Modeling presentation

Presentation on 3D modeling

Naksha Tech Pvt. Ltd.,73/1A,5th Main,R K Chambers, Chamrajpet, Bangalore – 560 018

Ph: +91 80 26600028www.Nakshatech.com

1

3D Modeling Presentation



http://www.nakshatech.com/


Laser Scanning

2

• Laser Scanning is the process of shining a structured laser line over the surface of an object in order to collect 3-dimensional data. The surface data is captured by a camera sensor mounted in the laser scanner which records accurate dense 3D points in space.

• We uses 3D laser scan surveys to reverse engineering intelligent or non intelligent, accurate as-built 3D models, rapidly and low cost we gives the prospect of affordable 3D models for all clients.

We model:

BIM (Building Information Modeling) Industrial Facility Oil and gas Plant Floor Plans, elevation and cross section Bridges, roads, tunnel and railways Heritage buildings

• Data captured by a 3D scanner is called point cloud. Each point represents one measurement in space.

Work Flow

3

Input Received

Pre-Processing

Production

Estimation Specification

Quality Control

Quality Assurance

Output

Input Received:We receive the data in different format like ( imp, pts, faro, pcg, text, xyz) then we

will convert this to required format.

Processing data:We check the data for point cloud density, registration and any defect or error in the

point cloud. Then we will process it to the working environment.

Production:We are having individual experts for modeling in specialized categories. We divide

the work in individual category and later we will merge into single file. Then it will go to QCprocess

Detailed Work Flow

4

Quality Control:

Data will be checked for quality as per client specification, and will check forclashing and missing objects. Later file will send back for correction.

Quality Assurance:

We will take a small part of completed data for quality check and we will checkwhether it meets to client expectation, based on the acceptance ratio we will deliver theproject if not we will send it back to production for corrections.

Output Delivery:

We will deliver the data in required format.

Autocad *.dwgMicrostation *.dgnCyclone *.coeOther formats *.stp, .igs, .ifc etc.

We also work on BIM projects using Revit Software

Revit ArchitectureRevit MEP 5

Autocad Modelling

Output : AutoCAD drawing file (dwg).

Input : Cyclone database (Imp)

Scope of work : 3D façade modeling of

historical building

6

AutoCAD Modelling

Output : AutoCAD(dwg).

Input :*.imp

Scope of work : 3D Interior modeling

of historical building.

Area : 2715 Sq Feet

7

Cyclone Modelling

Output : Cyclone object exchanger

(*.coe).

Input : Cyclone database (*.Imp)

Scope of work : 3D modeling of oil and

gas plant.

8

Revit Modelling

Output : Revit file (*.rvt).

Input : *.pts

Scope of work : 3D modeling of MEP ,

structure and Architecture of congested Mechanical room.

Industrial Facility

Area: 2800 Sq Feet

9

Revit Modelling

Output : Revit file (*.rvt).

Input : rcp

Scope of work : 3D Architecture and

structural modeling of Railway station.

BIM

Area: 25300 Sq Feet

10

Revit Modelling

Output : Revit file (rvt).

Input : rcp

Scope of work : 3D Architecture,

structural and MEP modeling of congested mechanical room.

BIM

Area : 3200 Sq Feet

11

AutoCAD Modelling

Output : AutoCAD(dwg).

Input : las


structural and MEP modeling of Fruit storage unit.

Industrial facility

Area : 134330 Sq Feet

12

Revit Modelling

Output : Revit(*.rvt).

Input : *.rcs


structural and MEP modeling of gas station.

Industrial facility

13

AutoCAD Modelling

Output : *.dwg.

Input : *.xyz

Scope of work : 3D modeling of gas and

oil plant.

Oil and Gas

14

PDMS Modelling

Output : *.txt.

Input : *.pts

Scope of work : 3D primitives modeling

of pipe, structure, electrical, civil of oil and gas plant.

Oil and Gas plant

15

Thank You



16


Modeling presentation

Documents

Transcript of Modeling presentation