Taladradora de Pedestal
-
Upload
calama-arica-sao-paulo -
Category
Documents
-
view
215 -
download
0
Transcript of Taladradora de Pedestal
-
8/13/2019 Taladradora de Pedestal
1/2
R I V E N by means of I - h p . electric
motor this homemade drillpress builtmostly from old auto parts and a few itemsobtainable from your local dollar store issturdy accurate and smooth in operation.
cut-off portion from an axle housingis bolted to a brake drum which in turnis bolted to the bench top. The spindlebearing is a small grinder head and s
shown. The lower end of
-
8/13/2019 Taladradora de Pedestal
2/2
direct to the motor. In either case it is ad-visable to use a three-step pulley on themotor to provide speed adjustment. Ac-cessories such as the V-pulleys, belts andchuck can be obtained from almost any
For Lathe Operators
If you occasionally have a lathe job thatrequires resetting chucks frequently for
small work, this simple speed wrench willsave considerable time. It is nothing morethan an ordinary hand drill with th hu kremoved and the end of the shaft squaredto fit the chuck screws.
rpunches and chisels for model makerscan be had by grinding ice picks to shape,
Receptacle uilt in Workbench itExtinguishes Lighted Matcheso avoid fires being started by matches
thrown about his shop, after lighting gasburners and torches, one tinsmith installedthis receptacle. I tc o n s i s t s of alength of pipe runthroughthebenchtop to end in a pailor can underneatht h e b e n c h . Aflange at the uppere n d of t h e p i p eholds it in place.The lower end ofthe pipe must reston thebottom of thinto the pipe are
and when filled, ththe matches in the
w i r e r e m o