(1): Observatori Fabra, Reial Acadèmia de Ciències i Arts de Barcelona
1
(1): Observatori Fabra, Reial Acadèmia de Ciències i Arts de Barcelona Fabra-ROA Baker-Nunn camera at Observatori Astronòmic del Montsec: an instrument update for space debris observation Fors O. (1,2), Montojo F.J. (3), Baena R. (2), Muiños J.L. (3), Núñez J. (1,2), Boloix, J. (3), Merino M. (1,2), Morcillo R. (3) Scientific project (3): Real Instituto y Observatorio de la Armada (ROA) (2): Departament d’Astronomia i Meteorologia i Institut de Ciencies del Cosmos (ICC), Universitat de Barcelona (UB/IEEC) Origins and refurbishment project Refurbishing process is finished. Telescope has been shipped at observing site (Observatori Astronòmic del Montsec). Telescope is ready to be commissioned at the beginning of September 2010. Most of remote and robotic features of the control software have already been tested. The following combination of instrumental specifications of the Fabra-ROA BNC provides unique efficiency to detect and track faint GTOs, GEOs and other space debris in a very short time: - Moderately deep limiting magnitude (V~20) with 30s integration time. - Huge FOV (4.4º x 4.4º) free of optical aberrations. - Capability of tracking simultaneously in RA and DEC at arbitrary rates. - Capability of triggering several times the CCD shutter at will during an exposure. - Preliminar (with non-colimated and unpolished lens) astrommetric accuracy of point-like objects is 0.25 arcsec. - Millimagnitude photometric accuracy is expected for point-like objects of 8<V<16. This accuracy has already been achieved by APT BNC (Hamacher et al. 2008) in the 8<V<14 range with a less sensitive and coarse pixel CCD. Mount Type Equatorial Motion RA and DEC Digital servo drives with arbitrary drift rate Optics Design Baker-Nunn design with field flattener and meniscus lenses Aperture 0.5m Focal ratio f/0.96 Scale 3.9 arcsec / pixel Mirror diameter 0.78m Field of view 4.4º x 4.4º Spot size 20µm Filter Schott GG475 Detector Sensor Kodak KAF-16803 Format 4Kx4K, 9µm QE 60% peak at 550nm Camera FLI PL16803 cooled with glycol (ΔT=65ºC) Specifications of post-refurbished Fabra-ROA BNC • This Baker-Nunn Camera (BNC) was commissioned at ROA (San Fernando) in the 60s by the Smithsonian Institution, with the aim of monitoring artificial satellites. • It was designed as a f/1 0.5m photographic wide field (5ºx30º) telescope with a spot size smaller than 20µm throughout the field. • During the 80s BNC cameras were superseded by new technologies (laser, radar and CCD) and it was donated to ROA, where it has been maintained inactive but in excellent state of conservation. • Three other BNC cameras have been already refurbished into equatorial, optically refigured and CCD-based facilities: APT at Siding Springs (Carter, B.D. et. al. 1992), Phoenix at AMOS (Law, B. et al. 2002) and NESS-T at RAO (Hildebrand, A., Mazur, M. & Cardinal R. 2004). • Thanks to these previous experiences we could speed-up and optimize the know-how learning curve of this complex refurbishment process. First technical light Commissioning schedule and space debris observation program anes and focus support CCD with flattener lens and glycol cooling Reinforced glass-fiber enclosure at Observatori del Montsec Realuminizated mirror with SiO 2 coating window of INDI-based control software in remote mode Manual telescope control in remote mode Pointing model with up to 13 coefficients First 4.4ºx4.4º technical image of M31 taken at testing site at San Fernando Observatory with unpolished lens and non- realuminizaed mirror. Contact: [email protected] More info: http://www.am.ub.es/bnc D) Design and construction of an enlarged version (12mx5mx4.5m) of Super-WASP reinforced-glass enclosure (made by GRPro, Inc.). It has turned to be very robust to weather conditions with no incidence to their mobile parts (the sliding roof and south gabling wall). A) Conversion of the telescope mount into equatorial. Motion of RA and DEC axis is geared with digital servo drives and feeded- back with absolute position encoders. B) Design and machine of a new spider vanes and focus system for the CCD. Support is athermal and focus is accurate to a 10µm. C) Design and manufacture of a CaF 64mm field flattener and 180mm fused silica ellipsoidal meniscus lenses to guarantee a 20µm spot size throughout a flat FOV of 6.25deg in diameter. E) First-time design of lens flattened corrected CCD (made by Finger Lakes Instrumentation, Inc.). The flattener lens was placed as close as 0.65mm to the CCD chip. The camera also included a new large aperture (90mm) shutter and glycol recirculation cooling. F) State-of-the-art control software (Elwood Downey, Clear Sky Institute, Inc.) based on INDI device communication protocol. It allows both remote and robotic control of every device in the observatory via Internet. Observing blocks are directly written in XML. Complex environmental conditions decisions are easily scriptable with Perl, bash or other languages. luminization and outermost 50cm lens repolishing. efurbishment process steps:
description
(3): Real Instituto y Observatorio de la Armada (ROA). (2): Departament d’Astronomia i Meteorologia i Institut de Ciencies del Cosmos (ICC), Universitat de Barcelona (UB/IEEC). (1): Observatori Fabra, Reial Acadèmia de Ciències i Arts de Barcelona. - PowerPoint PPT Presentation
Transcript of (1): Observatori Fabra, Reial Acadèmia de Ciències i Arts de Barcelona
(1): Observatori Fabra, Reial Acadèmia de Ciències i Arts de
BarcelonaFabra-ROA Baker-Nunn camera at Observatori Astronòmic del Montsec: an instrument update for
space debris observationFors O. (1,2), Montojo F.J. (3), Baena R. (2), Muiños J.L. (3), Núñez J. (1,2), Boloix, J. (3), Merino M. (1,2), Morcillo R. (3)
Scientific project
(3): Real Instituto y Observatorio de la Armada
(ROA)
(2): Departament d’Astronomia i Meteorologia i Institut de Ciencies del Cosmos (ICC), Universitat de Barcelona (UB/IEEC)
Origins and refurbishment project
Refurbishing process is finished. Telescope has been shipped at observing site (Observatori Astronòmic del Montsec). Telescope is ready to be commissioned at the beginning of September 2010. Most of remote and robotic features of the control software have already been tested.
The following combination of instrumental specifications of the Fabra-ROA BNC provides unique efficiency to detect and track faint GTOs, GEOs and other space debris in a very short time: - Moderately deep limiting magnitude (V~20) with 30s integration time. - Huge FOV (4.4º x 4.4º) free of optical aberrations. - Capability of tracking simultaneously in RA and DEC at arbitrary rates. - Capability of triggering several times the CCD shutter at will during an exposure. - Preliminar (with non-colimated and unpolished lens) astrommetric accuracy of point-like objects is 0.25 arcsec. - Millimagnitude photometric accuracy is expected for point-like objects of 8<V<16. This accuracy has already been achieved by APT BNC (Hamacher et al. 2008) in the 8<V<14 range with a less sensitive and coarse pixel CCD.
The following instrumental aspects will require special attention: - Flatfield for huge FOVs and fast systems (f/1) are challenging. - Focal length stability with temperature with an f/1 system will require calibration or monitoring.
MountType Equatorial
MotionRA and DEC Digital servo drives
with arbitrary drift rate
OpticsDesign Baker-Nunn design
with field flattener and meniscus lenses
Aperture 0.5mFocal ratio f/0.96
Scale 3.9 arcsec / pixelMirror diameter 0.78m
Field of view 4.4º x 4.4ºSpot size 20µm
Filter Schott GG475Detector
Sensor Kodak KAF-16803Format 4Kx4K, 9µm
QE 60% peak at 550nmCamera FLI PL16803 cooled
with glycol (ΔT=65ºC)
Specifications of post-refurbished Fabra-ROA BNC
• This Baker-Nunn Camera (BNC) was commissioned at ROA (San Fernando) in the 60s by the Smithsonian Institution, with the aim of monitoring artificial satellites.
• It was designed as a f/1 0.5m photographic wide field (5ºx30º) telescope with a spot size smaller than 20µm throughout the field.
• During the 80s BNC cameras were superseded by new technologies (laser, radar and CCD) and it was donated to ROA, where it has been maintained inactive but in excellent state of conservation.
• Three other BNC cameras have been already refurbished into equatorial, optically refigured and CCD-based facilities: APT at Siding Springs (Carter, B.D. et. al. 1992), Phoenix at AMOS (Law, B. et al. 2002) and NESS-T at RAO (Hildebrand, A., Mazur, M. & Cardinal R. 2004).
• Thanks to these previous experiences we could speed-up and optimize the know-how learning curve of this complex refurbishment process.
First technical light
Commissioning schedule and space debris observation program
Spider vanes and focus supportCCD with flattener lens and glycol cooling Reinforced glass-fiber enclosure at Observatori del MontsecRealuminizated mirror with SiO2 coating
Main window of INDI-based control software in remote mode Manual telescope control in remote mode
Pointing model with up to 13 coefficients
First 4.4ºx4.4º technical image of M31 taken at testing site at San Fernando Observatory with unpolished lens and non-realuminizaed mirror.
Contact: [email protected] More info: http://www.am.ub.es/bnc
D) Design and construction of an enlarged version (12mx5mx4.5m) of Super-WASP reinforced-glass enclosure (made by GRPro, Inc.).
It has turned to be very robust to weather conditions with no incidence to their mobile parts (the sliding roof and south gabling wall).
A) Conversion of the telescope mount into equatorial. Motion of RA and DEC axis is geared with digital servo drives and feeded-
back with absolute position encoders.B) Design and machine of a new spider vanes and focus system for the CCD. Support is athermal and focus is accurate to a 10µm.C) Design and manufacture of a CaF 64mm field flattener and 180mm fused silica ellipsoidal meniscus lenses to guarantee a 20µm
spot size throughout a flat FOV of 6.25deg in diameter.
E) First-time design of lens flattened corrected CCD (made by Finger Lakes Instrumentation, Inc.). The flattener lens was placed as
close as 0.65mm to the CCD chip. The camera also included a new large aperture (90mm) shutter and glycol recirculation cooling.
F) State-of-the-art control software (Elwood Downey, Clear Sky Institute, Inc.) based on INDI device communication protocol. It
allows both remote and robotic control of every device in the observatory via Internet. Observing blocks are directly written in XML.
Complex environmental conditions decisions are easily scriptable with Perl, bash or other languages.G) Mirror realuminization and outermost 50cm lens repolishing.
Refurbishment process steps:
