8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
1/42
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
2/42
PROCESO POR INMERSION EN CALIENTEPROCESO POR INMERSION EN CALIENTE
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
3/42
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
4/42
PROCESO POR INMERSION EN CALIENTEPROCESO POR INMERSION EN CALIENTE
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
5/42
PROCESO POR INMERSION EN CALIENTEPROCESO POR INMERSION EN CALIENTE
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
6/42
PROCESO POR INMERSION ENPROCESO POR INMERSION EN
CALIENTECALIENTE
• Hot dip galvanizing Molten zinc
• Degreasing Hot caustic
• Pickling Hydrochloric acid
• Pre-fluxing Zinc am. chloride
• Quenching Dichromate
• Loading - jigging
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
7/42
PROCESO POR INMERSION ENPROCESO POR INMERSION EN
CALIENTECALIENTELoading - jigging
The steel items need to be supported during the hot dipgalvanizing process.
Can the item be easily jigged?Will touch marks be a problem?
Solutions and molten zinc must be able to flow into allsections and drain off all sections.
Steel items must be designed to prevent air, solutions andmolten zinc becoming trapped
Check design for possible problems
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
8/42
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
9/42
PROCESO POR INMERSION ENPROCESO POR INMERSION EN
CALIENTECALIENTEDegreasing
A hot (90oC) caustic bath is used to remove -Oil, grease, paint another organic compounds
If these contaminating materials are not removed, the nextstage of the process (pickling) is affected
Check if any paint is on item - some paints are not easilyremoved and may require abrasive blasting before
galvanizing
Some pipes and pipe fittings have a black varnish coatingthat cannot be removed in the caustic bath.
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
10/42El baño alcalino caliente para desengrase
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
11/42
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
12/42
PROCESO POR INMERSION ENPROCESO POR INMERSION EN
CALIENTECALIENTE
Acid pickling
The steel items are immersed in hydrochloric acid toremove - rust, mill scale and other metal oxides
The steel surface must be perfectly clean of these oxidesfor the molten zinc to react with the steel
Very heavy rust may not be easily removed by pickling -badly rusted items should be abrasive blasted ormechanically cleaned first.
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
13/42
El Tanque de Decapado
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
14/42
PROCESO POR INMERSION ENPROCESO POR INMERSION EN
CALIENTECALIENTE
Pre-fluxing
Steel items are water rinsed after pickling and immersed inhot (70-80oC) zinc ammonium chloride (ZAC) solution.
The ZAC solution conditions the clean steel surface readyfor hot dip galvanizing.
Good pre-treatment = good quality galvanizing
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
15/42
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
16/42
PROCESO POR INMERSION ENPROCESO POR INMERSION EN
CALIENTECALIENTE
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
17/42
PROCESO POR INMERSION ENPROCESO POR INMERSION EN
CALIENTECALIENTE
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
18/42
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
19/42
PROCESO POR INMERSION EN CALIENTEPROCESO POR INMERSION EN CALIENTE
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
20/42
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
21/42
Al galvanizar el acero,
se interrelacionan el zinc
y el hierro formándose
capas con diferenteconcentración de los
metales.
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
22/42
La rotación a gran velocidad permite que
se desprendan los residuos de Zinc,
mejorando el acabado y garantizando el
correcto desempeo de la cuerda.
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
23/42
PROCESO POR INMERSION ENPROCESO POR INMERSION EN
CALIENTECALIENTEQuenchingAfter hot dip galvanized steel item is removed from thegalvanizing bath, it is immediately quenched in a sodiumdichromate solution
The dichromate quenching cools the item so that it can bequickly handled and conditions the surface of the
galvanized coating to maintain its bright appearance.
Chromate quenching will reduce white rusting problems.White rust forms when rainwater reacts with newly
galvanized steel to form zinc hydroxide.
Poor storage or HDG steel will also promote white rust.
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
24/42
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
25/42
PROCESO POR INMERSION ENPROCESO POR INMERSION EN
CALIENTECALIENTEHot dip galvanizing
The steel is immersed in molten zinc (temp 4500C)
The clean steel surface reacts with the molten zinc to form azinc-iron alloy which is very strongly bonded to the surface.
The hot dip galvanized coating forms in 3-5 minutes,depending on the steel thickness.
Galvanized coating
Steel
Free zinc layer
Micrograph - 100 X
Alloy layers
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
26/42
PROCESO POR INMERSION ENPROCESO POR INMERSION EN
CALIENTECALIENTECharacteristics• Typically 65 - 150 microns thick (1 mm = 1000 microns)
• Zinc iron alloy layers make up 80% - 100% of the coating.
• The zinc-iron alloy layers are harder than 250 grade steel
Steel
Zinc-iron alloys
Zinc
Micrograph of hot dip galvanized coating
PROCESO POR INMERSION EN CALIENTEPROCESO POR INMERSION EN CALIENTE
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
27/42
PROCESO POR INMERSION EN CALIENTEPROCESO POR INMERSION EN CALIENTE
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
28/42
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
29/42
GALVANIZADO EN CONTINUOGALVANIZADO EN CONTINUO
PROCESO POR INMERSION EN CALIENTEPROCESO POR INMERSION EN CALIENTE
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
30/42
PROCESO POR INMERSION EN CALIENTEPROCESO POR INMERSION EN CALIENTE
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
31/42
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
32/42
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
33/42
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
34/42
PROCESO POR INMERSION EN CALIENTEPROCESO POR INMERSION EN CALIENTE
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
35/42
PROCESO POR INMERSION EN CALIENTEPROCESO POR INMERSION EN CALIENTE
PROCESO POR INMERSION EN CALIENTEPROCESO POR INMERSION EN CALIENTE
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
36/42
PROCESO POR INMERSION EN CALIENTEPROCESO POR INMERSION EN CALIENTE
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
37/42
PROCESO POR INMERSION EN CALIENTEPROCESO POR INMERSION EN CALIENTE
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
38/42
PROCESO POR INMERSION EN CALIENTEPROCESO POR INMERSION EN CALIENTE
%inc en la In"raestructura
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
39/42
%inc en la In"raestructura!l Zinc prolonga en forma significativa la duración de los
productos de acero y las inversiones de capital tales como "asas Automóviles
#uentes $elecomunicaciones y transporte.
!stadios %nstalaciones portuarias &edes de electricidad y de distribución de agua
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
40/42
PROCESO POR INMERSION EN CALIENTEPROCESO POR INMERSION EN CALIENTE
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
41/42
PROCESO POR INMERSION EN CALIENTEPROCESO POR INMERSION EN CALIENTE
8/16/2019 Proceso Por Inmersion en Caliente Nov 2015 Parte 1
42/42
&arras
Mallas
'erra(es ) a!arras
Productos de refuerzo galvanizados
Top Related