equipos_de_proteccion_personal.pdf

8/10/2019 equipos_de_proteccion_personal.pdf

1/33

PPE HELMETS

PROTECTIVE CLOTHING

BOOTS, GLOVESHEAT PROTECTION

1


2/33

2

HELMETS

Based on 15 years of experience with protective helmets, ROSENBAUER

developed the new fire fighting helmet in accordance with the

EN 443:2008.

With a considerable number of important details, the new

is one of the best fire fighting helmet systems world wide:

Certified as to EN 443:2008, helmet type B / 3b

High strength and impact resistance even at extremely high temperatures

Revolutionary helmet lamp system (optional at extra charge)

New inner lining provides maximum safety and excellent wearing comfort

Trapezoidal chinstrap for better stability

Easily adjustable helmet size from outside 2 Visors: large face shield and eye protector (eye protector optional

at extra charge, not available in France)

Helmet Shell

Completely newly developed glass fibre reinforced composite helmet shell

Designed for toughest requirements

Unique glass fibre reinforced plastic composite material

High strength and impact resistance at extremely high temperatures

Tested for structural fire fighting and fire container operations

Excellent mechanical strength in combination with equally high impactresistance (at low AND high temperatures)

Far greater energy absorption due to special impact resistance

modifications

: Sfety exteme stuts


3/33

13

1

PPE HELMETS, ProTEcTivE cLoTHing, BooTS, gLovES, HEaT ProTEcTion

itel fetues Individual adjustment of the wearing height, front and rear High-comfort padding for the prevention of pressure points during longer

operations made of NOMEX/Viscose FR (heat- and f lame-resistant,

sweat absorbent, machine washable)

Best possible hearing and heat sensitivity in combination with excellentear protection

Optimum weight distribution Previously unobtainable wearer comfort

Sze djustmet fm utsde Helmet size is easily adjustable from outside even when wearing gloves. The required setting can be changed quickly depending on the

operation.

Tpezdl hstp f stll bette stblty Ergonomic, optimised 3-point chinstrap

Made of flame- and heat-resistant NOMEX

For a stable fit

Integrated ear protection padding Washable

Msk tthmet compatible with all common breathing masks

vs: Extensive facial protection certified as to EN14458:2004

Suitable for wearers of spectacles (common sizes)

nek ptetHeat- and flame resistant

Helmet


4/33

4

156800

156801

156802

156804

156805

156806

156807

156808

HEroS-xte helmet etfed s t En 443:2008

HEroS-xte helmet

Comes complete with neck protection and face shield.

Weight: approx. 1,54 kg.

HEroS-xte helmet wthut ek ptet

Comes complete with face shield.


Order No. clu

156800 Luminous

156801 High visibility red RAL 2005

156802 High visibility yellow RAL 1026

156804 Blue RAL 5015

156805 Black RAL 9004

156806 White RAL 9016

156807 Silver RAL 9006

156808 Red RAL 3020

Order No. clu

15680026 Luminous

15680101 High visibility red RAL 2005

15680201 High visibility yellow RAL 1026

15680401 Blue RAL 5015

15680501 Black RAL 9004

15680601 White RAL 9016

15680701 Silver RAL 9006

15680801 Red RAL 3020


5/33

PPE HELMETS, ProTEcTivE cLoTHing, BooTS, gLovES, HEaT ProTEcTion 15

1

HEroS-xte s fully tested d pped dt En 443:2008 Helmet type B / 3b

C0158 notified body Exam/BBG

Additional testing: E2E3C***

E2E3 electric isolation C contact with liquid chemicals

*** -30 C

Sme equemets d t En 443:2008

Het dt 8 minutes

14 kW/m2= > 300 C helmet temperature

Shk bspt

Hemispherical striker 5 kg from a height of 2.5 m

In heated condition > 300 C helmet

temperature

Force transmitted to head < 15 kN

Peett

esste

Flat blade striker

1 kg from a heigt of 2 m

In heated condition > 300 C helmet

temperature

No contact with test head

Flme eulfmet

Flame engulfment 1.000 C / 10 sec

No afterburning < 5 sec

No dripping

Shock bsorptio

Peetrtio resistce

Flme egulfmet

Helmet

Sols 74/88

0736

08


6/33

6

remmeded aesses f :

Helmet tms (duble)

Made of 3M Scotchlite.

156864 Colour: red

156865 Colour: silver

156866 Colour: yellow

156867 Colour: blue

156854 Eye ptet le

Can be used together with the face shield. Eye protector is

suitable for wearers of spectacles (common sizes).

Unavailable in France.


15685401 Eye ptet tted

Unavailable in France.

15685101 Fe sheld ld ted, instead of standard visor

156862 clmp stp-set

For mask adaptions (please refer to page 23). Colour: white.


156871 ch ud

Made of leather

15684901Helmet lmp system

Revolutionary and extremely powerful Hi-tech LED beam.

Explosion-proof: Ex II 2 G Ex ib IIC T4. Life-time of LED up to

100.000 hours. The helmet lamp is easily detachable and can

also be used as a hand lamp. Comes complete with 3 AA

batteries. Weight: approx. 0,2 kg.

4033154 ate hed up

Thermal imaging helmet camera. Please refer to page 140.

15686802 all ud ek ptet

Model Holland, heat- and flame resistant.


15686902 PU ek ptet

Made of PU-coated cotton fabric

15687003Hed bd e l

Made of leather, instead of textile

cmmut systems:please refer to page 20.


7/33


1

16 03

02

09

06

11

10 / 10a

0813

14 / 14a

15 / 15a

01

17

04

05

12/

12a

07

156874

156843

156873 Ede ud

Mounted to the helmet shell, made of Silicone, black.

Flame and heat retardant.

Ptet hd

156874 made of NOMEX

156876 made of PBI

156843 Ste b

Made of Polypropylene, breathable.

Weight: 0,06 kg.

Spe Pts f :

n. Pt ode n.

01 Helmet shell

02 Mounting plate 156856

03 Front cover, black 156857

04 Adapter for mask with spring-clamp (1 pair) 156855

05 Adjustment knob 156861

Gearbox (without adjustment knob) 156860

06 Energy absorption device

07 Head net 15686303

Head net with hole for mounting of SAVOX COM unit 15686304

08 Helmet band 15685902

09 Head band 1568590310 Head band lining, made of textile 15687001

10a Head band lining, made of leather 15687002

Front part of the head band without lining 156875

11 Chin strap 156870

12 Neck protector 156869

12a Allround neck protector 15686803

13 Mask adapters / Clamping strips 15686201

14 Face shield clear 156850

14a Face shield gold coated 156851

15 Eye protector clear 15685402

15a Sun eye protector tinted 15685403

16 Helmet lamp 156849

17 Helmet trims red, double 1568640117 Helmet trims silver, double 15686501

17 Helmet trims yellow, double 15686601

17 Helmet trims blue, double 15686701

Harness complete with textile lining (07, 08, 09, 10, 11) 156863

Retrofitting set for helmet radio SAVOX 15686302

156858 Fx kt f impt cm (please refer to page 20.)

156859 Hed bd wth textle l

15685901Hed bd wth lethe l

156876

156858

156859

Helmet

156873


8/33

8

HEroS-XT

Based on 15 years of experience with protective helmets, ROSENBAUER

developed the new fire fighting helmet HEroS-XTin accordance with the

NFPA 1971, 2007 edition.

With a considerable number of important details, the new HEroS-XTis one

of the best fire fighting helmet systems word wide: High impact and penetration resistant helmet shell even at extreme

temperatures

Revolutionary helmet lamp system (optional at extra charge)

Ergonomic inner lining

Trapezoidal chinstrap for better stability

Easily adjustable helmet size from outside

Face shield and eye protection visor (eye protection visor optional

at extra charge, not available in France)

Unique glass fibre reinforced composite material

High strength and impact resistance at extreme temperatures

Tested for structural fire fighting under extreme conditions

Protective helmet for structural fire fighting in accordance withNFPA 1971,2007 edition

nFPa1971, 2007 editio


9/33


1

HEroS-XT helmet cErTiFiED aS To nFPa1971, 2007 edtcomes complete with ear covers (including limited neck protection), one

face shield and helmet trims.


remmeded aesses f HEroS-XT:

15689105 Eye ptet le

156849 Helmet lmp

156871 ch ud lethe

Spe Pts f HEroS-XTin compliance with NFPA 1971, 2007 edition

156890 Fe ptet

156891 Eye ptet

156893 E es / ek ptet

156894 Helmet tms yellw

156895 Helmet tms ed

156892 ch stp

Order No. clu

156880 White RAL 9016

156881 High visibility yellow RAL 1026156882 Yellow RAL 1018

156883 Red RAL 3020

156884 Black RAL 9004

156885 Luminous

156880

156882

156883

156884

156881

Helmet HEroS-XT


10/33

0

BonE conDUcTion coMMUnicaTion KiT iMPacT coM

Suitable for helmets and HEroS.

Microphone and speaker in one housing. Expansion bellows microphone on

the side of the head picks up speech. Large PTT (Push To Talk) switch, which

can also be pressed with underarm or elbow. Hands therefore remain free.

15665612 impt cm

with microphone and speaker in a single housing. Connection

cable with safety plug and PTT-button, without radio plug.

Weight: 0,12 kg.

Fx kt f impt cm

156858 made of leather, for HEROS-xtreme helmets

15668207 for HEROS helmets

rd-plus

156654 for ASCOM SE 110

15665401 for ASCOM SE 140 (FuG 11b)

15665402 for ASCOM SE 160

15665403 for BOSCH FuG 1015665404 for KENWOOD TH-22, TH-25, TK-240/340, TK-250/350

with plain cable

15665405 for MOTOROLA GP 300

15665417 for MOTOROLA GP 340

15665406 for MOTOROLA 12 pin plug

15665409 for MOTOROLA MX 1000/2000/3000 series,

Saber/ CQP 7000

15665410 for MOTOROLA VISAR

15665412 for MOTOROLA GP 900, not explosion-proof

othe d plus s well s iMPacT-coM expls-pf

equest.

SavoX coMMUnicaTion SYSTEM For :

Suitable for helmets .

156651 Helmet ut

Bone con microphone, 1 loudspeaker, connection cable and

safety plug for connection with PTT button

PTT butts wth d-plus

156652 SAVOX C-C500 with radio-plug for Motorola WARIS15665201 SAVOX C-C500 with radio-plug for Motorola GP 300

othe PTT butts wth d plus equest.

Helmet hess f use f SavoX cmmut System

15686301 instead of Standard harness

15686302 refitting set

Sw ek mmut kt up equest.

15665612

156651 15665201


11/33


1

Helmets

HEroS

The protective helmet system certified as to PPE diective89/686/EEC.

HEROS has been successfully used in 60 countries worldwidefor over 15 years. Designed for maximum comfort and

efficiency, the HEROS system provides a high level of safety.The helmet and accessories are coordinated for an optimum fit:

Helmet / mask combination

Headset Helmet light

Neck protection

Face shield

Pefet ptet d mxmum mft: Low weight: only approx. 1,3 kg.

Helmet shell made of polyamide / glass fibre reinforced

(not for luminous version)

Mxmum mft Helmet size adjustable from outside, also easy when wearing gloves.

The required setting can be changed quickly depending on the operation.

Individual wearing height setting.

Replaceable covers on the headband and middle part of the chin strap.

Neck padding completely replaceable.

optmum fe sheld & wde feld f ew Retractable face shield

Extremely wide field of view

APEK polycarbonate, anti-fogging on the inside and a scratch-resistant

coating on the outside (not for HEROS II)

Also suitable for wearers of spectacles (common sizes)

Msk tthmet possible with all common face pieces


12/33

2

HEroS d HEroS ii Helmet

HEROS: comes complete with neck protection, and visor.

HEROS II: like HEROS but with synthetic leather neck cushion and uncoated

visor, without edge protection.

Ptete helmet etfed s pe PPE dete 89/686/EEccE 0158.

HEroS HEroS ii clu

156623 156637 Red RAL 3000

156618 156638 Blue RAL 5015

156614 156635 White RAL 9016

156621 156636 Yellow RAL 1018

156628 156639 Black RAL 9004

156600 156630 Dyed through luminous

156628

156623

156614

156618

156600

156621

156636


13/33


1

Helmets

rEcoMMEnDED accESSoriES For HEroS anD HEroS ii HELMETS:

15667306 Full ek ptet Model Holland. Made of dark blue Zirpro-treated wool.


307854 Helmet lmp m UK4 aa

With XENON lamp. Please refer to page 237.

1566202 vel pth f fx the helmet lmp 307854 t thehelmets HEroS dA fleece lower part with a covering hook part. The hook part is

glued on the helmet shell and makes the connection to the

Velcro part with the helmet lamp. Replaceable.

Weight: 0,025 kg.

clmp stp f msk dptes156600000 mounted onto the helmet: Weight: approx. 0,04 kg.

4012301 as replacement set. Weight: approx. 0,04 kg.

Helmet tms

Made of 3M Scotchlite. Weight: 0,03 kg.

158110 Colour: red

158120 Colour: silver

158130 Colour: gold.15811002 Double, colour: red.15812002 Double, colour: silver.15813002 Double, colour: gold.

Msk adpte SetConsisting of 2 adapters and 2 clamping stripes. Weight: 0,11 kg.

401222 for Drger NOVA mask401224 for MSA-Auer 3S mask

40122401 for MSA-Auer Ultra Elite mask401226 for Interspiro mask

401216 for Sabre PANA SEAL mask

Msk adpteWeight: 0,08 kg.

401232 for Drger NOVA mask

401234 for MSA-Auer 3S mask40123401 for MSA-Auer Ultra Elite mask401236 for Interspiro mask

401215 for Sabre PANA SEAL mask

rd-Set

Please refer to page 20.

rEcoMMEnDED SParE ParTS For HEroS anD HEroS ii HELMETS:

nek ptet15667021 Made of silver Polyurethane. Weight: approx. 0,07 kg.15667019 Made of dark blue NOMEX. Weight: approx. 0,08 kg.

Fe sheld15667601 for HEROS, anti-fogging and scratch-resistant coating.

Weight: approx. 0,08 kg.15667603 for HEROS II, non coated. Weight: approx. 0,08 kg.

307854


14/33


15/33

25

1


141600

141610

105441

Stt We

STaTion WEar

133600 Stt we tuses

Designed for use at the fire station and for instruction

purposes only not for use in fire fighting operations! The

fabric comes in a blend of 65% Polyester and 35% Cotton, in a

245 g/m2material. One layer, unlined. Designed with 2 side

pockets, 1 back pocket and 2 patch pockets. Special pocket

for a mobile phone. Colour: navy blue.

Available sizes: European size 40 70; length B, C and D.

Weight (size M): 0,52 kg.

106650 Textle belt

35 mm wide. Strap buck. Colour: black.

Weight: 0,08 kg.

105167 Stt we Pl Sht

The fabric comes in a blend of 67% Cotton and 33% Polyester,

in a 190 g/m2material, without lettering or logo.

Colour: navy blue. Available sizes: S, M, L, XL and XXL.

Weight: 0,3 kg.

105164 Emblem embdeed (mpy l)Stitched onto the Polo Shirt, l/h breast side

105171 Stt we T-Sht

Made of 100% cotton, approx. 160 g/m2, without lettering or logo.

Colour: navy blue.

Available sizes: S, M, L, XL and XXL.

Weight: 0,1 kg.

105164 Emblem embdeed (mpy l)

Stitched onto the T-Shirt, l/h breast side

105441 Stt we p

Warm cotton knit, designed in six parts. Snap-tab back, so

one size fits all. Without lettering or logo.

Colour: navy blue.

Weight: 0,05 kg.

105442 Emblem embdeed (mpy l)

Stitched onto the cap

rain ProTEcTion WEar

Manufactured in accordance with EN 343:2003. Performance level 3/1.

Made of Nylflex, a double PVC-coated nylon material with good resistance

to hazardous liquids. Enormous tear resistance. The high-frequency welding

of the seams guarantees absolute water t ightness. Colour: yellow.

European sizes available: 46/48 (S), 50/52 (M), 54/56 (L), 58/60 (XL)

and 62/64 (XXL).

141600 r Ptet ct wth hd

Raglan-cut design with press stud closure, rain channel, back

yoke and two side pockets with flap. The coat features an

integral hood with draw cord. Weight: 0,9 kg.

141610 r Ptet Tuses

Bib type trousers with adjustable elastic suspenders.

Elasticised waist with studded gusset adjustment.

Side access slit. Weight: 0,8 kg.

106650

105167/105441

133600

105171/105441


16/33

6

TUrnoUT SUiTThis turnout suit is only one part of the personal protective equipment

stipulated by EN 469:2005. The CE labelling of this product (two-piece suit

and overalls) only denotes conformity with EN 469:2005 when the product is

used in conjunction with an appropriately tested protective jacket.

Material (for trousers and overall): blended fabric consisting of 35 % Aramide

fibre and 64 % Viscose FR (flame retardant), 1% Elasthan, 310 g/m2.

Lining: 35 % Aramide fibre and 65 % Viscose FR laminated with watertight,

windproof membrane, 170 g/m2.

Colour: navy blue as per RAL 5011. Turnout suits in colour green on request!

133100 Tu f tuut sut

Material: blended fabric consisting of 35 % Aramide fibre and

65 % Viscose FR (flame retardant), 300 g/m2.

Tunic with two patch pockets, golf pleat on back of tunic makes

for unimpeded freedom of movement, VelcroTMfastening for

cuffs and collar, 2 shoulder flaps.

Weight: 0,7 kg.

137820 Ptete tuses STrETcH f tuut sut

The trousers are completely lined. They have two patch pockets

and two thigh pockets. Reflective stripes, silver, 50 mm wide, on

back, chest, cuffs, and legs. Comes without belt.

Weight 0,90 kg.

137830 Ptete tuut ell STrETcH

Tunic with two patch pockets, golf pleat on back of tunic makes

for unimpeded freedom of movement, VelcroTMfastening for

cuffs and collar, 2 shoulder flaps. The trousers parts of the

overalls are completely lined. The trousers have two patch

pockets and two thigh pockets. Reflective stripes, silver, 50 mm

wide, on back, chest, cuffs, and legs. Comes without belt.

Weight 1,7 kg.

106650 Textle belt

35 mm wide. Strap buck. Colour: black.

Made of 100% Polypropylene.

Weight: 0,08 kg.

Laminated Lining:watertight, windproofPU-membrane with goodbreathing properties.Reinforcement Fabric:Aramide/Viscose.

Lining only for trousersand the trousers partsof the overalls.Approx. 165 g/m2.

Outer Fabric:35% Aramide, 64% Viskose FR,1 % Elasthan.Approx. 310 g/m2.

137830

EN 469:2005

Xf1

Xr1

Y2

Z2according to Oeko-tex Standard

100 No 30 295 Institut


17/33

27

1

Ptete clth


TUrnoUT SUiT FirE MaX iiCertified as to EN 469:2005.

The FIRE MAX II has been developed to offer maximum protection for thefire fighters while at the same time guaranteeing excellent comfort. It iscertified according to EN 469:2005, and achieved the highest protectionstandards in all three test categories: heat resistance, water repellence, and

steam penetration resistance.

FirE MaX ii - mde f PBiHh Pefme oute Fb

PBI Gold consists of 40 % PBI and 58 % Paraaramide (Kevlar) /

2 % antistatic fibre

PBI will not burn, melt, drip and embrittle

Fabrics remain supple even when charred

Best resistance to wear and tear

Fabric does not shrink or become brittle after exposure of heat and flame

Excellent resistance to chemicals and solvents

Sizes available: 44-46 to 60-64; three lengths: B (164 172), C (172 180)

and D (180 188).

141015 FirE MaX ii PBi jket

Backside length 89 cm (Size 52-54C)

Arm and jacket seams with moisture blocker made of flame

retardant PU coated Aramid, therefore better protection

against the penetration or soaking of water (anti-wicking

barrier)

Two breast pockets for radio, two side pockets with flaps

Two yellow/silver/yellow reflective stripes circulating body

and sleeves

For more details to the construction of the jacket,

please refer to page 28.

141025 FirE MaX ii PBi tuses Trousers with adjustable, non-detachable braces

Adjustable elastic straps for fixing the waistband individually

Trousers hem with flame retardant PU-coated Aramide

moisture blocker stops water before it enters into the

inner side of the trousers (anti-wicking barrier)

Yellow/silver/yellow reflective stripes circulating on the

trousers legs

For more details to the construction of the trousers,

please refer to page 29.

Lining: insulating layer ina 100 % aramid nonwovenand an Aramid/Viscosequilting approx. 270 g/m2

Moisture protection(Liner): PU-functionalmembrane water-,windproof and breathable

Outer Fabric: PBI goldapprox. 195 g/m2

Colour: gold

EN 469:2005

Xf2

Xr2

Y2

Z2


18/33

8

FirE MaX ii - mde f noMEX ToUgHCertified as to EN 469:2005

The FIRE MAX II has been developed to offer maximum protection for the fire

fighters while at the same time guaranteeing excellent comfort. It is certified

according to EN 469:2005, and achieved the highest protection standards in

all three test categories: heat resistance, water repellence, and steam

penetration resistance.

141010 FirE MaX ii jket

Backside length 89 cm (Size 52-54C)

Water- and windproof, breathable through PU membrane

Arm and jacket seams with moisture blocker made of flame retardant PU

coated Aramid, therefore better protection against the penetration or

soaking of water (anti-wicking barrier)

Special sleeve construction with mobility wedge for excellent mobility

Highly heat-resistant, stable zip with cover flap

Additional reinforcement at the elbows and shoulders made of PU-coated

Paraaramide fabric

Flame protection collar, on the backside to wear up to the helmet bottom,

closure with Velcro fastening at the front

Width of the sleeves can be adjusted individually due to Velcro

Sleeves with knitted wristlet made of Nomex

Two breast pockets for radio, two side pockets with flaps

Cord for adjusting around waist

Loops for mounting shoulder patches

Fleece strip above left radio pocket for name strip (15 x 3 cm)

Two yellow/silver/yellow reflective strips circulating body and sleeves

Weight: 2,2 kg.Size: please refer to page 32.

EN 469:2005

Xf2

Xr2

Y2

Z2

Additional reinforcement at elbows and sides Two breast pockets for radio

Moisture protection (Liner):PU-functional membraneWater-, windproof and breathable

Lining: insulating layer in a100 % aramid nonwoven and aAramid/Viscose quiltingapprox. 270 g/m2

Outer Fabric: 100 % AramidNOMEX Toughapprox. 195 g/m2

Colour: dark blue


19/33


1

Ptete clth

aesses f FirE MaX ii jket (ode n. 141015 d 141010):

140947 Pket

in covered front closure (Napoleon pocket)

1405966 nme stpes

detachable, approx. 15 x 3 cm.

Name the colour of the stripe and the lettering!

Lette the bk

Individual two line high silver-reflective lettering

140949 pted detly t the jket

140948 y blue vel

141020 FirE MaX ii tuses

Trousers with adjustable, non-detachable braces

Adjustable elastic straps for fixing the waistband individually

Quick-fix flies with zipper and Velcro with flap

Two side pockets with flap

Trousers hem with flame retardant PU-coated Aramide moisture

blocker stops water before it enters into the inner side of the trousers

(anti-wicking barrier)

Additional reinforcement at the knees, on the side and end of trousers

made of PU-coated Paraaramide fabric

Meta-Paraaramide changeable padding under the knee protection

Yellow/silver/yellow reflective strips circulating on the trousers legs

Weight: 1,7 kg.

Size: please refer to page 32.

Additional reinforcement at the knees, on the side and on the end of thetrousers


20/33

0

ProTEcTivE SUiT BrEgaCertified as to EN 469:2005.

Ergonomic and functional design for optimal freedom of movement. Water-

proof protective clothing by the use of high tech membranes and precise seam

sealing.

BrEga jket

Length of jacket: 91 cm (size 172-180 lenght C).

Water- and windproof, breathable Polyurethane vapour barrier membrane

Wide shoulder seams provide unlimited range of movement

Chest pocket for a radio or personal monitor and two side hip pockets

with flaps, Antenna strap on the right breast pocket

Flame protection collar on the backside to wear up to the helmet bottom,

at the front closure with Velcro fastening

Nomex knitwear wristlet: extend over the hands and are equipped with

thumb holes

15 x 3 cm fleece strip above the radio pocket for a name strip

45 x 10 cm fleece strip on wide reflecting yellow strips at the ends of the

jackets back side and around the end of the sleeves A parallel set of 5 cm wide stripes, Scotchlite reflective and high-contrast

yellow and silver, completely surround the base of the jacket and sleeve

ends

Weight: 1,5 kg.

14056236 BrEga jket, lu: y blue

14056217 BrEga jket, lu: yellw

(Outer Nomex fabric includes reflective silver stripes only)

BrEga tuses

Water-, windproof and breathable due to high performance membrane.

Rear trouser extension provides extra kidney protection, non removable

suspenders

2 side hip pockets with Velcro flaps

Trousers offer high freedom of movement, including a low-cut crotch seam

Highly heat-resistant zipper with cover flap

Changeable knee protection padding

Sewn-in elastic at ankles

A parallel set of 5 cm wide stripes, Scotchlite reflective and high-contrast

yellow and silver, completely surround the trousers legs just below the knees

Weight: 1,5 kg.

14056237 BrEga tuses, lu: y blue

14056218 BrEga tuses, lu: yellw(Outer Nomex fabric includes reflective silver stripes only)

remmeded aesses:

1405966 Dethble me stpes

3 x 15 cm on Velcro fastener, for affixing to the front of

the garment.

140635 Dethble et-eflete lette vel

Detachable silver retro-reflective lettering 10 x 45 cm with

text in two lines, on Velcro fastener, for affixing to theback of the garment.

Sizes: please refer to page 32.

Lining: insulating layer in a100 % aramid nonwoven andan Aramid/Viscose quiltingapprox. 270 g/m2

Moisture protection (Liner):PU-functional membraneWater-, windproof and

breathable

Outer Fabric: 100 % AramidNomex Toughapprox. 195 g/m2

14056217/14056218/140635

14056236/14056237

EN 469:2005

Xf2

Xr2

Y2

Z2


21/33


1

Ptete clth

ProTEcTivE SUiT FirE FiTCertified as to EN 469:2005.

Economical type turnout suit, consists of Jacket and Trousers.

14056010 FirE FiT jket

Length of jacket: 91 cm (size 172-180 length C).

Wide shoulder seams give plentiful freedom of movement.

Water-, windproof and breathable due to high performance membrane.

Highly heat-resistant, stable zip with cover flaps.

Two side hip pockets with flaps.

Flame protection collar, on the backside to wear up to the helmet

bottom, at the front closure with Velcro fastening.

Nomex knitwear wristlets extend over the hands.

5 cm wide silver stripes at the ends of the jackets back side and

around the end of the sleeves.

Weight: 1,75 kg.

14056020 FirE FiT tuses

High freedom of movement through a loose, especially low-necked

crotch seam.

Waterproof and breathable due to high performance membrane.

The back of the trousers is extended upwards, so as to provide

additional protection to the kidney areas.

On the trousers legs circulating, 5 cm wide silver stripes.

Weight: 1,5 kg.

Sizes: please refer to page 32.

Lining: insulating layer in a100 % aramid nonwoven andan Aramid/Viscose quiltingapprox. 270 g/m2

Moisture protection (Liner):PU-functional membraneWater-, windproof and

breathable

Outer Fabric: 100 % AramidNomex Toughapprox. 195 g/m2

EN 469:2005

Xf2

Xr2

Y2

Z2

14056010/14056020


22/33

2

LiST oF SiZES

List of sizes for FIRE MAX II, FIRE FIT and BREGA jackets

List of sizes for FIRE MAX II, FIRE FIT and BREGA trousers

List of size for Station wear tunic, turnout tunic and coverall

Leth 164-172 172-180 180-188

Chest width86-94

94-102

102-110

110-118

118-129

86-94

94-102

102-110

110-118

118-129

86-94

94-102

102-110

110-118

118-129

SizeXS

short

Ss

hort

M

short

Ls

hort

XL/

XXL

sh

ort

X

S S M

L

XL/

XXL

XS

long

S

long

M

long

L

long

XL/

XXL

lo

ng

Europeansize

44-46-B

48-50-B

52-54-B

56-58-B

60-64-B

44-46-c

48-50-c

52-54-c

56-58-c

60-64-c

44-46-D

48-50-D

52-54-D

56-58-D

60-64-D

Leth 164-172 172-180 180-188

Waist74-82

82-90

90-98

98-106

106-117

74-82

82-90

90-98

98-106

106-117

74-82

82-90

90-98

98-106

106-117

Size

XSshort

S

short

M

short

L

short

XL/XXL

short

XS S M L

XL/XXL

XS

long

S

long

M

long

L

long

XL/XXL

long

Europeansize

44-46-B

48-50-B

52-54-B

56-58-B

60-64-B

44-46-c

48-50-c

52-54-c

56-58-c

60-64-c

44-46-D

48-50-D

52-54-D

56-58-D

60-64-D

Leth 164-172 172-180 180-188

Waist66-70

70-74

74-78

78-82

82-86

86-90

90-94

94-98

9

8-102

102-106

106-111

111-117

66-70

70-74

74-78

78-82

82-86

86-90

90-94

94-98

9

8-102

102-106

106-111

111-117

66-70

70-74

74-78

78-82

82-86

86-90

90-94

94-98

9

8-102

102-106

106-111

111-117

Sizes40-B

42-B

44-B

46-B

48-B

50-B

52-B

54-B

56-B

58-B

60-B

62-B

40-C

42-C

44-C

46-C

48-C

50-C

52-C

54-C

56-C

58-C

60-C

62-C

40-D

42-D

44-D

46-D

48-D

50-D

52-D

54-D

56-D

58-D

60-D

62-D

Heht 164-172 172-180 180-188

Chest width78-86

86-94

94-102

102-110

110-118

118-129

78-86

86-94

94-102

102-110

110-118

118-129

78-86

86-94

94-102

102-110

110-118

118-129

Waist 66-74

74

-82

82

-90

90

-98

98-106

106

-117

66

-74

74

-82

82

-90

90

-98

98-106

106

-117

66

-74

74

-82

82

-90

90

-98

98-106

106

-117

Length ofones stride 7

474

74

74

74

74

78

78

78

78

78

78

82

82

82

82

82

82

Size

XXS

short

XSshort

Sshort

Ms

hort

Lshort

XL/XXLshort

XXS

XS S M L

XL/XXL

XXS

long

XSlong

Slong

Ml

ong

Llong

XL/XXLlong

Europeansizes

40-42-B

44-46-B

48-50-B

52-54-B

56-58-B

60-64-B

40-42-C

44-46-C

48-50-C

52-54-C

56-58-C

60-64-C

40-42-D

44-46-D

48-50-D

52-54-D

56-58-D

60-64-D

A ..Length

B . Waist measurement

C . Length of ones strideD . Chest measurement

Measurements in cm

A

D

B

C

Sze tble f FirE MaX ii, FirE FiT d BrEga jkets

Sze tble f FirE MaX ii, FirE FiT d BrEga tuses

Stt we tuses d tuut tuses

Stt we tu, tuut tu d ell


23/33


1

Bts

SYnTHETic SaFETY BooTS

Sfety bts

Meet the requirements of EN 20345:2006. Made of heavy-duty PVC.

Provided with sanitised-hygienic lining. Steel toe cap and steel plated

midsole for maximum protection. Sole with special slip resistant profile,

chemical resistant and antistatic.

Sizes: 38 47

Weight: 2,5 kg (size 42)

143210 clu blk

143220 clu yellw

143600 Fd Tuses rbust

Water-proof trousers made of special heavy duty 740 g/m2

polyester fabric, double coated. Grey colour. HF-heat sealed.

Reaches up to the armpits, to prevent water from entering the

trousers. Comes with suspenders and welded-on, safety type

PVC boots with slip resistant sole. Best features regarding tear

strength and chilliness. Also good consistence againstseawater, fuel oil and acids.

Boots: Sizes available: 40 - 48. Trousers: one size fits all.

Average weight: 4 kg.

143205 Elets bts

The upper part of the boot is entirely made of flame resistant

Nitrile rubber, and certified to comply with EN 20345-2

standard. Excellent resistance against chemicals. Provided

with sanitised lining. Steel toe cap and steel plated midsole

for maximum protection. The sole has a special slip resistant

profile, and is made of a blend of 70 % Nitrile rubber and 30 %

Hypalon rubber. The sole is limited chemical and flame resistant

up to 300 C, and is certified to be isolated up to 20.000 Volt,

with a maximum leakage current of 5 mA. Colour: black.

Sizes available: European size 37/38, 39, 40/41, 42, 43/44, 45.

Weight per pair: 2,2 kg (depending on size).

143204 Elet bts TST Sa 20.000 v, En 345 SBPE

Completely isolated under 20.000 V (sole and upper) in

conformity with the HTA 70 B specification of EDF (Electricit

de France).

Sizes available: European size 37/38, 39, 40/41, 42, 43/44, 45.

Weight per pair: 2,2 kg (depending on size).

143206 resue d wk cHUKKa bts

Certified as to EN 345-1:S3. Shaft made of water resistant,

full grain cow leather. Slip resistant polyurethane steel safety

midsole. Safety type steel toe.

Available sizes: European 38-47.

Weight: 1,4 kg.

143250 cheml ptet bts HaZMaX

Please refer to page72.

143210

143220

143600

143205

143206


24/33

4

LEaTHEr BooTS For FirE FigHTErS aS PErEn 15090:2006.

The bs essetl ll-ud ptet d pefet ft

Ergonomic, optimum freedom of movement, maximum shock-absorbing

properties and a high level of wearer comfort are united by the ROSENBAUER

boots. Test it and you will be delighted!

TWiSTEr LigHTning FaST, EaSY FiT!

144900 TWiSTEr, the ew fe fht bts wth the eluty

l system

Certified as to EN15090: 2006 HI3 CI SRA

Above all, fire fighting boots must provide protection against heat, cold,

flames, sparks and sharp objects however, they should also be easy to put

on quickly!

Therefore, ROSENBAUER has developed an absolutely novel lacing system for

fire fighting boots with the new TWISTER; as a result, the boot can be put on in

a flash. The boot adapts itself exactly to the individual foot shape and is

opened again at the press of a button.

nEW


25/33


1

Upper leather

Sympatex

membrane

Lining

wate

r

wind

bo

dymoisture

Bts

rbust d esy t e f

The new lacing system consists of a stainless steel rope that is laced

through the entire front portion of the boot using special guide parts.

simple to use, very robust

durable system (stainless steel rope)

extremely easy to clean

Hhest deee f ptet hhest weblty

A Sympatex membrane and hydrophobic waterproof leather make the

TWISTER essentially waterproof; the multilayer sole construction, inter-

stratified with air cushions, provides excellent resistance against heat and

cold. A steel insert in the sole as well as a steel cap in the toe area protect

your feet against injuries.

reinforced design in heel area for stability

comfort zone in buckling zone for long-term fatigue-free use

reflecting borders for increased safety in the dark

Pese ft d mftble ee du l pets

The special lacing system, combined with selected materials and ergonomi-

cally shaped parts, provides incomparable wearability: the lacing always adapts itself uniformly and precisely to your feet

can be readjusted easily at any time

special cushions on exposed areas (edge of steel cap, ankles, upper end

of boot)

open air- and water vapor-permeable mesh on upper end of boot

c be put d tke ff flsh

Fast, optimum adaptation of the boot to the foot is made possible by the

innovative BOA lacing system (BOA is a registered brand name of BOA

Technology Inc.).

Weight (per pair, German size 42) approx. 2640 g

Boot height (without sole, German size 42) approx. 260 mm

Width 10 (special widths upon request)

Available German sizes 36 50

Padded leg andedge-of-leg zone

Heat-resistant 3M reflectivestripes, silver

Carefully padded anklezone

Joint-supportive heelinsert

Moisture-regulating remo-vable and washable insertsole inlay

Leather insole, antibac-terial, moisture-regulatin

Sealing insole

Steel plated midsole

Metal band for electricdeflection

Nitrile air-cushion sole

Steel toe-cap

Rubber toe-cap

Steel cord

Polyamide guide elements

Push-and-turn button

Robust leather strap

1.

3.

2.

4.

1. Pull the push-d-tu butt.2. Pull the lethe tue fwds d put the bt .3. Push the push-d-tu butt.4. Use the ede f yu hd t tu the push-d-tu

butt lsed utl the bt fts pefetly.


26/33

6

143900 Le-up bts TornaDo

Certified as to EN 15090:2006 F2A HI3 CI SRA.

TORNADO combines the advantages of a lace-up boot with the ease of quick

entry of a slip-on boot. You only have to lace up the boots once the

heat-resistant boot lace fixing maintains the tension from then on. The

additional heavy duty zipper enables the quick entry and exit for daily use.

This top-of-the-range model of lace-up boots is finished on the inside with

Sympatex climate membrane and with an exceptionally abrasion-resistant

high-grade inside lining. This gives the boot both long-term water impermeabi-

lity, and superb perspiration/ moisture dissipation properties, with breathable

activity at the same time. Breathable and watertight!

Qultte beefts:

Inside Sympatex membrane with lining-laminate for long-term water

impermeability and breathable inside climate

High-grade hydrophobic leather

Padded leg, edge-of-leg zone and tongue

Nail-proof Nitrile air-cushion sole

Replaceable, moisture-regulating and washable sole inlay Smoothly operating and long-lasting lace-up-zip system with high

performance plastic zip

Optimal hold by personal fit lacing with Nomex laces

Tongue fastening with Velcro fastener and zip

Seams treated with heat-resistant thread

Silver reflective materials for your safety

Height of leg: 260 mm (size 42) without sole

Form D of the EN 20344:2004 minus 20 mm

Sizes: European Size 36-50

Width 10 (other widths on request)

Weight: 2,77 kg (size 42).

144250 Le-up bts TornaDo wth h sw ptet

Like TORNADO but with additional Kevlar layers between

leather and Sympatex lining. The 3-layer Kevlar-insert provides

limited protection against chain saw accidents.

According to EN 15090:2006. Chain Protection Class 1.


Le-up bt TornaDo wthut membe equest!

143900

144250

Upper leather

Sympatex

membrane

Lining

wate

r

wind

bod

ymoisture


27/33


1

Bts

144000 Ptete slp- fe bts aUSTria

Certified as to EN 15090:2006 F2A HI3 CI SRA.

Fire fighting boots, heavy duty type, made of high-grade

hydrophobic waterproofed black tanned leather. Keeps out

water for 6 hours. Lined throughout with natural coloured

grain leather. All seams are specially impregnated for

maximum water resistance. These boots are not watertight.

Edge of leg and ankle zone are padded for increased comfort.

Leather pull-up loops. Red colour sewing thread and 3M silver

reflective trimmings. Steel toe cap and steel plated midsole

for maximum protection. Antibacterial leather insole, for

optimum moisture regulation. Air-cushioned outsole,

vulcanised, made of special Rubber-Nitrile compound, with

special slip resistant profile, petrol and chemical resistant and

anti-static. The sole is heat resistant up to 180 C. The front

of the foot is rubber capped to protect the upper leather.

Removable, breathable and anatomically shaped insert sole,

washable up to 30 C.

Height of leg: 280 mm (size 42) without sole

Form D of the EN 20344: 2004Availible German Sizes: 36 - 50

Width 10 (other widths on request)


remmeded aesses

f lethe bts TWiSTEr, TornaDo d aUSTria:

143760 replemet set sle

Needle felt. Extreme anti-perspirant and moisture-regulating.

Sole of the foot anatomically formed, washable at 30 C.

Size: 38 48.

143935 Ptet spy

Cleaning agent for leather boots. The leather remains supple

and breathable. Specially recommended for our models

TORNADO and AUSTRIA. Tested and recommended by

Sympatex.

143936 cle et SoLiTairE BriLLanT

Clean, care and impregnation for leather-boots with integrated

membrane. Solvent free. The leather remains supple andbreathable. Specially recommended for our models

TWISTER, TORNADO and AUSTRIA. Tube contents: 75 ml.

143937 niKWaX e kt f lethe ftwe

Conists of cleaning gel, aqueous wax and brush. Maintains the

quality and function of your boots. Cleans the material in

order to revitalise breathability and prepares the leather for

waterproofing.

NIKWAX aqueous wax (neutral) 125 ml - proofs and maintains

the leather without impeding breathability.

144000

143760

143935

143936

143937


28/33

8

FirE FigHTing gLovES cErTiFiED aS ToEn 659:2003

SaFE griP ii fe fht les

Certified as to EN 659:2003These new protective gloves for fire fightersprovide excellent heat and cold protection, excellent touch sensitivity andoptimal fit. Due to the GORE-TEX X-TRAFIT Technology the gloves arewater- and windproof and breathable. As all three layers in the glove areinterconnected, there is no danger of material becoming loose, or slippingwhen putting on or taking off the gloves. Palm side is made of carbon-silicon-coated. NOMEX KEVLAR doubleface fabric for high abrasion, puncture andcut resistance and anti-slip also on wet and smooth surfaces. Ergonomic cutfacilitates excellent touch sensitivity and optimal fit.

Excellent touch sensitivity

Optimal fit due to finger joint folds, ergonomic cut and new material

structure

Abrasion, puncture and cut resistant

Watertight, windproof and breathable

Elastic finger joint folds make it easier for the wearer to grip objects

Outer fabric colour: navy blue

Machine washable: up to 60 C

Sizes: 6, 7, 8, 9, 10, 11 and 12

Weight: 0,32 kg.

142770 Fe-fht les SaFE griP ii WiTH cUFF Cuff with 3M yellow/ silver/ yellow reflective stripes, hook and

eye for connection, adjustable Velcro fastening, breathable

membrane and inner lining. Length: approx. 350 mm.

142780 Fe-fht les griP ii WiTH WriSTLET

100 % Nomex wristlet. Length: approx. 320 mm.

142770

142780

Abrasion resistance (EN 388) 4

Cut resistance (EN 388) 3

Tear resistance (EN 388) 4

Puncture resistance (EN 388) 3

Burning behaviour (EN 407) 4

Convective heat resistance (EN 367/407)

Radiant heat resistance (EN ISO 6942)

Contact heat resistance (EN 702)

Shrinkage (ISO 17493)

Dexterity (EN 420) 4

Removal of gloves (EN ISO 15383)

Water permeability (ISO 15383)

Fluid permeability (ISO 15383)

Chemical permeability (EN 368)


29/33


1

gles

FirE Pro E fe fht les

Certified as to EN 659:2003, and designed as to NFPA 1971.

The Fire Pro E is made of split cow leather, which is extremely supple and

remains supple and flexible even after frequent soaking and drying of glove.

The thumb reinforcement ensures extra protection in this strongly stressed

place. The gloves are waterproofed and breathable.

Material structure:

Upper leather: heat resistant, washable cow leather, water- and oil

resistant

Membrane: water resistant and breathable GORETEX membrane

Inner lining: 100 % KEVLAR

Wristlet: 100 % KEVLAR double-knitted

142884 Fe-fht les FirE Pro E yellw

Colour: yellow upper leather with yellow Kevlar - wristlet

Length: approx. 320 mm

Washable: at 60 C

Sizes: S, M, L, XL, XXL

Weight: 0,32 kg.

142896 Fe-fht les FirE Pro E blue

Colour: dark blue upper leather with black Nomex

- wristlet

Length: approx. 320 mm Washable: at 60 C

Sizes: S, M, L, XL, XXL

Weight: 0,32 kg.

142930 Fe-fht lethe les PaTron FirE

Certified as to EN 659:2003. Suitable for all fire fighting and

rescue operations. Made of 100% special black heat-resistant

and water-repellent cowhide with knuckle and wrist protector,

leather cuff adjustable using Velcro tab, cuff with 25mm width

flame-retardant silver reflective panel, manufactured with

KEVLAR sewing thread, with hook and eye for connection.Insert: water and wind tight and breathable. Inner lining made

of extremely tight knit 100% Kevlar.

Available sizes: 9, 10, 11 (other sizes on request)

Weight: 0,34 kg.142930

142884

142896

Inner lining

GORE-TEX Insert

outer layer

Abrasion resistance (EN 388) 3

Cut resistance (EN 388) 2

Tear resistance (EN 388) 4

Puncture resistance (EN 388) 3

Burning behaviour (EN 407) 4

Convective heat resistance (EN 367/407)

Radiant heat resistance (EN ISO 6942)

Contact heat resistance (EN 702)

Shrinkage (ISO 17493)

Dexterity (EN 420) 3

Removal of gloves (EN ISO 15383)

Water permeability (ISO 15383)

Fluid permeability (ISO 15383)

Chemical permeability (EN 368)


30/33

0

WorKing gLovES

142840 Sfety lethe les BoXEr

Certified as to EN 659:2000. Especially designed for rescue

operations. Limited protection against mechanical and thermal

hazards. Five finger type gloves made of cowhide leather.

Moisture repellent. Made of 1,2 mm thick full grain leather, with

split-grain leather cuffs. Comes with 100% Kevlar lining. One

inch wide reflective wrist panels in high visibility orange colour.

Ring and hook for easy storage. Length: approx. 360 mm.

Available sizes: 10 and 11.

Weight: 0,36 kg.

142915 opet les Fedy F

Certified as per EN 388:2003, performance level 3122. Five

finger type gloves, especially designed for technical assistance,

e.g. operation of saws, rescue tools etc. Provides limited

protection against mechanical and thermal hazards. Palm made of Clarino synthetic leather. Abrasion and puncture

resistant zone made from Armortex. Reinforced index fingers

and thumbs. Double sawn Kevlar seams. High visibility

reflective knuckle area. Elastic closure keeps out glass, dirt, etc.

Highly slip resistant fingertip zones. Stretch design of knuckle

area ensures extremely comfortable fit. Length: approx. 260 mm.

Available sizes: M, L, XL and XXL.

Weight: 0,14 kg.

142900 Lethe wk les FLorian

Meet the requirements of CE 1. Five finger type gloves, made of

soft chrome leather. Length: 350 mm. One size fits all.

Weight: 0,21 kg.

Sfety les griP-TEX

These safety gloves are used especially for handling of broken glass, iron

sheets etc. They are cut resistant and ensure the wearer of a safe grip. One

size fits all.

142300 Wth kt bd, 260 mm long

142400 Wth uff, 300 mm long

SPEciaL gLovES

510302 Elets les 20.000 vlt

Certicied as to EN 60903:2005 class 2. Resistant to oil, acid,

ozone, and very low temperatures. Colour: Beige.

Length: 36 cm. Size 10.

Weight: 0,4 kg.

141995 ispets les

Five finger gloves, made of Vinyl. Suitable for inspection works.

One size fits all. Weight: 0,001 kg.

142503 cheml ptet les caMaPrEn

Please refer to page72.

142840

142915

142900

141995

142300

510302


31/33


1

HEaT ProTEcTion EQUiPMEnTReflective protective clothing which has to offer higher protection than

required in EN 469:2005 is specified in EN 1486:2007. This standard

specifies reflective protective clothing, which provide higher levels of protec-

tion against radiant heat than the non-reflective clothing specified in

EN 469:2005.

Spe f En 1486:2007

This standard specifies test methods and minimum performance require-

ments for reflective protective clothing used in specialised fire fighting. This

clothing provides protection against flame lick and intense radiant heat and

is worn for short periods only, to enable the fire fighter to enter specific

high-risk fire fighting and fire rescue situations which also require the use of

breathing apparatus and head, hand and foot protection.

This standard only covers protective clothing that relies upon the ability of

the outer material to reflect intense radiant heat. This type of reflective

clothing may also be used for industrial applications involving high levels of

radiant heat. The reflective clothing specified in this standard is not covered

in EN 469:2005.

163000 Lht duty het ptet hd

Certified as to EN 531:1998. Made of aluminised Kevlar/

glass fibre tissue. Designed for suitable protection against

flames and heat encountered in fighting fires. Hood designed

to be worn together with a fire helmet. Comes with an

attached breast cover, which ensures a perfect fit. One size

fits all. Attention: Use this product only in conjunction with fire

fighting gloves as to EN 659:2003.

Weight 0,6 kg.

163015 Fe ptet les

Certified as to EN 659:2003. Made of fire and heat resistant

aluminised Kevlar/glass fibre tissue. Palm of glove is made

of highly resistant Sebatan leather. Interior of glove is lined

with Aramide non-woven with a quilted Aramide/viscose

covering. Length: 430 mm.

Weight: 0,34 kg.

16729501 Lht-duty het ptet sut aKv

Certified as to EN 531:1998. This suit reflects approx. 90% of

the radiation heat. It is soft, comfortable and permits fullfreedom of movement during rescue and extinguishing

operations. Reflects radiation heat up to 300 C.

The complete suit consists of

Protection jacket (Order No. 167495)

Trousers (Order No. 167595)

Pair of gloves (Order No. 167700)

HEROS-xtreme silver (Order No. 156807)

Pair of aluminised boots (Order No. 167851)

Sizes: S, M, L, XL

Weight: 6,6 kg.

163000

163015

16729501

Het Ptet Equpmet


32/33

2

165227 Ety Het Ptet Sut S-2

According to EN 1486:2007. Made of a modern and extremely

resistant Kevlar/ Carbon fibre. The fabric is high-vacuum

metallised and reflects 90% of the heat it is exposed to. The suit

consists of a coverall and separate 3-finger gloves, boots and

hood. The hood features a gold vaporised safety compound

glass. The boots feature a heat and flame proof sole, made of

Neoprene. Rucksack type back part for accommodation of a

SCBA set. Comes complete with PU-covered carrying bag.

Standard size for body length of 165 - 190 cm.

Weight approx. 15 kg.

165801 Spe sfety mpud lss

Gold-vaporized. Curved dimensions: 100 x 220 mm.

Weight: 0,38 kg.

ProTEcTivE HooDS

158158 Ptete hd

Certified as to NFPA 1971, 2007 edition UL listed.

100% Nomex double layer hood, single layer pieced bib style,

full hemmed face opening and bottom, flat-lock and seam

construction, sewn with Nomex thread. One size fits all.

Colour: white.


158163 Ptete hd

Certified as to EN 13911:2004. Heat and fire resistant hood,

made of 100% Nomex III, approx. 245 g/m2material. Double

layer hood, single layer piece bib style. Fully hemmed face

opening and bottom. Sewn throughout with Kevlar and Nomex

thread. Can be worn in combination with fire helmets and SCBA

facemasks. One size fits all.

Colour: navy blue.

Weight: 0,1 kg.

165227

165801

158158

158163


33/33

equipos_de_proteccion_personal.pdf

Documents

Transcript of equipos_de_proteccion_personal.pdf