face inferior.Lower face.
PASSO 5 / PASO 5 / STEP 5
• Fixar os rodízios (18) e (19) sob a Base (01) com os
parafusos 4,5 x 16mm (K), nas posições indicadas no desenho.
Aplicar 4 parafusos em cada rodízio. Fijar las ruedas (18) y (19) debajo de la Base (01) con
los tornillos 4,5 x 16mm (K), en las posiciones mostradas
en el deseño. Aplicar 4 tornillos en cada rueda.
Fix the casters (18) and (19) under the Base (01) with the
bolts 4.5 x 16 (K), in the positions shown in the drawing. Apply 4 bolts to each caster.
06 07
5
PASSO 7 / PASO 7 / STEP 7
Estante/Home theater stand 1750 x 1360 x 385mm
PÉROLA
08Face traseiraFace posterior
Rear face
BORDA INFERIOR / BORDE INFERIOR / LOWER EDGE
09Face traseira
Face posteriorRear face
10Face traseira
Face posteriorRear face
11
12
12
• Posicionar as Colunas traseiras (12),
alinhando-as pela borda inferior do
Painel (08) e junto às extremidades
das Barras traseiras (11) e fixá-las
com cantoneiras (N) e parafusos (O).
Colocar Columnas traseras (12),
alineándolas por el borde inferior
del Panel (08) y junto a las
extremidades de las Barras
traseras (11) y fijarlas con los
soportes (N) y tornillos (O). Position the Rear Columns (12) by
aligning them with the lower edge of
the Panel (08) and near the ends of
the Rear Bars (11) and fix them with
metal brackets (N) and bolts (O).
DETALHE 2DETALLE 2
DETAIL 2
11
PASSO 8 / PASO 8 / STEP 8
• Fixar a Prateleira superior (14) no Painel
superior (10) com cavilhas Ø6 x 30mm (A) e
parafusos 5,0 x 50mm (B).
Fijar la Repisa superior (14) en el Panel
superior (10) con clavijas Ø6 x 30mm (A)
y tornillos 5,0 x 50mm (B).
Fix the Upper Shelf (14) in the Upper Panel
(10) with dowels Ø6 x 30mm (A) and bolts 5.0 x 50mm (B).
• Fixar o Tampo (13) no Painel inferior (08)
com parafusos 5,0 x 50mm (B).
Fijar el Tablero (13) en el Panel inferior (08) con tornillos 5,0 x 50mm (B).
Fix the Top Panel (13) in the Lower Panel (08)
with bolts 5.0 x 50mm (B).
14
13
10Face traseira
Face posteriorRear face
09Face traseira
Face posteriorRear face
08Face traseira
Face posteriorRear face
12
12
11
11
6
PASSO 9 / PASO 9 / STEP 9
PASSO 10 / PASO 10 / STEP 10
08
15
08Face inferior.Face inferior.Lower face.
Estante/Home theater stand 1750 x 1360 x 385mm
PÉROLA
• Aplicar o parafuso Minifix (F) no furo central da face
inferior do Tampo (13).
Aplicar el tornillo Minifix (F) en el orifício central
debajo del Tablero (13).
Apply the Minifix bolt (F) into the central hole in the
underside of the Top Panel (13).
• Aplicar cavilhas Ø6 x 30mm (A) no topo superior do
Montante (06) e no topo inferior do Painel inferior (08). Aplicar clavijas (A) en el borde superior del Soporte
(06) y en el borde inferior del Panel inferior (08).
Apply dowels (A) in the upper edge of the Middle Support
(06) and in the lower edge of the Lower Panel (08).
• Posicionar todo o conjunto dos Painéis (08), (09) e (10)
e demais peças montadas nos PASSOS 6, 7 e 8 sobre o Suporte central (06) e a Prateleira central (07),
encaixando-os através das cavilhas (A) e fixar o Tampo
(13) no Suporte (06) aplicando o tambor Minifix (G) e
o Painel (08) na Prateleira (07) aplicando os parafusos
5,0 x 50mm (B) indicados.
Coloque el conjunto completo de los Paneles (08),
(09) y (10) y otras piezas montadas en los PASOS 6, 7 y 8 sobre el Soporte central (06) y la Repisa
central (07), encajándolos a través de las clavijas
(A), y fijar el Tablero (13) en el Soporte (06)
aplicando el tambor Minifix (G) y el Panel (08) en
la Repisa (07) con los tornillos (B) indicados.
Position the entire set os Panels (08), (09) and (10) and
other parts assembled on STEPS 6, 7 and 8 on the Middle
Support (06) and on the Middle Shelf (07), fitting them
through the dowels (A) and fix the Top Panel (13) to the
Middle Support (06) applying the Minifix drum (G) and
the Panel (08) to the Shelf (07) applying the indicated bolts 5.0 x 50mm (B).
• Fixar o Fundo (15) atrás da Base (01), das Laterais (02) e
(03), da Divisória (04) e da Prateleira (07) com pregos (J).
Fijar el Panel trasero (15) detrás de la Base (01), de
los Paneles laterales (02) y (03), de la Partición (04) y de la Repisa central (07) con clavos (J).
Fix the Back Panel (15) behind the Base (01), the Side
Panels (02) and (03), the Partition (04) and the Middle
Shelf (07) with nails (J).
• Encaixar as tampas (P) nos furos dos Painéis (08) e (09).
Insertar las capas (P) en los Paneles (08) y (09).
Insert the plastic parts (P) in the Panels (08) and (09).
• Instalar a Prateleira móvel (16), apoiando-a nos pinos (E)
aplicados na Lateral (03) e na Divisória (04).
Instalar la Repisa extraíble (16), apoyándola en
los soportes (E) aplicados en el Panel derecho (03)
y en la Partición (04).
Install the Removable Shelf (16) by supporting it on the
pins (E) applied to the Side Panel (03) and Partition (04).
06
02
05
16
01
03
14
09
10
12
07
1503
07
13 12
12
• Fixar as Colunas traseiras (12) na Prateleira central (07)
com cantoneiras metálicas (N) e parafusos 3,5 x 12mm (O).
Fijar las Columnas traseras (12) en la Repisa central
(07) con soportes metálicos (N) y tornillos (O).
Fix the Rear Columns (12) on the Middle Shelf (07) with
metal brackets (N) and bolts 3.5 x 12mm (O).
DETALHE 3DETALLE 3DETAIL 3
12
07
15
08
11
13
01